WorldwideSax - Sellers of  Fine Vintage Saxophones

Everett, WA 98203

U.S.A. 

 

E-mail Chadd with questions: 

  WorldwideSax@Gmail.com

WorldwideSax.com is a Vintage Saxophone repair shop that also buys, completely rebuilds and resells Vintage Professional Saxophones. I also do Rebuilds and Restorations for customers from all over the world.

WWS is a by appointment only specialist, not a "music store". Customers can see and hear what is available on this website.

 

NOTICE: You are viewing the old WWS website.

(Inventory is out of date. In your http address, you'll see "old" for these

WWS archives. We wanted to keep this live for saxophone research.)

For current inventory and services, please see: www.WorldwideSax.com

 

For 2016 Work Schedule

Scroll Down

Up
Rebuild Info
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

 

Follow us, and      

get Inventory Updates

 

Work Schedule 2016

On-going '16 side project:

Conn Chu Tenor-Super Gigger Custom

WWS horn #211k gets Custom Rebuild  with custom RED roo pads, maxed out Silver resotech resonators, Premium upgrades, keywork fabrication...etc

In Progress/On Hold

 

1-5-16 Conn 10M Tenor:

Worldwide Sax horn #349k gets a Vintage Standard Rebuild with natural cork throughout for customer, and neckstrap moved. Long

Complete 

 

~LIMITED AVAILABILITY~ 

1-25-16

"The Martin Alto" Full  Standard Rebuild

Hurwitz

Complete

 

2/5/16 - 2/17/16

  Gold Restoration, Martin Typewriter alto: Customer horn returns from plating to get assembled and put together! I can't wait! Hurwitz

martinTypewriterprocesstoEngrave.jpg (1025781 bytes)

In Progress

 

~LIMITED AVAILABILITY~ 

 

2-25-16 King Zephyr Alto: Worldwide Sax horn #322k gets a Vintage Standard Rebuild with natural cork throughout for customer. Chant  Complete

 

3-16-16 Nickel plated CONN 6M alto: Worldwide Sax horn #249k gets a Vintage Standard Rebuild with natural cork throughout for customer. Griffin

Complete

 

5-9-16 Buescher "Big B" Silver alto: Customer horn gets a Vintage Buescher Rebuild with snap in pads and natural cork throughout, repair octave trigger too. Dickson Complete

 

6-15-16 Gold plated Conn "Artist" New Wonder II alto: Worldwide Sax horn #234k gets a Custom Rebuild with Chocolate Roo pads, and custom Resotech Gold, oversized resos with cork throughout. Donnelly Complete

 

6-26-16 KING SUPER 20 ALTO: Worldwide Sax horn #367k gets a Special Rebuild with Black Roo pads, premium upgrades, FOR CUSTOMER. Martin Complete

 

8-4-16 Original Lacquer CONN 6M alto: Worldwide Sax horn #279k gets a Vintage Standard Rebuild with natural cork throughout for customer. Leung

Done

 

8-11-16 Conn C-Melody: 

Customer sax #97k. Customer sax gets a WWS Rebuild with Black Roo pads, and 60%+ flat metal resos, and new stainless springs.  Mattina

Complete

 

8-20-16 Silver Restoration - Aristo 1 Tenor: Customer sax assembly after 3years of progress. Sax gets a WWS Rebuild.

Havenfield

Complete

 

10/20/2016

Buescher TT BASS: WWS/Customer sax #145k. A WWS Inventory sax to be restored for customer. Setup TBD--customer Brass Resos.  Pearson

In Progress

 

11/1/16 SML Reynolds Contempora Tenor: WWS horn gets a Sarge Premium Rebuild with black roo pads, Silver Resotech resonators, Premium corks and felts for customer. Felix In Progress

 

 

11-25-16 Slot Open

 

 

12/10/2016

The Martin Tenor:

Customer horn gets a Vintage Standard Rebuild with natural cork throughout, replace missing key, and "Acid Bath +" treatment. McCarthy

 

 

12-20-16 Slot Open

 

- 2017 -

 

1-5-17 Slot Open

 

1-20-17 Slot Open

 

2-5-17 Slot Open

 

DATE TBD Buescher Silver C-Soprano: customer sax #155k  Crosby

 

If you wish to schedule a rebuild, or purchase one of the saxes (and it still needs to be rebuilt),  send me a 50% deposit to hold your place in the work schedule.  I work from a published schedule (see left margin) so that your sax will only be out of your possession a couple weeks, while i do the actual work, it does not have to just sit on the shop floor, until its turn comes up... you send it to arrive on schedule and we return it on schedule.

  E-mail chadd with  questions about our vintage saxes at:   worldwidesax@gmail.com  

Payment Options:

...Cash...or ...Check...

... Wire Transfers ($15)

... Paypal (3.5% fee)

  ~"Here" in shop (2.7%)

...ClearXchange! 

 

 

Sure Pay/ClearXchange: The newest Bank-to-Bank $ transfer option by mobile phones to send money to our Email address! No fees attached! Perhaps THE way of future banking and payments. Use: WorldwideSax@Gmail.com

(Wells Fargo, Bank of America, Chase...)

 

NEW: Check out the 

" VIP Scout List "

 

 

  If  a horns says "just rebuilt", then it's ready to go, saxes that say "scheduled for a rebuild" are waiting for the work to be done, but it will be included in the posted price.  If a sax says "ON TRIAL" someone is taking advantage of the "Three Day Trial" policy (See Info and Orders page).

 

Saxophone Comparison Chart 

Some of the best vintage saxes of all time

(and SOUND FILES)

 

Here is a pic of some custom resonator work. The reso can be sized to your tonehole, or whatever you would like.

RESOS.JPG (101033 bytes)

I can get you virtually any resonator ordered. Sarge's favorite was the  Resotech solid silver reso.

WWS_Pad_Options11-2013.jpg (600304 bytes)

Check out Sarge's Tribute page...

Sarge's Page

 

 

 

WE  DO GOLD AND SILVER ELECTRO-PLATING

That's right! 

We have a:

 GOLD STAR

Pro plating system

Goldstar-LLXL.jpg (59795 bytes)
The Industry's Premier Silver and Gold Plating System 

 Ask about having us Plate your Bell interior in
24 carat or  ROSE GOLD 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive  

It is our business to Rebuild your sax or sell ours as Fully Rebuilt Saxes. We never sell our stock "As-Is". We are Restorers.

 

If you wish to schedule a rebuild, or purchase one of our saxes and it still needs to be rebuilt,  send us  a 50% deposit and we will schedule its rebuild before any of our other worldwidesax.com inventory. 

DukoffMPCs.jpg (402000 bytes)

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

Everybody loves these new Kangaroo skin pads, aka Saxgourmet  Pads and you can get them from Curt, at musicmedic.com you can request that any WWS stock be rebuilt with them, or just click this link and order some for yourself.

 

 

Check out our newest pages...

 

Create an Order:

SAX or REBUILD

 

 

 

MISC. For SALE

 

 

 

Sarge's Page

 

 

 

Only Saxophones

 

 

 

Things I Should

Have Kept

 

 

 

Sarge's Collection

 

 

 

Chadd's Collection

 

 

 

Cool Stuff

 

 

 

MUSEUM

ARCHIVE

 

 

 

Hard to find:

Here is a helpful outline of SML serial Numbers:

S.M.L. Serial Numbers:

0001 – 3000  /  1934 to 1940

3000 – 5500  /  1940 to 1945

5500 – 8000  /  1945 to 1950

8000 – 12000 / 1950 to 1955

12000 – 16000  /  1955 to 1960

16000 – 19000  /  1960 to 1965

22000 – 24000  /  1970 to 1975

24000 – 26000  /  1975 to 1980

26000 – 27000  /  1980 to 1982

 

SML Stencils:

HINT: no one ever says that these models play "bad".

(I have seen that many are connected to the Gold Medal era and into the King Marigaux era. Rev D era ones are very rare. WWS 'seen' examples are noted with their serial number.)

Pitchard Artist 

(#19k GM)

A.Cojan

 (#21k--UNIQUE: with F#!, unique for the early number!, with Rev D guards, GM engraving, Marigaux F#.)

Reynolds Contempora 

(#19k GM)

Jen Co Harmonica 

(#8k, Rev D)

Alexandre 

(#10k Rev D)

"The Woodwind Co." 

(#14k Rev D)

Vedette

(#20k, GM)

 

Here is a helpful outline of Keilwerth serial Numbers:

Keilwerth Serial Numbers:

1925:   0-800 

1933-5:     9000     

1941:  18,500

1947: #20,000

1953: #23,000

1958: #28,000

1960: #38,000

1962: #43,000

1964: #49,000

1966:  #55,000

1971: #69,000

1975-6?: #79,000

1977: #81,000

1986: #91,000

1993: #99,100

1996: #104,000

1998:  #109,000

2004:  #119,000

Keilwerth made The New King and Tone King  as their main brand names, from 1932 to 1969 or so, but there were always stencils, like Edgeware and later Couf.  Here are few of the other names you may find on Keilwerth made horns.  The New King and Tone King saxes were identical except for a high F# key on the tone king model, but keilwerth marketed the Tone King as the "deluxe" Pro model and the New King as the "standard" Pro model

Known Keilwerth Stencils:

Couf Superba 1 & 2

 Royalist

Conn DJH

Buffet

Edgeware

Marco

Vincent Albert

Martelle

Winsall

Tam

Bundy Special

(H&A Selmer)

(La Sete - seen: baritone/soprano)

Armstrong

Heritage

King Tempo

Champion

Calvert Deluxe

Silvertone

Hammerschmidt (sopranos)

Jean Barre Artist (seen Alto

Princeton (seen Alto)

American Master (seen Alto)

 

Keilwerth copiers, such as Amati,  Dörfler & Jörka (1949 to 1968, then purchased by Keilwerth) and B&S

H.Genet

Roxy

Jubilee

Voss

Silvertone

Rene Dumont

Keilwerth relatives:

Max Keilwerth and Richard Keilwerth (Graslitz) made saxes under the names:

 

Weltklang (baritones only)

Senator

Hohner

 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

Here is a handy chart for King ZEPHYR series:

Zephyr and Zephyr Special
Zephyr, "Series I": 

s/n 170xxx to 180xxx
Zephyr, "Series II": 

s/n 180xxx to 237xxx

Zephyr Special: 

s/n 200xxx to 280xxx
Zephyr, "Series III": 

s/n 237xxx to 305xxx
Zephyr, "Series IV": 

s/n 305xxx to 423xxx
Zephyr, "Series V": 

s/n 423xxx to 540xxx

1945 was the beginning of King's  Super 20 (s/n 272xxx)
and Zephyr "II"s (s/n 272xxx)

Here is a handy chart for King SUPER 20 series:

1945-1949 "Series I":

#272xxx to 295xxx

Tranny "Series Ia":

#295xxx to 305xxx
1950-1951 "Series II":

#305xxx to 340xxx
1955-1962 "Series III":

#340xxx to 380xxx
1962-1967 "Series IV":

#380xxx to 426xxx

Factory moves to Eastlake
1967-1975+/-  "Series V":

#426xxx to 540xxx

1975 "Series VI":

<1975? era debate 1975+?

#540xxx to 800xxx

 

 

Acid+Treatment_example.jpg (1383010 bytes)

 

Past Work Schedule 2010:  

4-13-10  Gold Plated The Martin Soprano 64,xxx:   Done

4-18-10 Silver The Martin Tenor 184K "USMC":  Done

5-7-10 Buffet SDA Alto 18K:  Done

5-14-10 Armstrong Low A Baritone: Done

5-25-10 Conn 10M  Done

5-28-10 Martin Committee 2 Alto: WWS Done

6-1-10 J. Keilwerth 1934 New King Alto:  Nickle plated  Done

6-11-10 The Martin Alto:  Done

6-17-10 Silver Buescher Big B:  Silver plated WWS horn gets a Standard Vintage Rebuild with flat metal resos for customer. Done

6-24-10 1948 Conn 6m Naked Lady: Done

7-2-10 Buescher 400 Tenor #505K WWS horn gets a Standard Vintage Rebuild with Prestini rivetless dome metal resos. WWS Done

7-8-10 1928 Silver Conn Chu Alto:  Customer horn gets a Standard Vintage Rebuild with flat metal resos. DONE

7-20-10 King Super 20 Alto #415K:  WWS horn gets a Standard Vintage Rebuild with flat metal resos. WWS Done

7-28-10 Conn 6m:  customer horn gets a Standard Vintage Rebuild with flat metal resos. Done

7-28-10 1945 The Martin Tenor:  WWS horn 153K gets a Standard Vintage Rebuild with Seamless Domed resos. WWS Done

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

NEW: Check out the 

" VIP Scout List "

8-5-10 Buescher Aristo "156" Tenor #338K Done

8-12-10 1953 SML Rev D #10K Chadd horn gets a Vintage Standard Rebuild with Presini pads, some Premium upgrades, minor fabrication work, and some plating restorations.  Done

8-13-10 1972 Selmer Mark VI alto #208K WWS horn gets a Vintage Standard Rebuild with Presini pads and natural cork throughout. WWS Done

8-27-10 1940 Conn 26M alto:  Customer horn gets a Premium Vintage Rebuild with White Roos & Seamless Flat resos. Done

9-7-10 1952 King Zephyr Alto WWS horn 328K gets a Standard Vintage Rebuild. WWS Done

9-23-10 Buescher Big B Tenor #322K WWS horn gets a Standard Buescher Rebuild with Buescher snap in pads and natural cork throughout for customer. Done

6-17-10 Silver Buescher Aristocrat #280k:  Silver plated WWS horn gets a Standard Vintage Buescher snap-in Rebuild with original metal resos.  WWS Done

10-15-10 1960s LeBlanc Rationale Tenor WWS horn gets a Vintage Standard Rebuild with Presini pads. Sarge/WWS Done

10-22-10 1953 SML Rev D #10K WWS horn gets a Vintage Standard Rebuild with Presini pads for customer. Done

10-26-10 1940 Martin Comm 2 alto Chadd horn gets a Vintage Standard Rebuild with Presini pads, some Premium upgrades for customer. Done

11-4-10 Buescher Aristocrat Alto #345k:  WWS horn gets a Standard Vintage Buescher snap-in Rebuild with original metal resos.  WWS Done

11-4-10 Buescher Big B Aristocrat Tenor #317k:  WWS horn gets a Standard Vintage Buescher snap-in Rebuild with original metal resos.  WWS Done

11-18-10 Silver Conn Chu alto:  Customer horn gets a Standard Vintage Rebuild with flat metal resos. Childs Done

12-2-10 Buescher Big B Aristocrat Alto:  WWS horn gets a Standard Vintage Buescher snap-in Rebuild with original metal resos.  WWS Done

12-14-10 The Martin Tenor #208k:  WWS horn gets a Standard Vintage Rebuild with flat metal resos and rivet center.  WWS Done

12-17-10 Nickel Conn Chu Tenor:  WWS horn gets a Vintage French Standard  Rebuild with plastic resos. WWS Done

Up
Rebuild Info
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

    Please e-mail or phone us for   additional   descriptions or  JPEG's  of  any  of  our current  inventory,  or if  you don't   see   something   you would  like  to  have,  let  us know.
     Unlike some web shops, we will  try  to list all  of  our current inventory and prices so  you  can  see  and  shop here  in  our  virtual  store.

     We  have  a  long  list  of customers  you  can  e-mail for references. (see References Page)
    Thanks,  for  visiting Worldwide Sax.  

~~Chadd&Steve~~

Past Work 2011:  

1-1-2011 H.Couf Superba 1 Tenor:  Customer horn gets a Standard  Vintage Rebuild with Pisoni rivetless dome metal resos. Thaut  Done

1-4-11 1938 Buescher Aristocrat series 1 Tenor:  WWS horn gets a Vintage Buescher Snap-in Rebuild with natural cork throughoutWWSDone

1-19-11 1940s Buescher Aristocrat Alto:  Customer's alto neck gets pull-down repair and dents removedGarcia Done

1-19-11 Conn "tranny" Chu alto:  WWS horn gets a Vintage Rebuild with natural cork throughout and Sherry Huntly EngravingWWS Done

1-28-11 Conn 6m alto:  Customer horn gets a Vintage Rebuild with natural cork throughoutHarford Done

2-5-11 King Super 20 alto - pearls:  WWS horn gets a Vintage Rebuild with premuim extrasWWS Done

2-22-11 King Super 20 tenor - pearls:  Customer horn gets a Vintage Rebuild with oversized Noyak resos on Black Saxgourmet Roo padsAtkinson Done

2-23-11 Buescher 400 Tenor 429K:  WWS horn gets a Vintage Buescher Snap In rebuildWWS Done 

3-10-11 Conn Gold C-Soprano 98K:  WWS horn gets a rebuild for customer with silver Resotechs to be gold plated & Premium UpgradeGast Done 

4-7-11 King Super 20 tenor --full pearls Sax gets a Vintage Rebuild with premium extras and seamless flat resosSarge Done

4-14-11 Conn Chu tranny tenor:  Customer horn gets a Vintage Rebuild with oversized Resotech resos on Black Saxgourmet Roo pads and a Premium Upgrade and New stainless steel springsMattina Done

4-21-11 Buffet S-1 Tenor Sax gets a Vintage Rebuild with premium extras and seamless flat resosSarge Done

5-10-11 Vintage YAS-62 purple label:  Customer horn gets a French Standard rebuild with plastic dome resosTebo Done

5-13-11 Vintage Dolnet #24K:  WWS horn gets a French Standard rebuild with Flat Metal resosWWS Done

5-19-11 Selmer Mark VI alto:  Customer horn gets a Silver Restoration with a French Standard rebuild with plastic dome resos and full Spring ReplacementZax Done

6-3-11 Selmer Mark VI Tenor:  Customer horn gets a French Standard rebuild with plastic dome resos and swedgingLayer Done

6-20-11 Silver Buescher TrueTone IV Alto:  Customer horn gets a Vintage Standard rebuild with Buescher Snap In PadsTarvin Done

7-1-11 King Saxello customer horn gets a Vintage Standard Rebuild. Zax Done

7-15-11 Silver Conn curved Soprano: WWS horn gets a Vintage Standard Rebuild after chemical Lacquer stripping, for customer. Luchtan Done

7-29-11 Silver Conn 26M alto:  WWS horn gets Rebuilt and some much needed TLC. WWS Done

8/7/11--8/13/11 TIME OFF

8-15-11 1935 Conn 10M tenor: WWS  horn gets a Vintage Standard Rebuild for customer.

Oleru Done

8-16-11 The Martin Tenor 1953:  Customer horn gets Vintage Standard Rebuild. Neilo Done

8-29-11 King Zephyr alto WWS (OS) horn gets a Vintage Standard Rebuild for customer. harrson/Keller Done

9-1-11 Maintenance & School Prep 

 

9-10-11 Maintenance & School Prep 

 

9-20-11 Martin Committee II alto: Customer horn gets Vintage Standard Rebuild.Siboliban Done

 

10-1-11 Martin Committee I alto: Customer horn gets Vintage Standard Rebuild + a new custom screw rod. Siboliban Done

 

10-18-11 Martin Committee III "The Martin alto": WWS horn gets Vintage Standard Rebuild for customer. Zink Done

 

11-1-11 H&A Selmer Bundy Baritone: WWS horn gets Vintage Standard Rebuild for customer with domed metal resos for customer. Snowhill Done

 

11-13-11 Mark VI alto:  Silver Restoration Returns from Andersons. Customer horn gets a with a French Standard rebuild with Metal dome resos and full Spring Replacement with Rose Gold Plating AccentsZax Done

 

12-6-11 Buescher Big B Baritone: WWS horn gets Vintage Standard Rebuild with metal-backed pads and natural cork throughout. Aaberg Done

 

12/22--31/11 TIME OFF

NEW: Check out the 

" VIP Scout List "

 

~  2012  ~

 

1-3-11 Conn Gold Artist "Harp" alto: WWS horn gets Vintage Standard Rebuild for customer. Seward Done

 

1-17-12 Buescher Big B Tenor: Customer horn gets Vintage Standard Rebuild with metal-backed pads and natural cork throughout. Williamson Done

 

2-1-12 SML Rev D Alto:

Customer horn gets Vintage Standard Rebuild with prestini pads and natural cork throughout, + custom key fabrication. Heine Done

 

3-8-12 The Martin Tenor:

WWS horn gets Vintage Standard Rebuild with prestini pads and natural cork throughout for customer. Gillette Done

 

3-16-12 Buffet Super Dynaction Tenor: WWS horn gets Vintage Standard Rebuild with prestini pads and natural cork throughout for customer. Croasdale Done

 

3-28-12 Conn baritone?:

Customer horn gets Vintage Standard Rebuild with prestini pads and natural cork throughout for customer. Tarvin Canceled

 

3/29--4/16/12 TIME OFF

 

4-26-12 Martin Committee I Alto: Customer horn gets Vintage Standard Rebuild with prestini pads and natural cork throughout for customer. Lindberg Done

 

5-10-12 Buffet SDA Alto #18,7xx: WWS horn gets Premium Rebuild with Saxgourmet Black Roo pads with Noyak resonators for customer. Sheedy Done

 

5-31-12 Silver/nickel The Martin Alto: WWS horn gets vintage standard rebuild with new stainless steel springs, Rose-gold wash bell. Krause Done

 

6-21-12 Silver The Martin Tenor: WWS horn gets Vintage Standard rebuild for customer plus custom thumb hook, post repairs. Evans Done

 

6-27-12 The Martin Tenor, Official Music Man Model: WWS horn gets Premium Standard rebuild for customer with Saxgourmet Roo Pads. Tuncel Done

 

7-3-12 Selmer Super Balanced Action Tenor: gets Premium Standard rebuild for customer with tan pads and domed metal resos50%+. Maxwell Done

 

7-13-12 The Martin Tenor: 

Customer horn gets a Premium Rebuild with prestini pads and seamless flat resos, and custom work. Leisenbach Done

 

7-27-12 B&S Blue Label alto: WWS horn gets Vintage Standard rebuild (premium) for customer and custom pearls installed. Incorvaia Done

 

8/2--8/5/12 TIME OFF 

 

8-6-12 Buescher "The Aristocrat" alto: WWS horn gets a Vintage Buescher rebuild with original snap-on pads and natural cork throughout. Complete

 

8-10-12 Selmer Balanced Action alto: Customer horn gets Vintage Standard rebuild  for customer with stack swedging and screw replacements and minor fabrication. Suhling Done

 

8-22-12 Silver Conn Chu Alto: WWS horn gets Vintage Standard rebuild (premium) for customer, with neck octave key work and swedging throughout. Hayes Done

 

9/1--9/12/2012 School Prep

 

9-13-12  Conn 6M viii alto: WWS horn gets Vintage Standard rebuild  for customer with natural cork throughout and case solving. O'Brien Done

 

9-28-12 Gold Plate SML Rev D Tenor: WWS horn gets The Sarge Special rebuild (Premium) for customer, with gold plated domed Resotech resonators on Black Saxgourmet Roo pads. Ester Done

 

10-12-12 Silver Selmer " Model 26"  Tenor: Customer horn gets a Vintage Standard Rebuild with neck repair and oversized flat resonators with rivet. Verver  Done

 

10-31-12 Selmer Mark VI alto: Customer horn gets a Vintage Standard Rebuild with Saxgourmet Roos with original resos. Premium? Spring Replacement?. Johnson Done

 

11/3--11/14/12 TIME OFF

 

11-16-12 Conn Virtuoso Deluxe C-Melody 8M: Customer horn gets a Vintage Standard Rebuild with White Roos for consignment sale. Emmons- Catalano  Done

 

11-23-12 The Martin Alto: Customer horn gets a Vintage Standard Rebuild Natural cork throughout. Machin Done

 

12-6-12 Conn 10M Tenor: WWS horn gets Vintage Standard rebuild  for customer with natural cork throughout. Ruud Done

 

12-17-12 Conn Artist Soprano in gold plate: Customer horn gets a Vintage Standard Rebuild Natural cork throughout and Saxgourmet Roo pads. Woodmancy Done

 

12/21--1/2/13 TIME OFF

Christmas Break

 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

 

The Work Schedule 2013:  

1-7-13 Conn 10M, silver 1945 Tenor: WWS horn gets Vintage Standard rebuild  for customer with natural cork throughout. Smith  Done

 

1-10-13 Buescher 400 alto: WWS horn gets Vintage Buescher Rebuild  with snap in pads and natural cork throughout. Done

 

1-18-13 SML Rev D Alto: Customer horn gets a Vintage Standard Rebuild with oversized flat resos, Natural cork throughout and acid bath. Pearson Done

 

1-29-13 The Martin Baritone: WWS horn gets Premium Rebuild  for customer with vintage standard resos and tan pads. Bogle/Ryba Done

 

2-21-13 King Zephyr Tenor #308k: WWS horn gets Vintage Rebuild  with seamless flat resos and Black Roo Pads! WWS Done

 

3-1-13 Buescher 400 TH&C alto: WWS horn #306k gets Vintage Buescher Rebuild  with snap in pads and natural cork throughout. WWS Done

 

3-13-13 1960s Selmer Mark VI alto: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and plastic resonators. Adams Done

 

3-25-13 1952 Selmer Super Balanced Action Baritone Low A: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and metal resonators. Hanan Done

 

4/1--4/7/13 TIME OFF

 

 

4-29-13 Buescher 400 TH&C alto: WWS horn #306,44x gets Vintage Buescher Rebuild  with snap in pads and natural cork throughout for customer. Lindberg Done

 

5-2-13 King Silversonic Tenor: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and metal resonators. Gifford Done

 

5-16-13 Martin Imperial Baritone: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and metal resonators; and new blue steel springs. Johnson  Done

 

6-1-13 The Martin Alto: WWS horn #163k gets Vintage Standard Rebuild  with tan pads, flat resonators and natural cork throughout. Done

 

6-18-13 Conn New Wonder Alto: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and flat metal resonators. Fisher Done

 

7-1-13 Silver Conn 6M VIII alto: WWS horn #314k gets new GOLD plate in bell and a Vintage Standard Rebuild  with tan pads, flat resonators and natural cork throughout for customer. Balk  Done

 

7-11-13 Selmer Balanced Action alto: Customer horn gets a Vintage Standard Rebuild with tan Prestini pads and plastic domed resonators. Backman Done

 

8-7-13 The Martin Tenor, Official Musicman Model:

WWS horn #214k gets a Vintage Standard Rebuild  with Black Roo pads, seamless flat resonators +50%, and natural cork throughout for customer. McKeirnan Done

 

8/19/13--8/30/13 

Two weeks School Prep

 

9-1-13 Selmer Balanced Action alto: Customer horn gets new springs Backman Done

 

9-2-13 Conn C-Soprano: 

WWS horn #117k gets a Vintage Standard Rebuild  with flat resonators +50%, and natural cork throughout for customer. Lindberg Done

10-3-13 Buescher Tipped Bell Bb Soprano: WWS horn #204k gets a Buescher Standard Rebuild  with snap in pads, and natural cork throughout for customer. Zax Done

 

10-15-13 Conn Gold C-Melody: WWS horn gets a prepared for customer. Lindberg Done

 

10-29-13 The Martin Alto: WWS horn #163k gets Vintage Standard Rebuild  with tan pads, flat resonators and natural cork throughout. Done

 

11-1-13 Selmer Mark VII alto: Customer horn gets a Vintage Standard Rebuild with plastic resos and natural cork throughout. Rachmiel Done

 

11-21-13 Selmer Mark VI Tenor 205k:  Customer horn gets a Vintage Rebuild on Saxgourmet Roo Pads with seamless domed metal resos at 60%+ and natural cork throughout, also some neck repair. Coile Done

 

12-10-13 Conn Curved Soprano: WWS horn #57k gets Vintage Standard Rebuild  tan pads, flat resonators and natural cork throughout for customer. Eberhard Done

 

12/22/13--1/1/13 

TIME OFF - Xmas Break

 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

 

Schedule 2014:  

 

1-16-14 Buescher TrueTone Baritone:  customer horn #224k gets Vintage Buescher Rebuild  with snap-in pads, natural cork throughout, acid bath and clean up work. Cantrael Done

 

2-4-14 Buescher Tenor: Customer horn #13k gets TLC and Buescher Standard Setups for customer. Balk Done

 

2-24-14 Buescher Big B alto: Customer horn gets a Buescher Standard Rebuild with Snap-in pads and natural cork throughout for customer. Strassmaier Done

 

3-1-14 Buescher "The Aristocrat" series 1 Tenor: WWS horn #278k gets Vintage Buescher Rebuild  with snap-in pads, natural cork throughout for a customer. Gore Done

 

3-10-14 1952 Selmer Super Balanced Action Low-A Baritone: Consignment horn gets a Custom Rebuild with tan pads, resotech resos, natural cork throughout with some premium upgrades for customer. Vitale Done

 

3-24-14 Conn Chu Berry Alto: Customer horn gets a WWS Vintage Standard Rebuild with Prestini Pads and natural cork throughout. Miranda Done

 

On-going '14 side projects:

King Saxello

WWS horn #76k gets Vintage Rebuild  with black roo pads, and some Premium upgrades.

Done

 

4-14-14 Selmer Mark VI Tenor: Customer horn #183K gets a WWS Vintage Standard Rebuild with Prestini Pads and natural cork throughout, spring replacements. Vogelgesang 

Done

 

5-9-14 1980s Vito Low-A Baritone: Customer horn gets a WWS Rebuild with tan pads, large metal resos, natural cork throughout. ASD

Done

 

5-29-14 "The Martin Tenor": WWS horn #158k gets Vintage Standard Rebuild, body metal cleaning, Tan pads and flat resos with natural cork throughout for a customer. McDonaldDone

 

6-5-14-Side schedule: Julius Keilwerth Tone King Tenor: previous WWS sax returns for cosmetic work and tune-ups. Silver spot plating and Goldwash bell. Balk DONE

 

6-10-14: "The Martin Tenor": WWS horn #187k gets Vintage Rebuild  with black roo pads, custom resotech resonators,  natural cork throughout and some premium upgrades for a customer. Axton In Progress

 

6-25-14: Selmer New Largebore, gold plated Tenor: WWS/customer horn #13k gets Vintage Rebuild with original metal resonators,  natural cork throughout and some premium upgrades for a customer. Maxwell Done

 

7-2-14 Buescher Big B alto:

WWS horn #328,1xx gets Vintage Buescher Rebuild  with snap-in pads, natural cork throughout for a customer. Bertrand Done

 

7-12-14 Selmer Mark VI Alto: WWS horn #101K gets Vintage Selmer Rebuild with original plastic resos, custom Premium upgrades, natural & tech cork throughout for a customer. Lindberg Done

 

7-22-14 Selmer Super Action 80 series II alto: 2004 customer horn gets Premium Rebuild with Saxgourmet Roo pads,  tech cork, ultra suede etc... and silver Resotech resonators for a customer. Simonishvili Done

 

AUGUST-2014 

SHOP CLOSED:

 

On-going '14 side projects:

Conn Chu Tenor-Super Gigger Custom

WWS horn #211k gets Custom Rebuild  with custom RED roo pads, maxed out Silver resotech resonators, Premium upgrades, keywork fabrication...etc

In Progress

 

Sept./ Oct./Nov. 2014 

SHOP CLOSED:

--MOVING!--CLICK

 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

 

~~ 2015 ~~

 

4-1-15 Silver Bundy Special Baritone: custom help for a customer horn. shipping damages. (non rebuild) JOHNSON

 Complete

 

4-12-15 Buescher Silver C-Soprano: customer sax #155k  Crosby

 

4-19-15 King Zephyr Special Alto: WWS horn gets Rebuild  with upgrades for a customer. Keen Done

 

5-9-15 Buescher Big B Alto: Customer horn  Dize Done

 

6-1-15 Buescher Big B Alto: Customer horn  Nordmann

  Done

 

6-13-15 H. Genet Tenor: WWS Horn for Customer Meyers Done

 

6-19-15 Martin Committee 1 alto: Customer horn #116K gets Standard Vintage Rebuild  with 50% resos, natural cork throughout for a customer. Hodgson  

Done

 

7-20-15 Selmer Mark VI alto: Customer horn #147K gets Standard Vintage Rebuild  with reused resos, natural cork throughout for a customer. Harned 

Done

 

7-29-15 Conn Chu Berry Tenor: Customer horn #236K gets Standard Vintage Rebuild  with 50% resos, natural cork throughout for a customer. Parashes  Done

 

8-22-15 Silver Restoration - Aristo 1 Tenor:

Havenfield 

  In Progress

 

8-15-15 King Super 20 Alto: WWS horn #427K gets Standard Vintage Rebuild  with 50% resos, natural cork throughout for a customer. Rarden  Complete

 

9-5-15 Conn Chu-tranny Tenor #166k: WWS horn #166K gets Standard Vintage Rebuild  with 50%+ resos, natural cork throughout for a customer--no silver polishing. Donnelly Complete

 

SEPTEMBER-15 

BACK-TO-SCHOOL

Local Repairs

 

10-15-15 SML Rev. D tenor: WWS horn #9K gets Custom Rebuild  with gold resotech resos, premium upgrades for a customer. Uchiya Complete

 

10-29-15 1919 Buescher Curved Soprano: WWS horn #61K gets a Vintage Rebuild  with seamless,.  metal resos, and natural cork for a customer. McInnis

Complete

 

11-15-15 1956 Selmer Mark VI Tenor: WWS horn #65K Vintage Rebuild  with flat metal resos, and natural cork for a customer. Nik 

Complete

 

12-5-15 Special Orders: Christmas prep...

 

12-12-15 Buescher Big B alto:

Customer horn gets a Vintage Buescher Rebuild with natural cork throughout--Jan 2 pickup. Reynolds 

Complete 

 

HOLIDAY BREAK

Dec. 22, 2014 - Jan. 2, 2015

 

Home
Rebuild Info
Sax Mouthpieces
Alto Saxes
Tenor Saxes
Bari Saxes
Soprano Saxes
C-Melody
F.A.Q's
WWS Info & Bios
Our Finest
Virtuoso Deluxe
References
About Relacquers
STUDENTS
Museum Archive

Alto Mouthpieces

 

Mouthpiece HOME

Purchase Mouthpiece Alto Tenor Baritone Soprano Other Ligatures Bob's Page

Organized by Alphabetical Brand-Name order, then by price 

 

*** "OTHER" now listed at alphabetical spot "O"

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

BERG LARSEN:

Berg Numbers: [TIP] - [Baffle] (0 brightest, to 3 darkest) - [Facing Length] (SMS short, M longer)

 

altompcBerg80-3-M002.jpg (194424 bytes)altompcBerg80-3-M003.jpg (258306 bytes)Vintage Berg Larsen 80-3-M Alto: 80 = tip size, 3 = baffle: deepest tone, M=medium facing length. Looks like a 70s era Scoopbill with dropoff chamber & made of Stainless Steel. This one arrived after being altered to sub-par standards. You can barely see the curved machine marks on the table that go left to right. Just back from Bob Carpenter who repaired it back to a much improved playability...tip @ 0.085". It has a stick-on guard (blue) to prevent ligature wear. no ligature, sorry. Nice Berg sound--Deep, Loud w/o shrillness. Why buy new models at 170?

$$$ See new website Item: OS00.00.11301.1-0-BC50

 

modern BERG LARSEN 105-2-SMS metal Alto:  

BergLarsen_alto_105-2-sms_001.JPG (457481 bytes)BergLarsen_alto_105-2-sms_002.JPG (610173 bytes)

Stainless, #105 (!!!), but wait, it arrived with tip at 0.091" original ligature and cap. 

SOLD

Item: WWS3S7.34.441.6-011

 

vintage Berg Larsen 90-1-M(offset) straightbill stainless alto:  

Berg90-1-Mfatbodyalto_001.jpg (284664 bytes)Berg90-1-Mfatbodyalto_002.jpg (226844 bytes)Berg90-1-Mfatbodyalto_003.jpg (378884 bytes)This is original at 90-0-M (with the M off to the right, which is older style than the centered facing length markings). The Tip measures a common 0.087" for a Berg 90; plays loud, has a fat tone with a strong treble presence(loud/bright). It comes with the original ligature and cap.  

***A very nice player! (and I'm not a huge fan of metal, Berg altos.)

$$$ See new website  Item: WWS00.00.8151.3-0-1

 

BRILHART: 

 

Ebolin3alto_001.jpg (239747 bytes)Ebolin3alto_002.jpg (195232 bytes)Ebolin3alto_003.jpg (196468 bytes)vintage Brilhart Ebolin 3 alto: ...probably 40s-50s, made of plastic, with serial #123507. It arrived in original condition with a small blemish at the tip so I enhanced the seal from the original 0.066". I just enhanced the tip to 0.068". SUPERB PLAYER--A warm vintage, clean tone. Think: "Glenn Miller".

SOLD  Item:WWS0.10.5221.4-C5

 

vintage Brilhart Ebolin 3* alto "RAC 80-20" (#2 listed): ...1950s, made of plastic, with serial #63852. Bob Carpenter Reface tip to 0.080"

SOLD  Item:WWSBob's Collection

 

Vintage Brilhart Level-Air 5*

altompcLevelAir5-001.jpg (291157 bytes)This is a very nice, free blowing mpc -- tooth pad repaired in the past, and has two newer tooth marks on the top that I could easily cover up with a clear pad (remind me). It blows a big sound with heavy mid tones for a metal, cliff baffle. later vintage series with up and down machining on the table. This is the more desirable 5*...hard to find, original tip measures 0.081". It blows really nice and free. comes with original cap and ligature! (please ask me to get these top-view pics uploaded)

$$$ See new websiteItem: WWS65.42.11251.1-BC28.R1.1W0.6241.6

Sound File: Brilhart Level Air 5* vs The Woodwind vs Dukoff D7

 

Vintage Brilhart Level-Air 6*

BrilLA6-_001.jpg (185953 bytes)BrilLA6-_002.jpg (363002 bytes)BrilLA6-_003.jpg (377240 bytes)This is a very nice, free blowing mpc recently back from Bob Carpenter who repaired the tooth pad only--typical on these. It blow a big sound with heavy mid tones for a metal, cliff baffle. later vintage series with up and down machining on the table. This is the more desirable 6*...super hard to find, original tip measures 0.085"! comes with original cap and ligature! I will put a clear plastic bite guard on it too.

SOLD Item: WWS63.80.6201.3-BC30

Sound File: Selmer "Jazz" E, Dukoff D6 (Miami), Otto Link NY Tone Master <6, Brilhart Level Air 6*

Sound File: Brilhart Level Air 5* vs The Woodwind vs Dukoff D7

 

Brilhart Tonalin 4* alto: 

Brilhart_Tonalin4Star_Alto_001.JPG (446177 bytes)Brilhart_Tonalin4Star_Alto_002.JPG (468353 bytes)

1968-69 no serial #. I happen to know a little history from this mouthpiece's journey to be able to date it. Although no serial #, I happen to know what horn the fellow was playing. If I link these two eras, they both line up with about 1968-9. I will have Bob C fill in the tooth pad, and inspect the tip. The tip arrived in nice condition but the table has some bumps from in the case. We'll make this play great! 

Improved Tip at: 0.073".  

SOUND: blows easy! Plays a little brighter/cutting than I expected from a Tonalin.

$$$ See new website Item: WWS00.0S0.10171.6-C.B30

Brilhart Tonalin 2 alto: 

Brilhart-Tonlin-2_Alto_072_001.JPG (677440 bytes)Brilhart-Tonlin-2_Alto_072_002.JPG (562956 bytes)Brilhart-Tonlin-2_Alto_072_003.JPG (267498 bytes)

no serial #. I had Bob C fill in the tooth pad, It had a larger tip than expected on arrival, It received some altering here enough to call it a "Refaced" example. WWS Reface: 0.072". SOUND: reserved-vintage tone. clearer tones up high allow treble to return, minor-subdued tone overall. 

$$$ See new website  Item: WWS00.00.008301.5-0C40B40

Sound File (similar mouthpiece): Otto Link 4**** Master(0.060"), Meyer 5(0.069"), Brilhart Tonalin 3 (0.066")

 

Tonalin3alto1.jpg (136911 bytes)Tonalin3alto2.jpg (154650 bytes)Brilhart Tonalin 3 alto: #180276 with script in great condition. This one plays really nice with decent focus as you would expect from a Tonalin.  Not too loud (small tip) and it helps cut out the high-tones. A good smooth Stan Getz, Louis Jordan type sound--high treble tones get cut out. Tip size at 0.066", tooth pad sticker installed. Comes with ligature. I just noticed a hairline crack at the shank; I am deciding whether to send it to Bob for banding ...perhaps with a customer order, we would be willing to Reface this one to a larger tip. (5*?)  

SOLD *a nice blower! Item: WOS1.00.00.111.0-0

Sound File (actual mpc): Otto Link 4**** Master(0.060"), Meyer 5(0.069"), Brilhart Tonalin 3 (0.066")

ALTOs Sound File on THIS mouthpiece: Conn Chu, JK New King, Dolnet II  soundfileALTO-chu-newking-dolnet.jpg (90062 bytes)

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

BROADUS: 

 

Steve Broadus N.Y. "Perfected" hard rubber alto: 

BroadaltoS3_001.jpg (220314 bytes)BroadaltoS3_002.jpg (226305 bytes)Real smooth & Rich, large chamber S3 model. Script is good. Original Tip measured 0.063" but it received a WWS REFACE to 0.072", it plays really nice and with a bit more focus than the sound file with the 0.055. It reminds me of a S80-C* crossed with a Meyer 5--BUT with more treble power than both. No ligature, but you can ask--one the size of a selmer S80 fits. These are hard to find mpcs and we love them. (this one actually has a 2-3mm longer body{center of mpc} than the 0.072" listed below.) PHOTOS were before the refacing work.

$$$ See new website   Item#: WWS50.00.12261.2-0-3

Sound File: Geo.M.Bundy-3(0.066"), Steve Broadus Perfected (0.072"), Brancher Ebony (0.098")

SOUND FILE:  Meyer 5 (0.069"), Bari (0.072"), Broadus NY perfected(0.055")

Just updated:

Steve Broadus N.Y. "Perfected" hard rubber alto: 

Broadus_Perfected_alto_070_001.JPG (664301 bytes)Broadus_Perfected_alto_070_002.JPG (626049 bytes)Broadus_Perfected_alto_070_003.JPG (334436 bytes)

Real smooth & Rich, large chamber S3 model. Script isWWS REFACE 0.074" . I will find a ligature to pair with it. These are hard to find mpcs and we love them. (this one actually has a 2-3mm shorter body{center of mpc} than the 0.070" listed above. interesting) SOUND: clean and focused.

$$$ See new website Item: WWS00-00C45-03

Sound File: Geo.M.Bundy-3(0.066"), Steve Broadus Perfected (0.072"), Brancher Ebony (0.098")

Sound File (smaller tip):  Selmer "TableC*" 0.065, Bilger-Morgan 1-C 0.057, Buescher 0.055, Broadus 0.058, Woodwind "N8" 0.062 AltoMPCs-x5-pic_selmer_morgan_buescher_Broadus_Woodwind.jpg (136608 bytes)

 

 

BUESCHER:

 

bueschermpc001.jpg (99620 bytes)bueschermpc002.jpg (106927 bytes)Vintage, white, Buescher ALTO (#1): 

white plastic mpc from the 1940s/50s. legit for traditional jazz, big band sound.  Original Tip @ 0.063", minor tooth marks, it has the small chamber with walls like Ebolins. it plays great with easy response.

SOLD/ON TRIAL - NT Item: WWS25.00.8251.1-02

Vintage, white, Buescher ALTO (#2): 

white plastic mpc from the 1940s/50s. legit for traditional jazz, big band sound.  Original Tip @ 0.062", minor tooth marks I can help hide, Also remind me to seal the tip. it has the small chamber with walls like Ebolins. 

SOLD  Item:WWSL19.00.5241.4-25

 

BuescherTT.055-001.jpg (200940 bytes)BuescherTT.055-002.jpg (180077 bytes) Buescher (pickle), hard rubber alto: vintage early 1920s from a TrueTone, markings of "2", tip looks original, tip @ 0.055" and it plays stuffy, like the traditional sound it had with the Buescher True Tones. Stiff reeds needed. sorry, no ligature currently.

$$$ See new websiteWWS24.00.7101.3-05

Sound File (actual mpc!):  Selmer "TableC*" 0.065, Bilger-Morgan 1-C 0.057, Buescher 0.055, Broadus 0.058, Woodwind "N8" 0.062 AltoMPCs-x5-pic_selmer_morgan_buescher_Broadus_Woodwind.jpg (136608 bytes)

 

 Buescher (pickle) "Emblem", alto: 

Buescher-Pickle-emblem_Alto_066_001.JPG (478562 bytes)Buescher-Pickle-emblem_Alto_066_002.JPG (812539 bytes)Buescher-Pickle-emblem_Alto_066_003.JPG (420594 bytes)

Original Markings on the table were "63/30M 5/27" WWS REFACE 0.066+" (to be finished). Large Chamber.

$$$ See new website Item: WWS00-00C30-01

 

 

LateBuescherTTalto068_001.jpg (278024 bytes)LateBuescherTTalto068_002.jpg (229278 bytes) Late Vintage Buescher TrueTone Alto: Vintage hard rubber from 1940s/50s...it has a large window for the reed! cool!  Also the large large chamber and I enhanced the tip up to 0.068". It plays really easy.  I would say it sounds typical of a stuffy, vintage tone.  no ligature, sorry.

$$$ See new website Item: WWS00.2121.4-0GMZ3

 

Vintage Buescher (Rascher) Alto: (pictured on the right)

BuescherAltompc003.jpg (248518 bytes)BuescherAltompc002.jpg (356296 bytes)BuescherAltompc001.jpg (839682 bytes)Vintage hard rubber from 1920s.  No script, has faded into that vintage hard rubber. I took side-by-side photos to show the longer length of this one--Neat!  It had the original tip size @ about 0.045"...now, I refaced it to 0.058" for a customer.  It plays really nice with a Lavoz Medium, and great with a 2.5 reed, due to smaller tip, I see it being best with a #3 or higher.  It has a very large Chamber and that traditional 1920s stuffy tone.  no ligature, but i might be able to find one.  

$$$ See new website Item#:WWS0.00.9181.2-0C34

 

Vintage Buescher pickle "TrueTone USA" Tru-Lay 65/812/M Alto:

Buescher-TrutoneUSA-TruLay-65_812_Alto_.052_001.JPG (693824 bytes)Buescher-TrutoneUSA-TruLay-65_812_Alto_.052_002.JPG (745211 bytes)Buescher-TrutoneUSA-TruLay-65_812_Alto_.052_003.JPG (510501 bytes)

Vintage hard rubber from 1920s.  It has the original tip size @ about 0.054". It will play nicer with a Lavoz Medium, and poorly with a 2.5 reed so stick to #3 or greater.  It has a very large Chamber and that traditional 1920s stuffy tone, narrow beak.  no ligature, but ask me. Refacing possible( +$). (remind me to finesse the reface)

$$$ See new website Item:WWSL19.00.5241.4-31

 

Very Vintage Buescher pickle [Emblem Font] Alto:

Vintage hard rubber from 1920s(perhaps earlier).  It has been refaced (elsewhere?) to tip size @ about 0.064". I THINK THIS COULD BE A SWEET SWEET PLAYER!  It has a very large Chamber and that traditional 1920s stuffy tone but add in the high tones from the reface.  no ligature, but ask me. (remind me to enhance the tip seal)

$$$ See new website Item:WWSL19.00.5241.4-30

 

AltoAristo002.jpg (189220 bytes)AltoAristo003after.jpg (202959 bytes)altoaristo004compare.jpg (362352 bytes)Buescher pickle "aristocrat", hard rubber alto: tip @ 0.082" and it plays way better and with more treble than the original facings. comes with brass ligature. When I fixed the facing work, I tried to get rid of all baffle and enhance the true Buescher tone and round chamber. It plays really nice now!

$$$ See new website Item:WWS00.00.5171.2-C

 

 BUFFET

 

None currently in stock 

 

CONN:

 

panamA.jpg (139014 bytes)Vintage rubber Conn Pan-American Alto: Vintage hard rubber from 1930s. It has a large Chamber and I just had Bob Carpenter open it up to 0.069". It plays really easy.  I would say it sounds typical of a stuffy, vintage tone but after Bob's work, it can cut through in the high register--still not as loud of a mpc as others.  no ligature, sorry.

$$$ See new websiteItem: WWS00.2121.4-0GOMZ

 

Vintage, Conn Standard "Steelay"alto: 

Vintage hard rubber from 1930s. COOL! a "U.S. Navy" engraved side wall! It has a large Chamber and Original Tip @ 0.054" -- Let's reface that!  I would say it sounds typical of a stuffy, vintage tone but after

$$$ See new website

 Item:WWSL19.00.5241.4-28

 

Vintage rubber Conn Eagle Alto: Vintage hard rubber from 1920/30s.  Originally it was paired with a ConneagleWOS1.jpg (261753 bytes)ConneagleWOS2.jpg (182118 bytes) Wonder .  It has a large Chamber and I just had Bob Carpenter open it up to 0.080". It plays really easy.  I would say it sounds typical of a stuffy, vintage tone but after Bob's work, it can cut through in the high register--still not as loud of a mpc as others.  no ligature.

$$$ See new websiteItem: WSS

SOUND FILE (Actual Mouthpiece!): "Conn Early Lineage": Wonder vs Wonder II (Chu) vs 6M Naked Lady

 

ConnEagleRACalto1.jpg (83864 bytes)ConnEagleRACalto2.jpg (106095 bytes)Conn "Eagle" Alto (RAC): Recently back from a refacing by Bob Carpenter to a 0.081" with a 19mm facing. Bob marked his etching on the table too ("RAC")! A great hard rubber mouthpiece that will give you a warm full sound--It would have been originally paired with a Conn Chu. A large chamber on this one. Bob and I helped enhance the gold 'eagle' script.

     NOTE: the original facing was "0.078" as it was inscribed. But a nick happened in the tip and BOB had to repair it. It now measures 0.081"

$$$ See new website Item: WWS0.00.9201.1-0BC30

SOUND FILE using a Conn Eagle mpc: Wonder vs Wonder II (Chu) vs 6M Naked Lady

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

COUF:

 

None currently in stock

 

 

DUKOFF:

 

Vintage Dukoff D5 {D6} Miami, FL Alto: DukoffD5altoFL006.jpg (204593 bytes)DukoffD5altoFL0051b.jpg (78714 bytes)Metal, rock & roll Loud mouthpieces.  David Sanborn power, it blows really easy and carries that bright sound naturally. We sent this to Bob Carpenter for reclamation as it needed Bob to be saved.  It was beat up as is typical for Dukoff silverite material. Tips and rails look great now, whole mouthpiece lightly polished, and Bob Carpenter refaced it to be a now D6, TIP = 0.077", baffle is that large step/slope baffle. bite plate looks good too (usually worn through. It plays really nice with a Fat Dukoff sound, not as shrill as D7, new tooth guard installed. comes with rovner ligature and plastic cap.   (considering that D7 and D8 are going for 450-650, this shouldn't last too long.) ***I just saw an ugly one go on ebay for more than this!

$SOLD

 Item: WWS1.0E4.99.7191.1-B75

Sound File: Selmer "Jazz" E, Dukoff D6 (Miami), Otto Link NY Tone Master <6, Brilhart Level Air 6*

 

DukoffD7altoFL-1.jpg (316545 bytes)DukoffD7altoFL-2.jpg (95226 bytes) Vintage Dukoff D7 Miami, FL Alto:

Metal, rock & roll Loud mouthpieces.  THE David Sanborn mpc for power, it blows really easy and carries that bright sound naturally.  Tip at 0.080"

SOLD  Item: WWS

Sound File: Brilhart Level Air 5* vs The Woodwind vs Dukoff D7

 

Dukoff D8 "Miami" silverite Alto:  (quick listing)  

Dukoff-D8_alto_miami_001.JPG (454901 bytes)Dukoff-D8_alto_miami_002.JPG (412547 bytes)Dukoff-D8_alto_miami_003.JPG (313589 bytes)Dukoff-D8_alto_miami_004.JPG (557849 bytes)Dukoff-D8_alto_miami_005.JPG (571277 bytes)Dukoff-D8_alto_miami_006.JPG (699565 bytes)

a great mouthpiece that arrived with an original tip at 0.080" but needed refacing help. Just back from Bob Carpenter, his refaced TIP = 0.086". 

SOLD

BOB: "That's a really great playing mouthpiece!"

CHADD: "The best Dukoff Miami that I've ever played"

 Item: WWSL4W0.1271.6-004B50

 

Dukoff D7 "Miami, FL" alto:

DukoffD7miamiAlto077_001.jpg (411349 bytes)DukoffD7miamiAlto077_002.jpg (316911 bytes)DukoffD7miamiAlto077_003.jpg (281164 bytes)DukoffD7miamiAlto077_004.jpg (321523 bytes)

DukoffD7miamiAlto077_005.jpg (306273 bytes)DukoffD7miamiAlto077_006.jpg (281005 bytes)DukoffD7miamiAlto077_007.jpg (407515 bytes)DukoffD7miamiAlto077_008.jpg (350198 bytes)

  David Sanborn lovers need to contact me! Comes with original Box, Ligature and cap! It arrived needing minor work on the table and tip seal; I did that and play-tested it. Now a near-original tip @ 0.077". It is a free-blowing mouthpiece with booming altissimo.

$$$ See new website - inspected and perfected!

Item#: WWS3.4E0.831.5-C20

 

GEO M. BUNDY:

 

g_m_bundy_alto.jpg (412642 bytes)  Geo M. Bundy #3 alto (1 of 3):  Refaced by Bob Carpenter to 0.082".  These are surprisingly good old eburnated hard rubber pieces, similar to 40's Otto Links.  Lots less money 'though.   Original tips play best with a "#3 or so" reed and have a good vintage tone.  

$$$ See new websiteItem: WSS

Bundy3-00.jpg (178548 bytes)Bundy3-01.jpg (205489 bytes) --Geo M. Bundy #3 alto (2 of 3): original tip at 0.072", looks good just that vintage-green rubber look. very minor nicks in the tip that are NOT affecting the seal. These are similar to 40's otto link in tone and much cheaper! currently no ligature, sorry. Chamber with size walls.

$$$ See new website Item: WWS0.14.99.6111.3-0

Sound File: Geo.M.Bundy-3(0.066"), Steve Broadus Perfected (0.072"), Brancher Ebony (0.098")

--Geo M. Bundy #3 alto (3 of 3):

GeoBundy-3_Alto_072_001.JPG (845970 bytes)GeoBundy-3_Alto_072_002.JPG (908673 bytes)GeoBundy-3_Alto_072_003.JPG (213146 bytes)

 original tip at 0.064", looks good just that vintage-green rubber look. very minor nick way up the tooth pad--not near the playing areas. These are similar to 40's otto link in tone and much cheaper! Chamber with size walls. Comes with brass ligature and brass cap.

SOLD Item: WWS30.00.6201.3-0

 

Geo M. Bundy #3 alto, Round chamber:

GeoBundyroundchamber3_78_001.jpg (176979 bytes)GeoBundyroundchamber3_78_002.jpg (159565 bytes)GeoBundyroundchamber2_75_ 003.jpg (99935 bytes)(touched up after photos) I refaced tip at 0.079" to copy my "Selmer NY" mouthpiece's curve ($299 listed below)!  These are similar to 40's otto link in tone and much cheaper! Slant Bundy signature, no size walls. round, open chamber! These early ones with the open chamber are more sought after. Ask me about a ligature.

$$$ See new website Item: WWS30.00.911.3-0-1C75

 

Geo M. Bundy #2 alto, round chamber:

GeoBundyroundchamber2_75_ 001.jpg (156893 bytes)GeoBundyroundchamber2_75_ 002.jpg (182846 bytes)GeoBundyroundchamber2_75_ 003.jpg (99935 bytes)I refaced tip at 0.075", to copy my "Selmer NY" mouthpiece's curve ($299 listed below)! but slightly different. These are similar to 40's otto link in tone and much cheaper! Slant Bundy signature, no size walls. round, open chamber! very free blowing!!! These early ones with the open chamber are more sought after.  Ask me about a ligature.

199.00...SOLD

Item: WWS30.00.911.3-0-2C60

 

Geo M. Bundy #3 alto, Round chamber:

 

Refaced tip at 0.072" work perfeced by BP, a 20mm facing length (plays with mild resistance.) This was traded to me from a customer who originally paid over $550! These are so close to a "Selmer NY" that they used to be sleeper mouthpieces. These are similar to 40's otto link in tone and much cheaper! Slant Bundy signature, no size walls. round, open chamber! These early ones with the open chamber are more sought after. Ask me about a ligature.

$SOLD Item: WWS

 

GOLDBECK:

 

goldbeck2superb1.jpg (168086 bytes)goldbeck2superb2.jpg (213202 bytes) Goldbeck #2 "Superb" model Metal Alto:  These are 1920s vintage mouthpieces with a dark tubby tone, from a large chamber. They have fluted sidewalls on the exterior that had special ligatures (very hard to find)--the got lost, bummer.  Their design and sound is very similar to the early Otto Link Master models. The composite is interesting, something between silver and brass. Tip opened to a size of 0.065". No ligature, notice the lack of tooth pad design, we'll include a cushion if you'd like to play. Most buyers like these to strictly look at though.  $$$ See new website Item: WSS

 

goldbeck3makers1.jpg (153993 bytes)goldbeck3makers2.jpg (197539 bytes) Goldbeck #3 "Makers" model Metal Alto:  These are 1920s vintage mouthpieces with a dark tubby tone, from a large chamber. They have fluted sidewalls on the exterior that had special ligatures (very hard to find)--the got lost, bummer.  Their design and sound is very similar to the early Otto Link Master models. The composite is interesting, something between silver and brass. Original Tip size at 0.051". No ligature, notice the lack of tooth pad design, we'll include a cushion if you'd like to play. Most buyers like these to strictly look at though.  $$$ See new website Item: WSS

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

(M.C.) GREGORY:

 

MC Gregory ["Master" by Gregory Hollywood], 4A 16M, alto: 

MCGregoryMASTERalto_4A16M_008.JPG (607230 bytes)MCGregoryMASTERalto_4A16M_003.JPG (662823 bytes)MCGregoryMASTERalto_4A16M_002.JPG (738662 bytes)MCGregoryMASTERalto_4A16M_004.JPG (743145 bytes)MCGregoryMASTERalto_4A16M_005.JPG (737146 bytes)MCGregoryMASTERalto_4A16M_006.JPG (441218 bytes)MCGregoryMASTERalto_4A16M_007.JPG (289069 bytes)

MCGregoryMASTERalto_4A16M_001.JPG (645066 bytes)Another great mouthpiece. It reminds me a lot of the Model A design--shallow beak. the Script is in excellent condition too! But these have a medium, round chamber--no side walls. 

Original tip measures 0.064". I recommend our WWS professional work on the tip seal to help this mouthpiece respond best. 

$$$ See new website Item:WWSL1.3S2.14.5241.6-02C10

 

 

KING:

 

KingAmpc.jpg (135056 bytes) King A Alto #2: An less expensive option, Recently back from a refacing by Bob Carpenter to a .080". A great plastic composite mouthpiece that will give you semi-vintage tone that plays easy like a modern mouthpiece. Medium, walled chamber on this one. no ligature.

$$$ See new website

Item: WSS00.00.811.1-B35

 

kingaltomouthpiece.jpg (377419 bytes) King A Alto #2: Recently back from a refacing by Bob Carpenter to a .078". A great hard rubber mouthpiece that will give you a warm full sound. A large chamber on this one.

$$$ See new website Item: WSS

 

LAKEY:

 

Claude Lakey JAZZ 6*3 Alto:  

Lakey,alto,6s3_001.JPG (318467 bytes)Lakey,alto,6s3_002.JPG (325121 bytes)Lakey,alto,6s3_003.JPG (238769 bytes)

Rubber, arrived with original tip at 0.088" no ligature, on arrival. Ask me for extras if I can help with the ligature. mild use. Ask me to inspect/perfect the tip seal.

SOLD

Item: WWS3S7.34.441.6-005

Claude Lakey JAZZ 7*3 Alto:  

Lakey_alto-7s3_001.JPG (287201 bytes)Lakey_alto-7s3_002.JPG (228987 bytes)Lakey_alto-7s3_003.JPG (352045 bytes)

Rubber, arrived with original tip at 0.089" no ligature, on arrival. Ask me for extras if I can help with the ligature. used. Ask me to inspect/perfect the tip seal.

SOLD

Item: WWS3S7.34.441.6-019

Claude Lakey JAZZ 8*3 Alto:  

Lakey-Alto-8s3_001.JPG (280977 bytes)Lakey-Alto-8s3_002.JPG (298865 bytes)

Rubber, arrived with original tip at 0.091" no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. Ask me to inspect/perfect the tip seal.

SOLD

Item: WWS3S7.34.441.6-004

 

 

MARTIN:

 

Martin Plastic Alto, 1950s: I'm going to call these the [Committee III] model, because they came with that model of sax. Not expensive, really nice sound.  I just refaced it to a 0.076".  small tooth bite grooves remain. very nice blower! and it's ready to go for:

$SOLD Item: WWS0.00.2221.3-1-C45

 

martin_a_mpce.jpg (126953 bytes)  Martin Plastic Alto, 1959: I'm going to call these the [Committee III] model, because they came with that model of sax. Not expensive, really nice sound.  Bob Carpenter has just refaced it to a 0.078" and it's ready to go for  

$$$ See new website Item: WSS

 

dickstabilemartin.jpg (72427 bytes)Dick Stabile, by Martin Alto mpc: Very warm sounding hard rubber mouthpiece a for darker, large chamber sound.  Bob Carpenter customized  the tip to a .081" (usually a 85.00 job) and it sounds and plays beautifully  

$$$ See new website Item: WSS

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

MEYER:

 

meyer5m.jpg (90576 bytes)Meyer 5m Alto: 

SOLD Item: WSS

Sound File (feat. this mpc): A.Lelandais, Woodwind Co., Meyer5

Sound File (actual mpc): Otto Link 4**** Master(0.060"), Meyer 5(0.069"), Brilhart Tonalin 3 (0.066")

SOUND FILE (actual mpc!):  Meyer 5 (0.069"), Bari (0.072"), Broadus NY perfected(0.055")

 

MORGAN:

 

Bilger-Morgan (M-2)

Morgan_M-2_alto_7186_057_001.JPG (527525 bytes)Morgan_M-2_alto_7186_057_002.JPG (539181 bytes)Morgan_M-2_alto_7186_057_003.JPG (233352 bytes)

Ser. #7186, original tip @ 0.057", i did repair the tip rail just slightly. I think it stayed right at 0.057"...I wanted it to stay the smallest for a classical player. Medium round chamber. Brass ligature and cap.

$$$ See new website Item#:WWS50.00.8151.3-0

Sound File (actual mpc!):  AltoMPCs-x5-pic_selmer_morgan_buescher_Broadus_Woodwind.jpg (136608 bytes)

Selmer "TableC*" 0.065, Bilger-Morgan 1-C 0.057, Buescher 0.055, Broadus 0.058, Woodwind "N8" 0.062  

Sound File (on this mpc): OttoLink MasterLink 0.059", Morgan M-2 0.057", Conn Steelay 0.072"

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

OTHER/Misc:

Amerite Tru-Art, alto:

Amerite-TruArt-Alto-076_001.JPG (723639 bytes)Amerite-TruArt-Alto-076_002.JPG (684268 bytes)Amerite-TruArt-Alto-076_003.JPG (351085 bytes)

huge large chamber. I refaced it to a 0.076". (to be finished). A great vintage tone from the large chamber. Very similar to Woodwind Co. designs. (compare at $200-250+).

$$$ See new website

Item: WWS00-00C30-01

 

 

Babbitt5plasticAlto001.jpg (283377 bytes)Babbitt5plasticAlto002.jpg (187839 bytes) Babbitt elkhart 5, alto: easy blower. Good for young player. made of plastic, I refaced it to a 0.074". no lig with it currently. I should be able to find one.

$$$ See new websiteItem#: WWS10.00.12261.2-0-5CB30   

 

OSplasticDoubleBand_001.jpg (542188 bytes)Plastic -DoubleBand- alto: easy blower. Good for young player. made of plastic, I refaced it to a 0.071". no lig with it currently. I should be able to find one. large square chamber, straight side walls. Plays with clear, cutting focus.

$$$ See new website Item#: WWS00.00.9111.3-CB10  

 

Naujoks-Mclaughlin- Sil-Va-Lea, alto:

Naujoks-McLaughlin-Silvalea_Alto_80_001.JPG (699570 bytes)Naujoks-McLaughlin-Silvalea_Alto_80_002.JPG (559959 bytes)Naujoks-McLaughlin-Silvalea_Alto_80_003.JPG (389992 bytes)

large chamber. I was refacing it to about 0.080". (to be finished, photos are 'during' reface.) I was coping the curve of my favorite Woodwind Co alto mpc. The metal table is extremely durable and difficult to reface. On the bright side, it will hold it's curve once it's setup.

$$$ See new website

Item: WWS00-00C75-03

C.T.U. Special #B5, alto:

CTU-Special-B5_alto_059_001.JPG (381407 bytes)CTU-Special-B5_alto_059_002.JPG (607077 bytes)CTU-Special-B5_alto_059_003.JPG (672087 bytes)CTU-Special-B5_alto_059_004.JPG (450311 bytes)

 large chamber.  Looks like "woodwind co." design.... compare these when refaced at $250+.  Tip .059". (needs reface) Let's talk!

$$$ See new website

 

No Name, Rubber, alto:

NoName-Vintage1920_Rubber_082_001.JPG (826249 bytes)NoName-Vintage1920_Rubber_082_002.JPG (915604 bytes)NoName-Vintage1920_Rubber_082_003.JPG (448542 bytes)

Vintage 1920/30s, Large Chamber,  Tip .082" Refaced by Bob C.

$$$ See new website Item: WWS00-00B30-01

 

Vintage, white, "BABBITT Elkhart, Ind." alto: 

(looks near identical to Buescher 400 style!) white plastic mpc from the 1940s/50s. legit for traditional jazz, big band sound.  Original Tip @ 0.063", minor tooth marks I can help hide, Also remind me to seal the tip. it has the small chamber with walls like Ebolins BUT slightly tighter opening than the B400 style--more focus.

SOLD Item:WWSL19.00.5241.4-26

 

Cannonball #5 alto:  

Cannonball-alto,rubber_001.JPG (578888 bytes)Cannonball-alto,rubber_002.JPG (410246 bytes)Cannonball-alto,rubber_003.JPG (410024 bytes)Made of good rubber, arrived with original tip at 0.079" modified baffle, no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. medium chamber. Ask me to inspect/perfect the tip seal. I expect this to be a nice, jazz player. 

$$$ See new website

Item: WWS3S7.34.441.6-007

 

GRAB BAG of mouthpieces! $30-$190

Row 1 (altos):GrabBag_x13_001.jpg (548612 bytes)

1. $SOLD Pomarico-Italy #2:  tip @ 0.060”, Glass, these sell for $120 new. Medium Chamber with side walls. Clear tooth pad installed. (large shank for neck cork, slight nick on inner wall but does not affect seal) Item#: WWS0.25.00.981.3-1

2.  now $179.00 A.Lelandais Chantecler IV: I refaced to 0.081”,(photos are Before reface) Hard Rubber, in non-original facing, I had to drastically help this mouthpiece... SCROLL DOWN for solo description. Item#: WWS0.15.00.9281.2-2-C90

3. $50 Buffet Crampon Paris 4: tip @ 0.062” Hard rubber, small round chamber. Good for subtle jazz or concert band. Good with hard reed. Item#:WWS0.15.00.9281.2-3

4. SOLD $40 modern Chinese 5:  

5. SOLD $140 ARB Brilhart Hard Rubber 4*: 

6. SOLD $55 modern Otto Link Tone Edge 6*: -- Sound File --

7. $149 vintage Vandoren 4: tip@ 0.065”, hard rubber, small round chamber. Clear, strong focus in the tone. Legit for Concert band or focused jazz. Very nice player. One just sold on eBay for $160! Item#:WWS0.15.00.9281.2-7

Row 2 (altos/tenor #12 & 13):GrabBag_x13_002.jpg (562581 bytes)

8. $49 vintage no name: tip @ 0.055”(Reface 0.070) , hard rubber, medium-large chamber. Similar to a conn eagle. Item#:WWS0.15.00.9281.2-8C4510-15

9. $40 Riffault Steel Ebonite R4: tip@ 0.062”, hard rubber, made in france, small round chamber. Mellow darker tone.  Item#:WWS0.15.00.9281.2-9

10. $105 SML Paris R5: tip @ 0.071”, medium-small round chamber. Clear focused tone with a hint of nasal sound on 2.5 reed. Item#:WWS0.15.00.9281.2-10

11. $60 A.Lelandais: tip @ 0.060”, the script is barely visible, hard rubber, large round chamber, nicks in metal and rubber near shank—exterior only. Mellow, nasal tone. Item#:WWS0.15.00.9281.2-11

12. $SOLD (TENOR) Kleartone Professional 2:

13. $SOLD (TENOR) Claude Lakey Symphony Model 5:

 

(#8 above)  vintage no name:   

NoName_Alto_082_001.JPG (536042 bytes)NoName_Alto_082_002.JPG (581730 bytes)NoName_Alto_082_003.JPG (332189 bytes)

original tip was @ 0.055” (now a WWS Reface 0.082") , hard rubber, large chamber. Similar to a Conn eagle. ...now 59.00$$$ See new website

(#1 above) Pomarico #2 Italy GLASS alto:   

Pomaricoalto_001.jpg (42822 bytes)tip at 0.060", made of glass, with a metal shank band, these sell for $120.00+ New. Medium chamber with side walls. Clear tooth pad to be installed (large shank for neck corks).

SOLD Item: WWS30.00.911.3-0-3

 

 

RACwhite82-17_001.jpg (127515 bytes)RACwhite82-17_002.jpg (147267 bytes)white composite "RAC" Alto:  This is a composite plastic mouthpiece--white with black bite plate cushion installed.  This received metal banding repair and refacing from Bob Carpenter and now has a tip size of 0.082" with a 17mm facing. It has a medium chamber with shallow side walls like a Martin, ebolin, or tonalin. sound-wise: it has a mild tubby-ness to it, smooth like classic jazz...Until you go up high. then the 82 tip opens up to a bit brighter, cutting ability. It responses best with a +2.75 size reed. No ligature.  

$$$ See new websiteItem: WSS00.00.30BC

 

nonameFrance70-001.jpg (180208 bytes)nonameFrance70-002.jpg (180663 bytes)Vintage no name "france": 

Reminds me of a Conn Eagle design, vintage hard rubber from 1920/30s, with metal shank ring. "france" on the side. It has a large Chamber and I just opened it up to 0.069-70". It plays nice now with good response. no ligature.

$$$ See new website

WWS24.00.7101.3-C45-03VG00.4

 

FrenchFredalto_001.jpg (486870 bytes)FrenchFredalto_002.jpg (467201 bytes)The French Fred, hard rubber alto: easy blower. Good for young player. made of plastic, I touched up the refacing to a 0.078". no lig with it currently. I should be able to find one. Medium chamber, much like a Meyer 5. Plays with clear, cutting focus. 

FREE BLOWING, HUGE SOUND!

$$$ See new website Item#: WWS00.00.9111.3-CB17  

 

WWS Custom Hard Rubber, modern make: CustomHardRubber_001.jpg (161183 bytes)CustomHardRubber_002.jpg (265728 bytes)CustomHardRubber_003.JPG (247151 bytes)Each WWS Custom mouthpiece is hand-finished AND Play-Tested by Me! A great hard rubber mouthpiece, and they play nice with no resistance. The design is a small chamber with a very late mild roll-off baffle. Comes with a nice goldplated, metal ligature & cap. 

$$$ See new websiteI just59

  opened it up to 0.076" Item: WWS40.00.9111.3-CB10 

$$$ See new website I just opened it up to 0.072" Item: WWS40.00.9111.3-CB15 

 

VandorenBlank77_001.jpg (308913 bytes)VandorenBlank77_002.jpg (268629 bytes)NoName (vandoren look) alto:  made of a unique hard rubber, it has a shallow beak and high chamber build, low baffle and slight rollover at the tip from my reface. It is now refaced to 0.077". The chamber is almost a standard "medium" except it has some rounded sidewalls that don't protrude too far. 

79.00...now 69.00 Item: WWS00.2121.4-C35G

 

MISC [No Name] 5, hard rubber alto:  

Noname_5_alto_069_001.JPG (578958 bytes)Noname_5_alto_069_002.JPG (616539 bytes)Noname_5_alto_069_003.JPG (238433 bytes)

nice hard rubber design that looks familiar...(ask me if I have Identified it yet). I had to finesse the factory table and facing, this one will play great. I just enhanced it to ~ 0.069". It plays _____[let me check after reface-fine-tuning]___. It has a medium (like a Meyer), round chamber with TIGHTER- rounded side walls. Upon a quick play test, it is more Reserved in tone, mild resistance in blowing. I would certainly look at the tip for any finesse repairs to the curve. I think this could be a GREAT player for a budget-minded person. no lig sorry.

SOLD Item:WWS0.00.130.1.5-C25

 

Riffault68_001.jpg (176087 bytes)Riffault68_002.jpg (228325 bytes)Vintage Riffault, R4 Alto: a great mouthpiece, Steelite Ebonite name = good, made in "France". It has a medium-small chamber and reminds me of a Selmer C* for response and focus, and I just opened it up to 0.068". It plays nice now with good response. no ligature. (cheaper original 0.062" in the Grab Bag for $65; different body design.)

SOLD --SUPER SUPER SUPER Easy player after my refac. 

Item: WWS24.00.7101.3-C30-06

 

bari alto 002.jpg (108561 bytes)Bari brand alto:  This is a good quality hard rubber mouthpiece, old enough to have started greening,  by the Bari company.  It's tip is a 0.072" and it's original and in great condition.  It's a powerful mouthpiece, with a large chamber and a light rollover baffle.  sorry, no lig.  

$$$ See new websiteItem: WSS 

SOUND FILE on this Mouthpiece: Conn 6M "viii" vs. Couf Superba 1 vs. Mark VI

SOUND FILE:  Meyer 5 (0.069"), Bari (0.072"), Broadus NY perfected(0.055")

 

RAC_Tonalin_Tenor.jpg (132806 bytes) Robert A Carpenter alto:  Here is a White composite plastic mouthpiece and it's very nice.  We got it with its original tip and Bob Carpenter opened it up to a .082"  with a 19mm facing... and it is easy to blow, makes a big vintage tone, with just a little edge. It's a medium/small chamber, fat sound(similiar to an Ebolin), with a great price. $$$ See new website  Item: WSS

 

Vintage, YORK alto: 

York_Alto_051_001.JPG (602895 bytes)York_Alto_051_002.JPG (614844 bytes)York_Alto_051_003.JPG (210028 bytes)

Vintage hard rubber from 1920s/30s. It has a VERY LARGE Chamber, no baffle (yet) and Original Tip @ 0.051" -- Let's reface that! It will play easy.  I would say it sounds typical of a stuffy, vintage tone but after Mine or Bob's work, it can cut through in the high register--still not as loud of a mpc as others.  no ligature currently, ask me.

$$$ See new website

 Item:WWSL19.00.5241.4-29

 

sumneralto1.jpg (153511 bytes)sumneralto2.jpg (162753 bytes)Sumner Acousticut hard rubber Alto:  I was pleased to get this piece, they are really good quality hard rubber, great over all sound.  It has a large chamber and was a 5* WS model, but we had Bob Carpenter open it to a .082" tip and it's just perfect now. 

$$$ See new website Item: SSP  

 

Ponzol "Vintage" C*, hard rubber alto:  

Ponzol-CStar-Alto_067_001.JPG (656149 bytes)Ponzol-CStar-Alto_067_002.JPG (497048 bytes)Ponzol-CStar-Alto_067_003.JPG (358877 bytes)

nice hard rubber design. Designed to blend the best of the Vintage & Modern tones, folks say this has [an old Otto Link or Meyer tone, without that hefty price tag.]  ...although I had to finesse the factory table and facing, this one will play great. I just enhanced it to ~ 0.067". It plays clean with brighter abilities to push!. It has a medium(like a Meyer)-round chamber with rounded side walls. I expect a great blowing piece, excellent center core tone, with projection. no lig sorry. 

PLAY TEST: slightly brighter abilities to cut through than expected. Still Meyer-esque, but with a bit more punch. 

$$$ See new website. remind me to do some more finesse to the reface.

  Item:WWS0.00.130.1.5-C20

 

GrabBag_x13_001.jpg (548612 bytes)A.Lelandais Chantecler IV, CUSTOM hard rubber alto: from the {GRAB BAG Row 1, #2}, Hard Rubber, in non-original facing, I had to drastically help this mouthpiece be able to play by leveling the table and refacing it myself.  I knew it would be worth saving. I refaced to A.Lelandais_Chantecler_IV_alto_001.jpg (256325 bytes)A.Lelandais_Chantecler_IV_alto_002.jpg (265573 bytes)A.Lelandais_Chantecler_IV_alto_003.jpg (178450 bytes)0.081”,(photos are Before reface)  Large round chamber-with custom bullet baffle! plays great! bold and focused. I want to help find a ligature for this one. It's a unique size. So I had to modify a soprano wrap with some cor125

k inserts. (included)

Consider this: a vintage hard rubber mouthpiece, refaced with 3x the time needed, knowledge & inspection, and a sized ligature, ONE-OF-A-KIND MOUTHPIECE...

***AMAZINGLY FREE BLOWING, RAW POWER (bright tones) and there's only one out there!

All included for:

$$$ See new website Item#: WWS0.15.00.9281.2-2-C90

 

Runyon "The Spoiler" #8

Runyon-The-Spoiler-8_001.JPG (771649 bytes)Runyon-The-Spoiler-8_002.JPG (937744 bytes)Runyon-The-Spoiler-8_004.JPG (979228 bytes)

a great METAL mpc, arrived with original tip at 0.084" Nickel plated, plated lig and cap also. no spoiler insert included, sadly (thus, the cheap price!)

Sold 

Item: WWS3S7.34.441.6-012

 

Wolfe Tayne #7* alto:  

Wolfe-Tayne-7star_alto_001.JPG (414128 bytes)Wolfe-Tayne-7star_alto_002.JPG (316240 bytes)Wolfe-Tayne-7star_alto_003.JPG (346343 bytes)

looks like nickel plated brass, arrived with original tip at 0.093"wrap ligature, on arrival. good condition. large square chamber. Ask me to inspect/perfect the tip seal. 

$$$ See new website

Item: WWS3S7.34.441.6-007

 

Wolfe Tayne 3* alto rubber

Wolfe-Tayne_3Star_Alto_079_001.JPG (622743 bytes)Wolfe-Tayne_3Star_Alto_079_002.JPG (571857 bytes)Wolfe-Tayne_3Star_Alto_079_003.JPG (300364 bytes)

WWS refaced 0.079"(photos of reface "in progress"), medium chamber with side walls.

I fully expect, due to the design of this one, that it will be a VERY NICE BLOWER! I will give it the extra time for a precision reface.

$$$ See new website

Item: WWS00-00C30-01

 

Vintage 1924 BENNE HENTON alto: 

Benne_Henton_alto_001.jpg (327154 bytes)Benne_Henton_alto_002.jpg (280553 bytes)Benne_Henton_alto_003.jpg (232431 bytes)Benne_Henton_alto_004.jpg (150845 bytes)Benne_Henton_alto_005.jpg (305682 bytes)

Benne_Henton_mouthpiece_drawing.png (56104 bytes)Benne_Henton_mouthpiece_drawing_US2496749-0.png (90769 bytes)Vintage hard rubber from 1924. It has a VERY LARGE Chamber built for Classical music. The ultra-unique beak, with steep duckbill curve, patent number "B I I" and Tip @ 0.066"--Bob Carpenter touched it (it's from his private collection). no ligature currently, ask me.

Benjamin Henton:

-Sousa Band Soloist 1919-1920. 

-The first recorded playing of altissimo on sax in 1911! (info cited here: CLICK )

SOLD 

 Item:WWS-Bob's Collection

 

OTTO LINK: 

 

Otto Link "Master Link" model, 3<5* alto:

OL-MasterLinkalto5-_001.jpg (366181 bytes)OL-MasterLinkalto5+_002.jpg (332414 bytes)OL-MasterLinkalto5+_003.jpg (251828 bytes)vintage early 1930s metal mouthpiece WITH SLIDE-ON LIGATURE. These have a huge chamber, low baffle and a very reserved, warm tone. This is the model right before the "4****" model. They are not loud players...at least in original setup. This one has a refaced tip @ 0.070"! (I can't verify, but I think I know which Pro Refacer did the work). These are some of the warmest mouthpieces I have played. definitely need a mic to be heard in a group. Not every metal mouthpiece = loud. SUPER RARE ligature!

$$$ See new website Item: WWSL38.00.5241.4-1

 

Otto Link "Tone Master" model, 3* <6 alto:

OttoLinkLigs-ToneMaster_vs_MasterLink_001.jpg (363597 bytes)OttoLinkToneMaster0.074_001.jpg (440175 bytes)I had serious thoughts about keeping this one

SOLD WWS00.00.00.6261.3-0C120

Sound File: Alto MPC file (all metals): Selmer "Jazz" E, Dukoff D6 (Miami), Otto Link NY Tone Master <6, Brilhart Level Air 6*

 

Otto Link "Tone Master", 3<6* alto: 

ToneMasteralto3_6-_001.jpg (261932 bytes)ToneMasteralto3_6-_002.jpg (231328 bytes)vintage 1930/40s metal mouthpiece. It has the [9*] on the shank, a second series Tone Master with 3-digit ser#E88, These have a huge chamber, low baffle and a THAT classic Link tone. This is the model right after the "4****" model. They are credited for being bigger players than the previous era...at least in original setup. A few big players on this model: (TENOR) Ben Webster, Lester Young, Coleman Hawkins, and (ALTO) Benny Carter.  This one arrived with a reface to 0.080"! (maximum tip size for this piece) (I can't verify, but I think I know which Pro Refacer did the work).  And it plays really nice a smoky!, a quieter option for volume but very sweet in tone. currently no ligature, sorry. It is 100% worn so that brass is all you see.

SOLD Item: WWSL38.00.5241.4-2

Sound File: (all metals): Selmer "Jazz" E, Dukoff D6 (Miami), Otto Link NY Tone Master <6, Brilhart Level Air 6*

 

vintage Otto Link "Super Tone Master" 5* ALTO:

OttoLinkSTM5-alto_001.jpg (414481 bytes)OttoLinkSTM5-alto_002.jpg (219141 bytes)OttoLinkSTM5-alto_003.jpg (311173 bytes)

Another great mouthpiece from the late 70s!I believe this is the Transitional model--Large Font on the "5*", with USA.  It arrived with Original tip measures 0.068"...There were some metal bubbles forming on the table. So I opted to "enhance-reface" it and inspect the tip--I improved the tip seal too($+80). You can still see the Denim! THEN, new 24k GOLD plated the whole mouthpiece ($+70). You can see the original marks on the table and tip! ASK ME ABOUT A LIGATURE, it arrived with the one the owner bought with it, but it fits a tenor (?). I think we can work out a deal with this lig or another swap idea. But I have the lig and cap set to go with this one.

$$$ See new website Item#: WWS165.00.2111.4-C40

 

 

SELMER:

 

These S80 C* come and go so fast, you'll just have to ask if I have one!

 

Selmer S-80 C* Alto: 

Selmer_S80_C-star_alto_068_001.JPG (560801 bytes)Selmer_S80_C-star_alto_068_002.JPG (676691 bytes)Selmer_S80_C-star_alto_068_003.JPG (285332 bytes)

Hard Rubber mouthpieces, excellent quality hard rubber.  original tips near 0.065-069". Good for legit, concert band, or orchestra work. black and clean with the script faded/scratched, minor scratches on tooth zone. comes with ligature. These are (and I do) highly recommended these as a first, step-up mouthpiece.

***I try to have a small stash of these around. Usually at $95.00***

$$$ See new website Item#WWS

Sound File ALTOS file: 1950 Buescher400 Top Hat & Cane, 1947 "The Martin Alto", 1931 Conn Chu (deco), (misspoke, not a '45 B400)

 

ChaddCstarBobC_custom E.jpg (46025 bytes) Selmer S-80 C* Alto...RAC "custom S-80 E":   used but nice Hard Rubber mouthpiece from the 80's, excellent quality hard rubber.  Good for legit, concert band, or orchestra work. Bob Carpenter opened this one up to about 0.078" with a 21 facing curve.  Larger tip has much more volume and projection; no longer just a C*.  

$$$ See new websiteItem: OS0.00.0-1-BC30

 

Selmer "JAZZ" E, silver plated alto:  SelmerJazzEalto_001.jpg (281762 bytes)SelmerJazzEalto_002.jpg (164011 bytes)SelmerJazzEalto_003.jpg (204558 bytes)

silver plated brass mouthpiece from the 80s. excellent I will make this a proper 0.077", then silver plate the repairs. It arrived without a ligature, but I think I have a soprano rovner-like wrap(with metal reed plate) to include.

$$$ See new website Item#: WWS1.25.00.5171.3-C60

Sound File: Alto MPC file (all metals): Selmer "Jazz" E, Dukoff D6 (Miami), Otto Link NY Tone Master <6, Brilhart Level Air 6*

 

SelmerNYalto80_001.jpg (227046 bytes)SelmerNYalto80_002.jpg (311817 bytes)Selmer, Elkhart-New York 3, hard rubber alto, "RAC": vintage Selmer, marked "3"-RARE TOP MARKING, with links to Zimberoff stencil line of mouthpieces (aka = awesome!)...refaced by Bob Carpenter (RAC) to 0.080", also new gold script to pop. It has a medium-large, round chamber with rounded side walls. A great blowing piece! excellent center core tone with projection. My last one was an AWESOME player! reminded me of a Meyer/Link tone, but better (good price!). no lig sorry. A scratch groove on the body.

$$$ See new website Item:WWS0.39.80.581.4-B40

 

DEAL ALERT!

Selmer, Elkhart-New York 2, hard rubber alto:  

Selmer-NY-2_Alto_R069_001.JPG (677300 bytes)Selmer-NY-2_Alto_R069_002.JPG (610293 bytes)Selmer-NY-2_Alto_R069_003.JPG (255995 bytes)

vintage Selmer, marked "2", with links to Zimberoff stencil line of mouthpieces (aka = awesome!)...I just refaced it to 0.069". It plays excellent! It has a medium-large, round chamber with rounded side walls. A great blowing piece! excellent center core tone with projection. My last one was an AWESOME player! reminded me of a Meyer/Link tone, but better (good price!). no lig sorry. It plays nice, with a mild resistance.

$$$ See new website  remind me to do some more finesse to the reface.  Item:WWS0.39.50.5221.4-c15

 

Vintage Selmer D, long shank scroll shank, alto: 

SelmerDaltoLongScrollShank_001.JPG (772574 bytes)SelmerDaltoLongScrollShank_002.JPG (1348887 bytes)SelmerDaltoLongScrollShank_003.JPG (292968 bytes)SelmerDaltoLongScrollShank_004.JPG (585823 bytes)

a great mouthpiece with the desired tip that arrived with a tip at 0.074".  Comes with vintage Selmer cap(deep hue) and a replacement ligature (brass). horseshoe chamber, legit for jazz or classical.

SOLD Item: WWSL1.0W0.1271.6-006-0

 

 

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

WAGNER: 

 

WagnerJK-alto-Blankmpc_001.jpg (322201 bytes)[Wagner/J.K. BLANK] alto:  here's another winner!--a cheap option: hard rubber. No script. medium-large chamber...poised for a nice, crisp, jazz tone. Originally 0.061" on arrival, It will get reface and play crisp and clear! Likely to about 0.063-068"...or check in to see if you can request the size! Comes with one screw ligature!

Current play test: medium resistance. I'm not sure if I like that, and would certainly look into the tip for finesse work. This should be a very clear, clean tone, with free-blowing traits.

$$$ See new website

Item: WWSTc10.00.691.4-C30-2

 

wagneralto1.jpg (180867 bytes)wagneralto2.jpg (152570 bytes)wagneralto3.jpg (175371 bytes) Wagner Silver Plated Brass #5 Alto:  Really strong, German made pieces.  Like a cross between a Berg and a Dukoff.  excellent condition.  Tip size at 0.071". sorry no ligature, but ask me if I have a wrap that may fit!

$$$ See new website Item: WSS

 

The WOODWIND Co.:

 

woodwindNSalto2.jpg (191937 bytes)woodwindNSalto1.jpg (472900 bytes)woodwindNSalto3.jpg (191249 bytes)"Woodwind" hard rubber alto (N3):   

Terrific material and good classic design.  Larger chamber makes for a big vintage sound.  reminds me of a slant signature sound but a but more 'vintage-nasal' with the 0.062". Comes with a vintage, brass ligature too.  

$$$ See new websiteItem: WWS0.00.00.8201.2-0 

Sound File (feat. this mpc): A.Lelandais, Woodwind Co., Meyer5

Sound File (feat. this mpc): Buffet C2(0.085"), Woodwind(0.080"), Woodwind(0.061") 

Sound File (actual mpc!):  Selmer "TableC*" 0.065, Bilger-Morgan 1-C 0.057, Buescher 0.055, Broadus 0.058, Woodwind "N8" 0.062 AltoMPCs-x5-pic_selmer_morgan_buescher_Broadus_Woodwind.jpg (136608 bytes)

 

WoodwindCoAltoB5.jpg (1651742 bytes) "Woodwind" hard rubber alto (B5):  Terrific material and good classic design.  Larger chamber makes for a big vintage sound.  reminds me of a slant signature sound. Bob Carpenter just opened this one up (usually a 85.00 job) to a easy blowing .077", just found a ligature to go with it too.  

$$$ See new website Item: WSS

 

Sound File (similar

Sound File (similar mpc): Otto Link Slant-80, Meyer Bros NY-85, Woodwind-80  ***(Meyer= 85, I misspoke)

SOUND FILE (actual mpc!): Altos file: Buffet SDA 1972 vs King Marigaux SML 1970

 

"Woodwind Co" hard rubber alto (J5):   

Woodwind-Co_J5_alto-CRB-078_001.JPG (534111 bytes)Woodwind-Co_J5_alto-CRB-078_002.JPG (645874 bytes)Woodwind-Co_J5_alto-CRB-078_003.JPG (687569 bytes)Woodwind-Co_J5_alto-CRB-078_004.JPG (592656 bytes)Woodwind-Co_J5_alto-CRB-078_005.JPG (335016 bytes)

Woodwind-Co_J5_alto-CRB-078_006.JPG (730347 bytes)Woodwind-Co_J5_alto-CRB-078_007.JPG (522063 bytes)

Terrific material and good classic design.  Larger chamber makes for a big vintage sound.  reminds me of a slant signature sound but a but more 'round'/less focus with the WWS Refaced tip at 078". I have to say, I did my very best to copy my personal Woodwind Co. mpc. This one plays darker than my personal favorite, but just as free blowing. 

$$$ See new website Item: WWS0.00.00.10101.6-C60 

 

 

VANDOREN:

 

Vandoren V16 #M-A9, Alto:  

Vandoren-A9-alto_001.JPG (238789 bytes)Vandoren-A9-alto_002.JPG (240562 bytes)

Rubber, arrived with original tip at 0.089" no ligature, on arrival. Ask me for extras if I can help with the ligature. like new condition

SOLD

Item: WWS3S7.34.441.6-002

 

VITO: 

 

Vito Melodia- 3V, alto:

Vito_Melodia-3V_alto_071_001.JPG (680650 bytes)Vito_Melodia-3V_alto_071_002.JPG (829314 bytes)Vito_Melodia-3V_alto_071_003.JPG (269523 bytes)

Medium chamber. I refaced it to a 0.071". (reface in Progress). I think this is going to be a great player with a classic Meyer tone, but with more focus.

$$$ See new website 

Item: WWS00-00C60-02


YANAGISAWA:

 

Yanagisawa #9, silver metal Alto:  

Yani-Alto-metal-9-003.JPG (433077 bytes)Yani-Alto-metal-9-001.JPG (396846 bytes)Yani-Alto-metal-9-002.JPG (410105 bytes)Yani-Alto-metal-9-004.JPG (461722 bytes)Yani-Alto-metal-9-005.JPG (371991 bytes)Yani-Alto-metal-9-006.JPG (555930 bytes)

silver plated brass, with a nice #9 (!!!) arrived with original tip at 0.097".  a Rover ligature, on arrival, original metal cap with a few dings. Square chamber. These are well-loved and have a nice clean tone. Good for many genres.

$SOLD

Item: WWS3S7.34.441.6-014

 

Yanagisawa (Yani), rubber, #6, Alto:  

Yani-rubber 6_ alto_074_001.JPG (660461 bytes)Yani-rubber 6_ alto_074_002.JPG (665756 bytes)Yani-rubber 6_ alto_074_003.JPG (250768 bytes)

Medium round chamber with original tip at 0.074"

$$$ See new website Item: WWS00-00C30-01

 

 

 

MUSEUM ARCHIVE

Check the MUSEUM for Past Sales, mouthpiece options, and linked Sound Files!

 

 

 

 

 

     I get a lot of questions about my old friend Bob Carpenter... 

Bob got a lot of mouthpiece refacers started, such as Theo Wanne, who in turn, got others started later... 

but no one does nicer work than Bob.  Check out "Bob's Page" to know more: READ ON...

 

A professionally custom refaced mouthpiece will almost

always play better than a factory facing.

 

Runyon Teeth & Mouthpiece Savers?  

RunyonTeethAndMouthpieceSavers_001.jpg (465114 bytes)Yes, available with mouthpiece/sax purchase. Packs of two are available for $4.00. Wow, prices went up! But these are Runyon mouthpiece savers. Both the same or mix and match.

     BLACK: thick cushion. more like foam. sharp teeth may cut through.

     CLEAR: thin with simple cushion. stronger than Black.

      Sarge liked both separately AND even put a clear over the black for longevity and cushion!