SOLD - A pro sax that is the precursor to the Julius Keilwerth SX90. Don't let the "Buffet" label fool you; this is a Keilwerth sax. complete with the C/Eb design, high F# layout, and don't forget the adjustable palm key heights too! Serial # 98,xxx, it was built in about 1992. The dating is less exact on this era, but all info points to 1991-93. In the history of companies, Buffet and Keilwerth came under one ownership. Rumors from a friend/player in Iceland: These being made in the Buffet factory for Keilwerth. This seems correct as the pearl design is not that of Keilwerth (large version), but more like Buffet. SOUND: These are supremely warm and meaty, although not as meaty as my Couf or older JKs. I must insert the rumor here: factory talk of blending the JK with Buffet to build a [JK classical tone]. It this is true, I concur with this attempt because the sound is a bit more focused and reserved than my other Keilwerths in the shop (and my personal horn). REBUILD: I'd like to sell this with a full rebuild, and set it up to your specifications because it is playing on the original pad setup and it beginning to show age beyond what will be enjoyable. Let's discuss what you'd like; otherwise, I can put the JK Standard setup on it: seamless-domed, nickel resonators, on tan pads. CASE: original case in good condition.
Conn 1941 ’10M’ Bb Tenor, #295,xxx (Archived)
SOLD - Looking for a loud Conn 10M under $2000? Since I see a faint engraving, I must say "re-lacquer"; the previous owner was sold this sax as Original, but I doubt that it is. The wear on the bell could be from use, or old buffing. Wear and tear report: A few dents in the rear bow, rolled tone holes that do look like some were flattened, none appear to be filed through the 'roll', no missing set-screws(one was cut into the post to remove--upper octave button post), one replaced pivot screw(C#1), upper bell lip has slight bent (I can help). Overall, it's a complete 10M with a huge, loud sound.
SOUND: This one is particularly "crisp" in tone. I suspect this tone is due to the mostly bare-brass finish.
PADS: the setup is tan pads on smaller flat resos with rivet (similar to Conn originals). Some pads with rivet only. I would guess, depending on use, they are 10-25 years old. They will play as is, with mild tuneups along the way, for another 1-7 years(depending on use).
CASE: a very nice Hiscox case! ($280+).
I would recommend this sax get a full rebuild to be enjoyed fully, however, since it can play great for a while with some tuneups, I will sell it with two prices.
Keilwerth ‘ST-90, Series 1’ Bb Tenor, #870,1xx (Archived)
SOLD - Here's a great used, one-of-my-favorite, not-thrashed models! New in the last 10yrs-ish, serial #870,1xx, newer construction, gold lacquer throughout! No high F# but a great tone! This model has the real pearls, which makes it either the Series I or III(there's not a known dating to really know; I would guess Series 1) . I've seen some of these hold their own with some pro saxes just in the tone. These have very comfortable, modern keywork and should not hinder any student getting started. Comes with good case and mouthpiece.
Cosmetic condition rating: 8.5
Minor PC repairs needed - pending.
Item #:WWS0E4.7E6.00.2211.7-C0
Otto Link ‘RG-Berg Larsen’ Tenor, Rubber – 0.118″ (Archived)
SOLD - A newer hard rubber mouthpiece for the advanced player. very large tip size is not for beginners. The bullet designed chamber is that of the Berg Larsen tone. (my personal bias). Description from the JJ Babbit Company:
"Want your music soft and mellow?
Bright and edgy?
Have it your way with the all-new RG, by Otto Link.
The Easy-to-blow RG has a unique parabolic chamber for big, dynamic sound at all projection levels. A hard rubber tooth protector runs full bite length; the thickness encourages an open embouchure allowing a big sound. Available in hard rubber or satin stainless steel finish.
Satin gold plating available as special order.
Choose from three tip openings: .108", .118", .128"
Another jj Babbitt exclusive."
Item:WWSWWSL4.7W6.12151.6-017
Berg Larsen ‘120-2-M(offset)’ Tenor, 1960s Scoopbill (WWS Repair)- 0.118″ (Archived)
SOLD - Tip seal was enhanced here at WWS for very minimal change [near original tip at 0.118"]. With original ligature and cap.
Brilhart ‘Hard Rubber – #3*’ Tenor, Ser# 122576 (RAC Reface) – 0.105″ (Archived)
SOLD - Sound File - These are one of the best Hard Rubber Mouthpieces ever made. These have a a Nice big sound, medium tone, not too dark, not too bright, Sarge had THREE in his collection for a while-- It's "best of" material! serial number 122576. Bob Carpenter reface to a highly desirable 0.105". Item: Bob's Collection
Other: ‘Penzel Mueller “New York”‘ Tenor, Hard Rubber – 0.065” (Archived)
SOLD - Is this a from a Brilhart "Hard Rubber" blank??? After a customer noticed the similarities to the Brilhart "Hard Rubber" mouthpiece design.
Other: ‘Coast R4’ Tenor, 1960-80s, Hard Rubber (Selmer Copy)- 0.085″ (Archived)
SOLD -Refaced elsewhere. We will do work to this mouthpiece. Please inquire for additional information.