Tenor Mouthpieces

$269.00 - Large chamber makes for a big vintage sound. Now it has a 0.098" tip and I left some baffle material to help give it punch and treble/presence. Original facing "J5" marking.

SALE $355.00 (was $450.00) - Tip seal was enhanced here at WWS for very minimal change [near original tip at 0.118"]. With original ligature and cap.

$599.00 - Looking for an early Otto Link for half the price!? This is your best option! A research piece!: Serial Number 8803 currently not tracked on Theo Wanne mouthpiece info pages - This mouthpiece may be one of the later ones made (1942+). According to Wanne's current listings, the…

$2,500.00 - Ultra Rare Combo Set - Collector's delight - Rare Streamline model with "ST" matching ligature with the "AB". All in fantastic condition.

$42.00 - vintage plastic mouthpiece with good material; no serial number keeps the price lower!. The original tip is at 0.074" , vertical table markings. side-walled chamber and a true Brilhart-tonalin-ebolin sound = clean, simple, warm. Less cut in the tone. Comes with a New nickel ligature.

ON TRIAL $99.00 - This is an Ebolin with a nice, early 5-digit ser#83,039. Original facing tip at 0.084". This one plays very strong with the characteristic Brilhart sound--medium chamber with flat side walls. Looking for a Tonalin sound, without the Tonalin price?! ...This is a great option! a bit…

SOLD - These are one of the best Hard Rubber Mouthpieces ever made. We got it as an altered #6 tip and I'll have Bob Carpenter open it up to perfection... There was a minor tooth groove I had Bob fix also. These have a a Nice big sound, medium…

$179.00 - This mpc is a nice free blowing mpc with a tip measuring 0.090". Ser # 10749 There was a small tooth imprint that Bob C repaired. I may cover the bite pad with a clear bite tab--typically needed on these mouthpieces. It blows a big sound with heavy…

$349.00 - Don't let the black plastic material fool you. These are well respected. This mouthpiece has the Circle wood-grain tooth pad. Bob Carpenter did the reface to a 0.096". 6-digit: 189662, The chamber has mild/medium side walls, with a great sound. Description: " a [long "E"2], horizontal table, plastic,…

$349.00 - Don't let the black plastic material fool you. Mouthpiece with the Circle wood-grain tooth pad. Bob Carpenter did the minor perfection of the reface to a 0.090" and facing length of 22mm. He also filled the tooth groove. As usual, Bob's work looks excellent! 4-digit! #7455, The chamber…

$275.00 - These are always great. Wood-grain tooth pad in Excellent condition!! Original tip to a 0.082"! There are no cracks to mention. serial number is 6-digit 100K. It plays very easy and has a centered, Mid-Tone core to the tone. These have a medium chamber with shallow side walls.…

$189.00 - This one arrived on its deathbed. 🙁 but Bob is amazing; he saved it--tooth groove, tip repair and reface! Bob Carpenter refaced the tip to a 0.100" with a 23mm facing--"RAC". It is a longer facing that my normal so my embouchure had to adjust to this piece…

SOLD - Plays excellent - huge 1940s tip - It measures near a modern "6*" at 0.094" and due to the table marking and the tip material, I can't see how this wasn't original.

$899.00 - From Sarge's Collection! - An ultra rare Brilhart mouthpiece with Original ligature! Recently released to be listed "for sale" from Sarge's Collection. This mouthpiece has serial # M1029 on it. Item#: SSPestate00.00.11201.7-BC-002

$139.00 - Paired with Conns from 1935-56, these had several options. The "No.5" (of the 6 sizes) was, according to Conn Loyalist: "A short facing with Medium-wide tip opening. The most popular all-purpose mouthpiece. Fine for solo work. Gives Larger Volume than Lay No.2." I find this entertaining because the…

$125.00 - Here's another great, hard rubber mouthpiece. As Bob says: "these are the good rubber...they even taste like it". Ha, dare I say, he's right. you can taste the quality rubber. (I hope my cleaners can also act as as sealer to the rubber--to help the playing experience away…

$30.00 - These can be great players. Email for more information. Item: WWSL4.7W6.12151.6-013

$699.00 - A uniquely, ultra rare Dukoff mouthpiece from Chadd's Collection that matches all the design measurements for a C-Melody mouthpiece.  It was really tricky on arrival and it sent me into heavy research. The photo comparisons sum it up though. It contained elements from two eras of Dukoff: the…

$1,200.00 - Sarge's notes on this one: "Nickel silver plated brass (prototype to SPC or Dave Guardala), original tip D8, unfooled with--$1200." Original tip @ 0.113". It plays big and awesome! See the SOUND FILE.

SOLD - These are often called the "Transitional" model as they were after the brass era (BD and Stubby) and before the Silverite ("Miami, FL"). The original tip @ 0.112" was touched by another famous mouthpiece refacers. It plays as big and awesome as Sarge's did! (I put them side…

$45.00 - Plastic. Inquire for additional information. Item: WWSL4.7W6.12151.6-003

SOLD - Yep. The Bomb right here. The handmade greatness.  The sound is awesome; made to mimic King Curtis--Sarge's favorite--there is a high baffle and cutout. The Brecker handmade model screams! Very bright with strong power and depth, super free blowing.

SALE $59.00 - Markings of "2". Bob Carpenter did reface to a 0.100" and facing length of 23mm. He also slightly filled the tooth groove. Plastic mouthpiece with a Medium-Small chamber with flat sidewalls. Item:WWS00.00.9151.1-B45

$69.00 - Originally supplied with the King Marigaux, by SML. all original and excellent. Original tip @ 0.072".

$69.00 - I'm going to call these the [Committee III] model, because they came with that model of sax. Here is an early 50s/60s Martin plastic mouthpiece (originally paired with "The Martin ____" horns) . They are good players with a mild-vintage tone--a bit more nasal tone compared to #1…

SALE $49.00 - I'm going to call these the [Committee III] model, because they came with that model of sax. Here is an 50s/60s Martin plastic mouthpiece (originally paired with "The Martin ____" horns) . They are good players with a mild-vintage tone--a bit more nasal tone compared to #1…

SALE $199.00! - By it's general looks, i would say this is a ca. 1970's mfg. It's in excellent condition and of course i sent it to Bob to perfect the tip and facing. He has made this one a .100" tip , with a 22mm facing length. This batch…

$50.00 - Vintage hard rubber mouthpiece with good material. "france" on side, It has medium-small-medium chamber. The original tip is at 0.062" ...we can talk about this getting a reface. Item:WWS0C0.00.111.6-0

$80.00 - vintage hard rubber mouthpiece with good material. "france" on side, It has small chamber. The original tip is at 0.073" ...we can talk about this getting a reface.

SALE $99 ($139.00) - Vintage hard rubber mouthpiece with good material; "B6" on the table (like a Woodwind Co.), "A2" on the side, It has small chamber into the throat of the mouthpiece, with a small step-ledge as it opens into the medium chamber. REFACED by Bob Carpenter to a…

$45.00 - Is this a from a Brilhart "Hard Rubber" blank??? After a customer noticed the similarities to the Brilhart "Hard Rubber" mouthpiece design, I looked into this one further. Under inspection: -yes, the side walls vs the rounded walls. -the HR has a longer beak tooth pad, but shorter…

SALE $79.00 - plastic composite mouthpiece with inner side walls (like a JK slimline), a very nice player with free blowing tip measuring an original 0.101" after Bob met the tip! Looking for a bargain mouthpiece? Ignore the lesser-known name, and you get a good player!

$499.00 - Warm, Vintage Tone all the way - from the vintage era of the late 1930s and made in New York, a metal mouthpiece that is not loud and bright. These have a huge chamber, low baffle and a very reserved, warm tone. Original tip at 0.070", and I…

SOLD - WWS Refaced - In bare brass finish, this mouthpiece plays big and warm. These have a huge chamber, low baffle and a very reserved, warm tone.

$450.00 - Looking for the vintage Coleman Hawkins sound? This is a good start! Warm, Vintage Tone all the way - These have a huge chamber, low baffle and a very reserved, warm tone. Serial number: R86. It arrived with an original tip at 0.064", consider a reface up to 0.080"(modern…

SOLD - Iconic! - Made of some of the best hard rubber. wide table, side number stamp = series 2 model (of 3). The horizontal table markings are not quite there (not my doing). There will be no hype here. This is one of the most sought after tenor mouthpieces.…

SOLD - A #5 Tone Master tenor mouthpiece with original ligature - both at about 15% original plating on arrival. This mouthpiece has serial # K72 on it. It arrived with the tip at the original 0.080" tip size and the tip and rails are in good shape but they…

$240.00 - These are fun, from the 80s. They have good focus with a mid, core tone and easy response. It arrived needing minor repair at the tip to level the seal. I did that, and set it up at a correct 'E' tip measuring 0.084", and silver plated it…

$325.00 - These are neat mouthpieces from 1955+(short shank). They have good focus with a mid, core tone and easy response. It's a metal mouthpiece without a cutting, bright tone - just a bit more kick than a rubber version. There is a little natural wear on the table and…

$249.00 - Won't last! - Great Player! One of the most desired mouthpieces with a modernized tip. Made of excellent quality hard rubber. It arrived with the refacing work done. It has longer facing length at 26mm.

ON TRIAL - $249.00 - Won't last! - Great Player! One of the most desired mouthpieces with a modernized tip. Made of excellent quality hard rubber. It arrived with the refacing work done. It has facing length at 25mm.

$219.00 - Hard Rubber mouthpiece, script in good condition! Quality hard rubber, tall-wide horseshoe chamber... Original tip at 0.076". Good focused tone. Very versatile for concert band, or orchestra work, or subtle vintage jazz. Comes with original metal ligature and cap! (valued at $40-80) Item: WWS0W0.0W0.3101.7-0

SOLD - One of the most loved hard rubber mouthpieces in an ultra-rare Tip size "E"! The soloists are very versatile and can cross many genres and the larger tip on this one will add some punch to the sound (that is something that most people complain about with a…

SOLD $189.00 - New era design is a copy of the vintage horseshoe chamber. The horseshoe chamber appears to be between the eras of the short shank and the long shank design -- splitting them 50/50 in width and height! I think there's some real hope in this one!!! Used,…

$299.00 - A well-loved, vintage Selmer mouthpiece that plays great - Art Deco logo, fluted side walls, slide on ligature and cap set!... and in a rare "E", original tip! It is all in good condition with silver plating intact.

$80-135.00 - Multi-Listing: These come in so often, their info will land here. Hard Rubber mouthpiece from the 1980s/90s/00s. These are well known & loved by teachers. They have a very clean, focus to the tone. square chamber. They are a worthy 1st Step-up mouthpiece. I always try to keep…

$70.00 - Good for legit concert playing. Great tip size for a beginning player. Please inquire for additional information. Item:WWSL4.7W6.12151.6-016

$95.00 ... TBD - Hard Rubber mouthpiece from the 1980s/90s/00s. These are well known & loved by teachers. They have a very clean, focus to the tone. square chamber. They are a worthy 1st Step-up mouthpiece. I always try to keep a few on hand for students: $95-$135. Or you…

$45.00 - A plastic copy or prototype to the Selmer scroll mouthpieces. You can see in the photos the similarity! The facing will need worked on and opened up to an enjoyable size (060-078 likely). Item:WWSL4.7W6.12151.6-009

$199.00 - Really strong, German made pieces originally measured 0.075", I think Bob opened it up to 0.100" ***(CORRECTION: 0.100", not .103 like recording.) I am guessing on who did the work based on me knowing some of Bob's craftsmanship. Like a cross between a Berg and a Dukoff, It…

$189.00 - a really nice hard rubber mouthpiece with the no logo. It arrived at an original small tip 3 @ 0.062". I refaced it to 0.080". These can have a mild warmth, nice focus, but big tone from larger tips. sound is strong in the MID range with a…

$249.00 - A really nice hard rubber mouthpiece with the "JK" logo faint on the shank. It arrived at an original small tip 6 but with a chip. So I refaced it to a JK 8* or 0.107" at the tip. This is now a Wagner 11*, Otto Link 7**,…

$133.00 - Metal, rock & roll Loud mouthpieces, tip measuring 0.078", baffle is a mild rollover slope style. Mpc shows mild wear--little marks from case bouncing, not affecting playability. comes with new, replacement, lacquer ligature.

$180.00 - vintage hard rubber mouthpiece with good material. "france" on side, It has large round chamber. The original tip is at 0.071" ...we can talk about this getting a reface.

SOLD - Terrific material and good classic design. Large chamber makes for a big vintage sound. It arrived with the engraved "BP 0.110" on the side with excellent finish work by Brian - Super professional! I liked it but I felt that it was missing ... just that 'extra umph'.…

SALE $180.00 - was 269.00 - Terrific material and good classic design. Large chamber makes for a big vintage sound. Bob Carpenter just opened this one up to a easy blowing .105" with a 23mm facing length. Item:WSS

$269.00 - Large chamber makes for a big vintage sound. Now it has a 0.098" tip and I left some baffle material to help give it punch and treble/presence. Original facing "J5" marking.

$399.00 - Here is another awesome, rare mouthpiece. heavy body brass design, ser# "X324". This mouthpiece blows really well and the tip is 0.105" (refaced by "a guy") and then improved seal by me. The bite plate is a replacement (black). I opted to buff off refacer's name because I…