$1,649.00 - Vintage pro Yamaha and the roots of their legendary tone. Plays great!
Read MoreYamaha 1970s ‘YAS-61 “Purple Logo”‘ Eb Alto, #010,546A

$1,649.00 - Vintage pro Yamaha and the roots of their legendary tone. Plays great!
Read More$1,749.00 - A clean YAS61 with a upgraded Protec case, optional repairs mentioned.
Read More$169.00 - A rare Yamaha soprano mouthpiece made of hard rubber or blended composite (it definitely has some rubber). Straight baffle, straight side walls into a very small round chamber. This one is in great condition and also has a thin front tip rail --that's a good thing and not…
Read More$49.00 - a rare "Custom" mouthpiece in excellent condition. Round Chamber design with yellow ligature to match.
Read More$349.00 - Some of my favorite mouthpieces! - The large chamber model is more in demand, and these play great after a reface.
Read More$189.00 - Terrific material and good classic design. Larger chamber makes for a big vintage sound. reminds me of a slant signature sound. Bob Carpenter just opened this one up (usually a 85.00 job) to a easy blowing .077", just found a ligature to go with it too.
Read More$133.00 - Metal, rock & roll Loud mouthpieces, tip measuring 0.078", baffle is a mild rollover slope style. Mpc shows mild wear--little marks from case bouncing, not affecting playability. comes with new, replacement, lacquer ligature.
Read More$249.00 - A really nice hard rubber mouthpiece with the "JK" logo faint on the shank. It arrived at an original small tip 6 but with a chip. So I refaced it to a JK 8* or 0.107" at the tip. This is now a Wagner 11*, Otto Link 7**,…
Read More$199.00 - Really strong, German made pieces originally measured 0.075", opened it up to 0.100". Like a cross between a Berg and a Dukoff, It has side walls in the chamber. Great condition. Sorry no ligature currently.
Read More$139.00 - Original facing and tip - chamber design has the side walls, also with a higher floor than the throat.
Read More$899.00 - Here's a used, newer model of Vito. It is a Taiwanese made era. Serial #AK31,508,051, newer construction, rose gold lacquer, nickel keys (good for kids), Real pearls!, with high F#! These have very comfortable, modern keywork and should not hinder any student getting started. Comes with black Vito…
Read More$119.00 - Early era Vandoren in fantastic original condition; designed for classic tone with oval chamber.
Read More$119.00 - Early era Vandoren in fantastic original condition; designed for classic tone, medium-small round chamber.
Read More$119.00 - Early era Vandoren in fantastic original condition; designed for classic tone.
Read MoreSOLD/ON HOLD- SALE $409.00 - Barely used Model 3 Gaia with original Enlightened ligature. Clean, inspected, and ready to go!
Read More$699.00 - The latest model of the Durga! TW: "It can scream or play a soft ballad."
Read MoreSOLD - A great modification part to consider for your Conn "Chu Berry" Tenor (New Wonder 1 or 2).
Read MoreSOLD - Rare Selmer Neck with original working pick-up! These don't come for sale very often!
Read MoreSOLD - A gold neck for Selmer Mark VI's (replacement or supplemental). It offers a clear tone and easy response. This neck has an outside diameter of 27.55mm (27.50-.59). Recently released from Sarge's Collection. Sarge had it as an extra neck with one of his Selmers in the past. It…
Read More$139.00 - A rare Brilhart or King ligature in excellent condition. I've seen both come with it. Recently released to be listed "for sale" from Sarge's Collection. Sarge had it on a Martin Centennial tenor mouthpiece, but I can't verify that he acquired them as a set.
Read MoreSOLD $50.00 - Inverted screw design, with dual reed plates. I was told this was a Gold model, I think it is but I'm not sure. So I'll make it a fair price for either the lacquer or gold finish (Compare new at $88 or $110).
Read MoreSOLD - Ligature and cap from early 1960s era Selmer Mark VIs - originally paired with Selmer Soloist mouthpieces and Mark VI saxophones. Color is a nice, deep yellow. MATCHING on the ligature. Cap = very good condition with 90% lacquer remaining. Ligature = 60% lacquer remaining.
Read More$269.00 - Real smooth & Rich, large chamber S3 model. Script isWWS REFACE 0.074" . I will find a ligature to pair with it. These are hard to find mpcs and we love them. (this one actually has a 2-3mm shorter body{center of mpc} than the 0.070" listed here at…
Read MoreSOLD - A high-end ligature for a small mouthpiece. It is a soprano (metal soprano) sizing and I even tested it to possible fit on a Selmer JAZZ Alto mouthpiece. Does not fit rubber soprano (like Selmer S80). It is in near-new condition with the box and the packing box…
Read More$2,099.00 - (Off-site Listing: France) Another great SML alto with two-tone finish and straight tone holes.
Read MoreREDUCED! $4,799.00 - SOUND FILE - A beautiful GM1 model with great pads, new case, and that huge, fat, SML tone during some of their best years. A very clean sax!
Read More$69.00 - Baffle and chamber design support a "clean, French, Classical" tone. It's slightly smaller than "medium" as it enters the throat. I see some rollover baffle that may add some presence to the tone.
Read More$8,199.00 - The rare find: a one-owner horn! - loved and cherished. Original lacquer, tri-pack case...! Bonus: a mouthpieces included.
Read More$7,699.00 SOLD - The end of the great serial number era! Original lacquer with tri-pack case.
Read More$17,999.00 - Brecker era Mark VI with gold plate upgrade. 100% pro level horn.
Read More$14,999.00 - An ultra rare vintage bari WITH low A & a deluxe WWS Rebuild: Premium Upgrades + Gold plate Resotech resos!
Read More$6,199.00 - REDUCED! - a stunning "sailboat" example of an early Selmer BA that was loved and preserved. A must see!
Read More$45.00 - A plastic copy or prototype to the Selmer scroll mouthpieces. You can see in the photos the similarity! The facing will need worked on and opened up to an enjoyable size (060-078 likely). Item:WWSL4.7W6.12151.6-009
Read MoreON TRIAL $115.00 - Hard Rubber mouthpiece from the 1980s/90s/00s. These are well known & loved by teachers. They have a very clean, focus to the tone. square chamber. They are a worthy 1st Step-up mouthpiece. I always try to keep a few on hand for students: $95-$135. Or you…
Read More$100-200.00 - Multi-Listing: These come in so often, their info will land here. Hard Rubber mouthpiece from the 1980s/90s/00s. These are well known & loved by teachers. They have a very clean, focus to the tone. square chamber. They are a worthy 1st Step-up mouthpiece. I always try to keep…
Read More$95-175.00 - **Usually some in stock; rotating inventory** Hard Rubber mouthpieces, excellent quality hard rubber. Original tips should be 0.065-069". Good for legit, concert band, or orchestra work. Retail New is now pushing $203.00
Read More$149.00 - VALUE PACKAGE: WWS worked on the table, facing, and tip; also adding new gold script to highlight. It arrived as a "damaged C" ; now a more desired C* tip size.
Read More$149.00 - Used but nice Hard Rubber mouthpiece from the 80's, excellent quality hard rubber. Good for legit, concert band, or orchestra work. Bob Carpenter opened this one up to about 0.078" with a 21 facing curve. Larger tip has much more volume and projection; no longer just a C*.
Read More$219.00 - Plays awesome! - vintage Selmer, marked "3"-RARE TOP MARKING, with links to Zimberoff stencil line of mouthpieces (aka = awesome!)...refaced by Bob Carpenter (RAC) to 0.080", also new gold script to pop. It has a medium-large, round chamber with rounded side walls. A great blowing piece! excellent center…
Read MoreSOLD - TIP at C** now, an iconic mouthpiece with datable pairing to 1963 and with original ligature and cap.
Read More$325.00 - These are neat mouthpieces from 1955+(short shank). They have good focus with a mid, core tone and easy response. It's a metal mouthpiece without a cutting, bright tone - just a bit more kick than a rubber version. There is a little natural wear on the table and…
Read More$89.00 - Nice hard rubber design. Designed to blend the best of the Vintage & Modern tones, folks say this has [an old Otto Link or Meyer tone, without that hefty price tag.] ...although I had to finesse the factory table and facing, this one will play great. I just…
Read More$700.00 - with original ligature, vintage Dexter Gordon tone!
Read More$110.00 - Sound File - Used rubber mouthpiece with a smaller chamber and side walls. Material on the baffle, creating a baffle adding treble and projection. It comes with a Rovner wrap ligature ($20).
Read More$799.00 - From Chadd's Collection: I am really fascinated by this sax. There are so many ornate features! It has some of the most elaborate tube rings with 3D weave on the bell lip too! The sheet metal octave key on the neck is where she gets her nickname: "The Ram",…
Read More$89.00 - Vintage hard rubber from 1920s/30s. It has a VERY LARGE Chamber, no baffle (yet) and Original Tip @ 0.051" -- Let's reface that! It will play easy. I would say it sounds typical of a stuffy, vintage tone but after Mine or Bob's work, it can cut through…
Read More$45.00 - Please inquire for additional information.
Read More$79.00 - Large chamber. May look like a vintage 1920/30s Selmer stencil due to the "D" on the table. The "RAC" stamp is to say that Bob put his mark on it.Please inquire for additional information. Item: WWSL4.7W6.12151.6-020
Read More$79.00 - Vintage 1920/30s, Large Chamber, Tip .082" Refaced by Bob C.
Read More$69.00 - Vandoren Look - Made of a unique hard rubber, it has a shallow beak and high chamber build, low baffle and slight rollover at the tip from my reface. It is now refaced to 0.077". The chamber is almost a standard "medium" except it has some rounded sidewalls…
Read More$59.00 - Original tip was @ 0.055” (now a WWS Reface 0.071") , hard rubber, large chamber. Similar to a Conn eagle.
Read More$135.00 - Large chamber. I was refacing it to about 0.078". (to be finished, photos are 'during' reface.) I was coping the curve of my favorite Woodwind Co alto mpc. The metal table is extremely durable and difficult to reface. On the bright side, it will hold it's curve once…
Read More$179.00 - Hard Rubber, in non-original facing, I had to drastically help this mouthpiece be able to play by leveling the table and refacing it myself. I knew it would be worth saving. I refaced to 0.081”,(photos are Before reface) Large round chamber-with custom bullet baffle! plays great! bold and…
Read More$50.00 - Vintage hard rubber mouthpiece with good material. "france" on side, It has medium-small-medium chamber. The original tip is at 0.062" ...we can talk about this getting a reface. Item:WWS0C0.00.111.6-0
Read More$299.00 - Large Chamber Tenor Mouthpiece, rich and dark tone. "L" Chamber is almost the darkest option.
Read MoreSOLD - Protection for your soprano, alto, or tenor reeds. "Reeds will rest on an acrylic plate and be held in place with velvet."
Read More$15.00 - This starter kit is geared for the Alto/Tenor students we serve who are just starting out. It's built by the Prestini company with a cloth, long swap, short swab, mouthpiece brush, small brush, cork grease, and reed case.
Read More$2,399.00 - THE vintage Meyer 5M that legends speak of! (Offsite Consignment, located in U.K.)
Read MoreSOLD - A legendary mouthpiece - one of the best of all time! I still can't forget playing one and that was years ago. Item location: United Kingdom
Read More$125.00 - A newer Meyer 5M mouthpiece in excellent condition. Classic jazz and a well-known model.
Read MoreSOLD - This is the Version 2 of the "New York" models. Original tip - These are still better than the 80s/90s Meyers.
Read MoreSOLD/ON HOLD - THE Paul Desmond model mouthpiece. Original facing.
Read More$950.00 - Vintage MC Gregory, triple-rail, with OFFSET center rail - even more rare! From Chadd's Collection!
Read More$1,399.00 - One of the most rare and sought after Gregory mouthpieces made famous by Gerry Mulligan.
Read More$2,299.00 - It's not a complete "looker" but I have some very high expectations that that means it will be a great "player"; as tends to be the case -- ugly ones play better. It is a tricky relac that had me thinking twice because the engraving was well protected.…
Read More$1,599.00 - Here's a great Committee III Alto with some older, used pads that will be good for a while. It looks like 1990s age with plastic resos. There are some small dings and pings that I can work with and the bell lip edge is the worst of the…
Read More$2,599.00 - Beautiful dark lacquer body from an excellent era (1940s); great pads (WWS Rebuild) and a great sax to play and enjoy!
Read More$3,999.00 - Ultra rare baritone version of the Typewriter model. Overall in excellent physical condition, and comes in a Protec case.
Read More$2,299.00 - A rare beauty in excellent condition with good pads and case!
Read MoreSOLD - Original silver plate in excellent condition. It was "VIP Scouted" for a customer. Serial #42k, Straight C soprano in beautiful condition. Original case. Martin sopranos are some of Sarge and my favorites! They are well-built in strong metal. Intonation is easy to enjoy and I'll test a few…
Read More$2,299.00 - A rare Martin curved soprano with excellent silver plate, goldwash bell, Rebuild with black roo pads and domed metal resonators.
Read More$199.00 - A bargain price on a slimline model! Focused tone and baffle for cutting bite in tone!
Read MoreSALE $49.00 - I'm going to call these the [Committee III] model, because they came with that model of sax. Here is an 50s/60s Martin plastic mouthpiece (originally paired with "The Martin ____" horns) . They are good players with a mild-vintage tone--a bit more nasal tone compared to #1…
Read More$69.00 - I'm going to call these the [Committee III] model, because they came with that model of sax. Here is an early 50s/60s Martin plastic mouthpiece (originally paired with "The Martin ____" horns) . They are good players with a mild-vintage tone--a bit more nasal tone compared to #1…
Read More$139.00 - I'm going to call these the [Committee III] model, because they came with that model of sax. Not expensive, really nice sound. Bob Carpenter has just refaced it to a 0.078." Item: WSS00.00.11
Read More$1,499.00 - A low A entry level baritone with good pads, case, peg stand, & harness! Taiwanese build, modern octave venting.
Read More$3,999/3,150.00 - Golden lacquer finish with silver neck! #470k dates it to about 1971. It is a later serial number, but that only helps save you money in this case. Don't let that scare you away from a baritone that you don't see come for sale often!
Read More$5,499.00 - Good looks + boisterous, classic tone; all with good pads and the upgraded brass resos.
Read More$69.00 - Originally supplied with the King Marigaux, by SML. all original and excellent. Original tip @ 0.072".
Read More$275.00 - From Sarge's Collection - A rare 1940s mouthpiece in excellent condition, with original ligature and slide-on cap!
Read MoreSALE $59.00 - Markings of "2". Bob Carpenter did reface to a 0.100" and facing length of 23mm. He also slightly filled the tooth groove. Plastic mouthpiece with a Medium-Small chamber with flat sidewalls. Item:WWS00.00.9151.1-B45
Read More$99.00 - An less expensive option, Recently back from a refacing by Bob Carpenter to a .080". A great plastic composite mouthpiece that will give you semi-vintage tone that plays easy like a modern mouthpiece. Medium, walled chamber on this one. no ligature. Item:WSS00.00.811.1-B35
Read More$120.00 - A smooth playing tip size for jazz and focused tone. A baffle slope for more cut in the tone.
Read More$1,599.00 - An intermediate sax with the big brother as the SX90(pro model). These have a tone that is full of harmonics!
Read MoreSOLD - Fantastic price on a JK bari (to Bb) with a nice Protec case upgrade!
Read More$1989.00 - General Description: a great Bb Bari, with good ergos, some past damage wounds, missing pants guard. A Great sax to PLAY without worry on collector issues) A vintage 1958-60 original lacquer body with lacquer keys and the solid sheet keyguards and plastic pants guard(missing) (keilwerth indicators). Ser. #35K…
Read More$1,699.00 - Original finish Tone King alto. Excellent German build and JK lineage. It currently has no pads in it and will get those during the rebuild (ha!). original lacquer, nickel plated keys and the plastic pants guard is intact!
Read More$49.00 - stock Jupiter mouthpiece with round chamber, now with WWS Refacing Enhancements.
Read More$1,649.00 - REDUCED in 2025! - Yep. The bomb right here. Brecker style, and handmade greatness, # 5432 with "DG" on the front. Original tip @ 0.112".
Read More$45.00 - Plastic. Inquire for additional information. Item: WWSL4.7W6.12151.6-003
Read MoreSOLD - These are often called the "Transitional" model as they were after the brass era (BD and Stubby) and before the Silverite ("Miami, FL"). The original tip @ 0.112" was touched by another famous mouthpiece refacers. It plays as big and awesome as Sarge's did! (I put them side…
Read More$1,200.00 - SOUND FILES - Sarge's notes on this one: "Nickel silver plated brass (prototype to SPC or Dave Guardala), original tip D8, unfooled with--$1200." Original tip @ 0.113". It plays big and awesome! See the SOUND FILE.
Read More$675.00 - (please inquire) David Sanborn lovers need to contact me! Comes with original Box, Ligature and cap! It arrived needing minor work on the table and tip seal; I did that and play-tested it. Now a near-original tip @ 0.077". It is a free-blowing mouthpiece with booming altissimo. Inspected…
Read MoreSOLD - A uniquely, ultra rare Dukoff mouthpiece from Chadd's Collection that matches all the design measurements for a C-Melody mouthpiece. It was really tricky on arrival and it sent me into heavy research. The photo comparisons sum it up though. It contained elements from two eras of Dukoff: the…
Read More$325.00 - SOUND FILE - From Sarge's Collection - A rare Herbert Couf metal mouthpiece with gold plate, original ligature, and red, woodgrain tooth pad.
Read More$125.00 - Here's another great, hard rubber mouthpiece. As Bob says: "these are the good rubber...they even taste like it". Ha, dare I say, he's right. you can taste the quality rubber. (I hope my cleaners can also act as as sealer to the rubber--to help the playing experience away…
Read More$1,699.00 - An affordable 10M - Built like a tank! It's a Conn & 10M in tone but of course it doesn't quite compete with the saxes from the 1930s/40s (which will cost you $3000-5000).
Read MoreSOLD - An affordable 10M previously serviced by WWS; upgraded case! These are incredibly undervalued, yet are great for budget-friendly needs, backup horns, and strong metal.
Read MoreSOLD/ONHOLD $2,399.00 - A wonderful era 10M with rolled tone holes(RTH), and relacquered finish in excellent condition! Pads are older Conn Reso-Pads, and it plays!
Read MoreSOLD $1800.00 (Priced to go fast) - #285k, prior WWS rebuild from a few years ago but didn't receive much playing time. Finish: Original Lacquer. Comes with original Conn Case is good shape.
Read MoreSOLD! - An excellent, original lacquer example of a highly sought after sax. Serial #275k puts it right at 1936. This This horn was actually sold prior to arrival here because it was Scouted for a customer (a service that we offer). We located the sax from a client/collector in…
Read MoreSOLD - Rare Chu C-Mel! with new pads and new case, silver plated and goldwash bell. Includes Conn Eagle mouthpiece.
Read MoreSOLD - (AS IS) A lovely C-Mel with alto-style neck in ALL original white pads! Nickel in fantastic condition. Collector, Clean Quality.
Read More$2,599.00 - Gold body Conn with good pads, keyed to F, original case and includes Noblet mouthpiece.
Read More$139.00 - Paired with Conns from 1935-56, these had several options. The "No.5" (of the 6 sizes) was, according to Conn Loyalist: "A short facing with Medium-wide tip opening. The most popular all-purpose mouthpiece. Fine for solo work. Gives Larger Volume than Lay No.2." I find this entertaining because the…
Read MoreSOLD - Medium-medium/small, round chamber. Not a vintage large chamber. SOUND: It has bite & depth. It's wild; like Treble and Bass, not heavy in the Mids. Bob Carpenter opened it up to a 0.112".
Read More$80.00 - Rubber, arrived with a modified tip at 0.068" by some bozo. I think I can help it play great and improve cosmetically. INSPECTION REQUIRED (WWS refacing work) no ligature, on arrival. Ask me for extras if I can help with the ligature. used condition. Ask me to inspect/perfect…
Read More$119-489.00 - Protec Cases - Worldwide Sax is an Official Dealer/Distributor with Protec USA products. Our most often recommended items are the Protec XL Contoured Pro Pac as it can fit most all vintage sax models with LH bell keys for added safety (Conn, Martin, JK...) Get 10-30% Off with purchase…
Read More$899/1,780.00 - Underslung neck; Classic, big 400 bell flare; Lacquer body nickel keys; Original pads and snap in resos. the late era changed to stainless steel springs (not the screw in, gold versions). All snaps are present!
Read More$1899.00 - This is a nice 400 model made about a year after the Selmer takeover ser. # 420,xxx. The finish is original and to me, looks very handsome. It has the same body, neck with underslung octave mechanism and keywork as the famous older brother the "Top Hat" model,…
Read More$3,199 as is/$4,400 Rebuilt - SOUND FILE - Original finish with some signs of use and playing. Pretty enough to love, played enough to keep playing without stress.
Read More$3,199.00 - Original lacquer TH&C with a WWS Rebuild (2013) and minimal use! Original Case, Snap in pads & resos too!
Read More$2,995.00 - SALE! - like-new pads, Original finish, hard case. Minor repair mods help this be a "players horn" and it is priced to sell and enjoy!
Read More$1,199.00 - A sweet player with Big B tone in a dark, relacquer finish. Comes with a nice SKB case.
Read MoreSOLD - ***Restoration Photos!*** Boomer Sister #2: Named: "Bertha" of the Boomer sisters (two Bass saxes)...Serial# 145k, typical bumps and bruises. We found a case to pair with it. Although lacquer was more common around 1934, this technically looks like a [1st time lacquer] job.
Read MoreSOLD - Shop Name: "Mr. Brown". Overall, this bass in excellent condition! Serial# 40k, typical bumps and bruises. Comes with original case in good working order! Let's talk about how to help you make music with this beast.
Read More$149.00 - originally with the True Tone model sax, large chamber, 1920s mouthpiece with large chamber.
Read MoreON TRIAL $129.00 - Larger Chamber, hard rubber. With original, Buescher Ligature!
Read More$749.00 - (reface pending, order now!) A great pairing for any vintage baritone, or a bass sax, and will often help with intonation issues due to the large chamber.
Read MoreSigard Rascher Soprano hard rubber mpc. This one is a modern approach to the Buescher "pickles" from the 1920s. I must assume that this one is an early prototype because it has the "pickle" roll at the shank. the newest ones don't appear to have that. They even copied the…
Read More$189.00 - This one arrived on its deathbed. 🙁 but Bob is amazing; he saved it--tooth groove, tip repair and reface! Bob Carpenter refaced the tip to a 0.100" with a 23mm facing--"RAC". It is a longer facing that my normal so my embouchure had to adjust to this piece…
Read More$275.00 - These are always great. Wood-grain tooth pad in Excellent condition!! Original tip to a 0.082"! There are no cracks to mention. serial number is 6-digit 100K. It plays very easy and has a centered, Mid-Tone core to the tone. These have a medium chamber with shallow side walls.…
Read More$375.00 - From Sarge's Collection - extremely rare 1960s Level-Air in excellent condition, refaced to play, collect and/or enjoy!
Read MoreSALE $259.00 - Great era with crisp tone - Even Lester Young played on one for a time!
Read More$175.00 - vintage Brilhart with horizontal machining on the table. Clear, clean and focused jazz tone.
Read More$119.00 - Nice Brilhart with ser# that will get refacing enhancements to play crisp, clear and easy.
Read More$355.00 - A warm, free-blowing mouthpiece! WWS Refaced and ready to be a nice Jazz-tone addition to your collection.
Read MoreSALE $5,499.00 - SOUND FILE - Factory New - This is THE example of all the great German saxes that we've learned to love and respect - think also of the Dave Guardala DG500 models, but with the next tier of improvements! - G# lifter, Screw adjustments on the lower…
Read More$65.00 - A classy, wood end plug built for Alto sax.
Read MoreSOLD - Newer era Series II neck (black "S") that works great. Series 2 neck is "rounder, darker and warmer" than the brighter, more focused Series 3 neck.
Read More