SOLD - It's a nice jazz tone with a centered focus yet round warmth. Sounds like a mix of a Meyer crossed with Otto Link rubbers.
Read MoreMouthpiece Archive
For your viewing pleasure! These are achived items and all have happy homes.
Some Past (Sold) Mouthpieces
It is my goal to maintain a large list of some of the mouthpieces we've seen and worked on for research reasons. I hope that we'll be able to develop this section for the necessary Sound Files that belong with each mouthpiece. Enjoy!
Bari ‘Rubber 64’ Soprano, HR – 0.066″ (Archived)
SOLD - Rubber BARI mouthpiece with larger tip size and round chamber.
Read MoreBerg Larsen ‘100-1-M(offset)’ Tenor, 1950/60s Duckbill – 0.100″ (Archived)
SOLD - vintage Berg mouthpiece with denim table. Classic sound and pure fun!
Read MoreBerg Larsen ‘100-2-M(offset)’ Tenor, 1960s Scoopbill (RAC) – 0.107″ (Archived)
SOLD - Repaired tip to 0.107". Tip seal was saved by Bob C to a more desired [0.107"]. With modern Berg ligature (fits a little loose). There's more room for me to inspect and discuss this mouthpiece with you. Please inquire.
Read MoreBerg Larsen ‘100-3-M’ Tenor, 2000s Bronze (Gold Series), (RAC) – 0.107″ (Archived)
SOLD - Bob's Collection: Marked [100-3-M], this mouthpiece was enhanced to play better by mouthpiece guru Bob Carpenter. Even some of the great Bergs don't leave the factory playing very well. The "3" baffle does limit the treble (darkest setting), and you'll notice that it still contains the medium-core tone…
Read MoreBerg Larsen ‘100-3-M(offset)’ Tenor, 1950s/60s Duckbill Rubber (Archived)
$SOLD - a superb mouthpiece. It reminds me of my frequent flyer. good material, and a near original tip, had slight enhancements done here at WWS, is at 0.095" , table markings were worked off prior to WWS (but trust the Offset M for the era). Bullet chamber is there,…
Read MoreBerg Larsen ‘105-2-SMS’ Alto, Metal (Archived)
Sold - Stainless, #105 (!!!), but wait, it arrived with tip at 0.091". original ligature and cap.
Read MoreBerg Larsen ‘105-2-SMS’ Tenor, 2000s Grained Ebonite, (WWS) – 0.108″ (Archived)
STASHED - Bob's Collection - One amazing example! You'll love it. Marked [105-2-SMS], this mouthpiece was enhanced by me. ***I made as much of a copy on the facing curve as I could to my personal 110-2-SMS, vintage rubber ($450) Berg. I have had serious thoughts about buying this from…
Read MoreBerg Larsen ‘105-2-SMS’ Tenor, 2000s Rubber, (WWS Reface) – 0.108″ (Archived)
SOLD - (Compare to $284 New) - Inspected and refaced to better specs, here's a modern Berg with a big sound!
Read MoreBerg Larsen ‘110-0-M (offset)’ Alto, Straightbill Stainless – 0.104″ (Archived)
SOLD - Rare Berg with a HUGE tip! With original ligature and box! Collector potential. A 30% larger tip is not for everyone - is it for you?
Read MoreBerg Larsen ‘110-0-M’ Tenor, 1970s Straightbill – 0.112″ (Archived)
SOLD - SOUND FILE - Come quick! Nice Berg with a desired tip. Bullet chamber and huge tone; horizontal table markings make it from the 70s/80s.
Read MoreBerg Larsen ‘110-0-SMS’ Tenor, 2000s Rubber, (WWS Reface) – 0.106″ (Archived)
SOLD - Inspected and refaced to better specs, (compare to $284 New) here's a modern Berg with an unusually very dark, luscious sound.
Read MoreBerg Larsen ‘110-2-x’ Tenor, 1940s Duckbill, Boat tail, (RAC reface)- 0.105″ (Archived)
SOLD - SOUND FILE - Saved by Bob Carpenter (due to a poor refacer), this is one of the rarest of the rare Bergs and it comes with original brass ligature and cap! It was messed up arriving at an unplayable 0.080" but Bob brought it back up to 105!…
Read MoreBerg Larsen ‘120-2-M(offset)’ Tenor, 1960s Scoopbill (WWS Repair)- 0.118″ (Archived)
SOLD - Tip seal was enhanced here at WWS for very minimal change [near original tip at 0.118"]. With original ligature and cap.
Read MoreBerg Larsen ‘120-2-SMS – SELECT’ Tenor, 1970-80s Rubber – 0.115″ (Archived)
SOLD - A super rare, 'SELECT' model Berg Larsen mouthpiece from the 1970s/80s. It has a straight signature, very offset SMS marks, the 'Select' label on the shank, bullet chamber and horizontal table markings. NOTE: I can now say that even a "Select" mouthpiece can need repair. This is one…
Read MoreBerg Larsen ‘130-1-M (offset)’ Tenor, Straightbill Stainless, (Refaced)- 0.119″ (Archived)
SOLD - A loved and sought Berg 130 with the "M" offset); WWS Enhanced tip seal reface - Free blowing at 0.119! with original ligature and cap.
Read MoreBerg Larsen ’80-3-M’ Alto, 1970s (refaced) Scoopbill Stainless (Archived)
SOLD - A 1970s era Scoopbill with dropoff chamber & made of Stainless Steel. This one arrived after being altered to sub-par standards. You can barely see the curved machine marks on the table that go left to right. Just back from Bob Carpenter who repaired it back to a…
Read MoreBerg Larsen ’90-1-M (offset)’ Alto, Vintage Straightbill Stainless (Archived)
SOLD - This is original at 90-1-M (with the M off to the right, which is older style than the centered facing length markings). The Tip measures a common 0.087" for a Berg 90; plays loud, has a fat tone with a strong treble presence(loud/bright). It comes with the original…
Read MoreBerg Larsen ’90-2-SMS(offset)’ Tenor, 1940s Very Vintage – 0.086″ (Archived)
SOLD - A rare 1940s Berg stainless steel, metal Tenor mouthpiece with original brass ligature and cap. Smaller, easy blowing tips size, short facing length.
Read MoreBerg Larsen ‘look-alike’ Baritone – 0.098″ (Archived)
SOLD - Here is a rare Berg-like, a 1940-60s, bullet berg...?... Bob Carpenter says that these often didn't get stamped. There is a "5" marking on the side though, so it could be a stencil, similar to a late boattail. Tip measures @ 0.098"...But I will have to clean it…
Read MoreBerg Larsen ‘look-alike’ Baritone – 0.100″ (Archived)
SOLD - Here is a rare Berg-like, a 1940-60s, bullet berg...?... Bob Carpenter says that these often didn't get stamped. There is a "5" marking on the side though, so it could be a stencil, similar to a late boattail. Tip measures @ 0.100". This is a very nice player,…
Read MoreBrilhart ‘Designed by Arnold Brilhart, Great Neck NY – #1’ Tenor, (RAC Reface) – 0.090″ (Archived)
SOLD - SOUND FILE - Looking for an early Otto Link for half the price!? This is your best option! A research piece!: Serial Number 8803 currently not tracked on Theo Wanne mouthpiece info pages - This mouthpiece may be one of the later ones made (1942+). According to Wanne's…
Read MoreBrilhart ‘Designed by Arnold Brilhart, Great Neck NY – #3’ Tenor, Streamline – 0.079″ (Archived)
SOLD - Rare Streamline (thinner) model with in fantastic condition. With AB ligature. Great for the player with alto embouchure; but really for the collector
Read MoreBrilhart ‘Ebolin 3*’ Tenor, No Ser# – 0.074″ (2 of 2) (Archived)
SOLD - vintage plastic mouthpiece with good material; no serial number keeps the price lower!. The original tip is at 0.074" , vertical table markings. side-walled chamber and a true Brilhart-tonalin-ebolin sound = clean, simple, warm. Less cut in the tone. Comes with a New nickel ligature.
Read MoreBrilhart ‘Ebolin 3*’ Tenor, 1950s Ser# 58860 (Archived)
SOLD - Low ser # 58860 in very good shape, with serial number. Feels like a 1955 era, plays strong and a little bright, but warms up with a La Voz "jazz" reed. Original tip size 0.080".
Read MoreBrilhart ‘Ebolin 3*’ Tenor, 1970s No Ser# – 0.069″ (Archived)
SOLD - vintage plastic mouthpiece with good material; no serial number keeps the price lower!. The original tip is at 0.069" , vertical table markings. side-walled chamber and a true Brilhart-tonalin-ebolin sound = clean, simple, warm. Less cut in the tone. Item: WWSL4.7W6.12151.6-004
Read MoreBrilhart ‘Ebolin 3*’ Tenor, No Ser# – 0.074″ (Archived)
SOLD- vintage plastic mouthpiece with good material; no serial number keeps the price lower!. The original tip is at 0.074" , vertical table markings. side-walled chamber and a true Brilhart-tonalin-ebolin sound = clean, simple, warm. Less cut in the tone. Comes with a New nickel ligature.
Read MoreBrilhart ‘Ebolin 4’ Tenor, 1950s Ser# 83039 (Archived)
SOLD - This is an Ebolin with a nice, early 5-digit ser#83,039. Original facing tip at 0.084". This one plays very strong with the characteristic Brilhart sound--medium chamber with flat side walls. Looking for a Tonalin sound, without the Tonalin price?! ...This is a great option! a bit more presence…
Read MoreBrilhart ‘Ebolin 4’ Tenor, 1967 Ser# 022867 (Archived)
SOLD- This is an Ebolin with the white tooth pad, with a later 6-digit ser# 022867. NEAR Original facing tip at 0.087". ***tip will need me to Enhance the seal, and slightly level the Table for optimum seal (INCLUDED IN PURCHASE)*** This one will play very strong with the characteristic…
Read MoreBrilhart ‘Ebolin 5*’ Baritone, 1970s No Ser# – 0.084″ (Archived)
SOLD - Rare Brilhart baritone mouthpiece. These have a clean, focused tone and often have less resistance due to smaller tip sizes.
Read MoreBrilhart ‘Hard Rubber – #3’ Tenor, Ser# 151128 (RAC reface)- 0.097″ (Archived)
$SOLD - These are one of the best Hard Rubber Mouthpieces ever made. We got it as an altered #5 tip and I had to help it get closer to perfection... There is proof of tooth groove being filled in; I've put a Runyon clear patch on it. These have…
Read MoreBrilhart ‘Hard Rubber – #3*’ Tenor, Ser# 122576 (RAC Reface) – 0.105″ (Archived)
SOLD - Sound File - These are one of the best Hard Rubber Mouthpieces ever made. These have a a Nice big sound, medium tone, not too dark, not too bright, Sarge had THREE in his collection for a while-- It's "best of" material! serial number 122576. Bob Carpenter reface…
Read MoreBrilhart ‘Hard Rubber- #4’ Tenor, Ser# 116669 (RAC reface)- 0.102″ (Archived)
SOLD - These are one of the best Hard Rubber Mouthpieces ever made. These have a a Nice big sound, medium tone, not too dark, not too bright, Sarge had THREE in his collection for a while-- It's "best of" material! serial number 116,669; WITH ORIGINAL BOX! Bob Carpenter reface…
Read MoreBrilhart ‘Hard Rubber- #6’ Tenor, Ser# 013167 (RAC reface)- 0.103″ (Archived)
SOLD - These are one of the best Hard Rubber Mouthpieces ever made. We got it as an altered #6 tip and I'll have Bob Carpenter open it up to perfection... There was a minor tooth groove I had Bob fix also. These have a a Nice big sound, medium…
Read MoreBrilhart ‘Level Air #7 < #9' Tenor, 2000s, (RAC) - 0.110" (Archvied)
SOLD - This is one of my favorite mouthpieces of the modern makers! (my bias is toward a #7 tip). This was repaired/refaced by master refacer Bob Carpenter. All repairs were silver plated to seal them. Although you can get these new for a little less money, this one was…
Read MoreBrilhart ‘Level-Air 10*’ Tenor, 1960s Ser# 8453 (WWS) – 0.110″ (Archived)
SOLD - A very rare #10*!!! with a 4-digit ser#: 8453, with horizontal machining mark on the table (prior to repairs) dates it to the early era of the 1960s. It arrived with an unlevel table and tip, however, It was worked on here at WWS. Although it seems a…
Read MoreBrilhart ‘Level-Air 5’ Tenor, 1960s Ser# 10749 – 0.090″ (Archived)
SOLD - This mpc is a nice free blowing mpc with a tip measuring 0.090". Ser # 10749 There was a small tooth imprint that Bob C repaired. I may cover the bite pad with a clear bite tab--typically needed on these mouthpieces. It blows a big sound with heavy…
Read MoreBrilhart ‘Level-Air 5’ Tenor, 1960s Ser# 3262 – 0.098″ (Archived)
SOLD - stainless steel mouthpiece, original tip, ligature and cap! These have a following for a reason. 098 is a nice tip size worth your consideration!
Read MoreBrilhart ‘Level-Air 5’ Tenor, 1960s Ser# 4371 – 0.093″ (Archived)
SOLD- This mpc is a nice free blowing mpc with a tip measuring 0.092" (not normal for a " 5 " ). Ser # 4371 There is a small tooth imprint that I covered with a clear bite tab--typical on these. It blows a big sound with heavy mid tones…
Read MoreBrilhart ‘Level-Air 5’ Tenor, 1960s Ser# 8396 – 0.093″(Archived)
SOLD - Nice Level-Air model with a fun tip size. Having the original ligature is a big deal. This one also has the original cap.
Read MoreBrilhart ‘Level-Air 5*’ Alto, 1974 Stainless
SOLD - This is a very nice, free blowing mpc -- tooth pad repaired in the past, and has two newer tooth marks on the top that I could easily cover up with a clear pad (remind me). It blows a big sound with heavy mid tones for a metal,…
Read MoreBrilhart ‘Level-Air 5*’ Tenor, 1971 Ser# 91071 (Archived)
Sold - This mpc is a nice free blowing mpc with a tip measuring 0.095". Ser # 91071 It blows a big sound with heavy mid tones for a metal, cliff-style baffle. Denim marks on the table. Currently no ligature.
Read MoreBrilhart ‘Level-Air 5*’ Tenor, 1973 Ser#73,173 – 0.089″(Archived)
SOLD - This mpc is a nice free blowing mpc with a tip measuring 0.089". Tooth pad in excellent shape. It blows easy and with a big sound with heavy mid tones for a metal, cliff-style baffle. Vertical denim table marks date it to the 70s as well. These are…
Read MoreBrilhart ‘Personaline L3’ Tenor, 1960s Ser# 189662 (RAC reface)- 0.096″ (Archived)
SOLD - From Sarge's Collection - Don't let the black plastic material fool you. These are well respected.
Read MoreBrilhart ‘Personaline L4’ Tenor, 1950s, Ser# (RAC reface) – 0.090″ (Archived)
SOLD - SOUND FILE - Don't let the black plastic material fool you. Mouthpiece with the Circle wood-grain tooth pad. Bob Carpenter did the minor perfection of the reface to a 0.090" and facing length of 22mm. He also filled the tooth groove. As usual, Bob's work looks excellent! 4-digit!…
Read MoreBrilhart ‘Personaline S4’ Tenor, Rubber 0.077″ (Archived)
SOLD - A great mouthpiece with quality hard rubber from the golden era. no serial number, no special tooth pad. It arrived with a near Original tip at 0.077". Let's talk about making a Reface happen to your liking! Please ask me about a ligature if you need one. Description:…
Read MoreBrilhart ‘Personaline S5’ Tenor, Rubber – 0.084″ (Archived)
Sold! - SUPER GEM! A great mouthpiece with quality hard rubber from the golden era. no serial number. It arrived with a near Original tip at 0.084". Let's talk about making a Reface happen to your liking! Please ask me about a ligature if you need one. Early Description: "…
Read MoreBrilhart ‘Personaline S6’ Tenor, Rubber (RAC reface)- 0.105″(Archived)
SOLD - SUPER GEM! black hard rubber, Bob Carpenter did the minor perfection of the reface to a 0.105. As usual, Bob's work looks excellent! The sound is a warm-round, with semi-clean clarity -- truly a blend of sounds and why these are well loved. Description: " a [Long "E"],…
Read MoreBrilhart ‘Tonalin 2*’ Alto, 1970s (WWS refaced) – 0.073″ (Archived)
SOLD - no serial #. I had Bob C fill in the tooth pad, It had a larger tip than expected on arrival, It received some altering here enough to call it a "Refaced" example. WWS Reface: 0.072". SOUND: reserved-vintage tone. clearer tones up high allow treble to return, minor-subdued…
Read MoreBrilhart ‘Tonalin 4*’ Alto, 1968-69 – 0.073″ (Archived)
SOLD - 1968-69 no serial #. Tip at 0.073". I happen to know a little history from this mouthpiece's journey to be able to date it. Although no serial #, I happen to know what horn the fellow was playing. If I link these two eras, they both line up…
Read MoreBrilhart ‘Tonalin 4*’ Tenor, 1940s – 0.094″ (Archived)
SOLD - Plays excellent - huge 1940s tip - It measures near a modern "6*" at 0.094" and due to the table marking and the tip material, I can't see how this wasn't original.
Read MoreBrilhart ‘Tonalin 5 – Custom 8’ Tenor, 1946-51 Ser# 87942 (RAC reface) – 0.098″ (Archived)
SOLD - what a fun mouthpiece. Bob Carpenter refaced the tip to a 0.098". It has a long facing. I also had Bob patch a tooth groove. I have since installed a black foam tooth cushion. This has a much larger presence to the tone and a big sound. There…
Read MoreBrilhart ‘Tonalin 5’ Tenor, early 50s Ser# 37945 (Archived)
SOLD - with script in beautiful condition. FIVE DIGIT SERIAL NUMBER! This one plays really nice with decent focus for a Tonalin. I'm biased, but I love these. A good smooth Stan Getz type sound. Original Tip size at 0.085", no tooth grooves. no ligature. There are two crack evidences,…
Read MoreBrilhart ‘Tonalin Streamline – 5*’ Tenor, 1943, Ser# – 0.100″ (Archived)
SOLD - Unique sound - A rare, fun Streamline with near-original tip at 0.100" from the early 1940s! It has a very unique sound that fits classic jazz perfectly.
Read MoreBrilhart ‘Tonalin, Great Neck NY – 2’ Tenor, 1940s (Refaced)- 0.073″ (Archived)
SOLD - Looking for a budget mouthpiece? This might be the one (Good repairs, longer life). Plays pretty nice! Great Necks are so cool. They really have an 'it factor' compared to a few mouthpieces. They have a slightly different core tone and response. These are from the 1940s! It…
Read MoreBrilhart ‘Velvet Brass #4’ Tenor, (RAC Reface) – 0.099″(Archived)
SOLD - SOUND FILE - From Sarge's Collection! - Just Special. An ultra rare Brilhart mouthpiece with Original ligature! Recently released to be listed "for sale" from Sarge's Collection. This mouthpiece has serial # M1029 on it. Item#: SSPestate00.00.11201.7-BC-002
Read MoreBuescher ‘Pickle – Emblem’ Soprano, 1920s (RAC Reface) – 0.059″ (Archived)
Hard rubber mpc. Buescher from the 1920s. Bob Carpenter did work on this one in conjunction with myself, and now it's a Tip size @ 0.059 with 18mm facing length. This one did have a sneaky crack up the beak. Bob will glued that back together and I'll discount the…
Read MoreBuescher ‘Pickle “Emblem”‘ Alto, 1910s/20s (refaced) – 0.069”
SOLD - $99.00 - Vintage hard rubber from 1920s(perhaps earlier). It has been refaced (elsewhere?) to tip size @ about 0.064". I THINK THIS COULD BE A SWEET SWEET PLAYER! It has a very large Chamber and that traditional 1920s stuffy tone but add in the high tones from the…
Read MoreBuescher ‘Pickle “TrueTone”‘ Alto, 1920s Tru-Lay 55/812/M – 0.054” (Archived)
SOLD - Vintage hard rubber from 1920s. It has the original tip size @ about 0.054". It will play nicer with a Lavoz Medium, and poorly with a 2.5 reed so stick to #3 or greater. It has a very large Chamber and that traditional 1920s stuffy tone, narrow beak.…
Read MoreBuescher ‘Pickle #2’ Alto, 1920s Hard Rubber – 0.055″(Archived)
SOLD - vintage early 1920s from a TrueTone, markings of "2", tip looks original, tip @ 0.055" and it plays stuffy, like the traditional sound it had with the Buescher True Tones. Stiff reeds needed. sorry, no ligature currently.
Read MoreBuescher ‘Sigard Rascher’ Baritone, Rubber – 0.087″ (Archived)
SOLD - Refaced! - Large chamber mouthpiece - A modern copy of the vintage True Tone "pickle" baritone mouthpieces. These are branded with Sigard's name.
Read MoreBuescher ‘True Tone USA’ Alto, 1930/40s, Tru Lay – 0.057″(Archived)
SOLD - later era Buescher TT, large chamber, vintage hard rubber with a pro's stamp of approval. Classical music slayer.
Read MoreBuescher ‘True Tone USA’ Tenor, 1930/40s (WWS refaced) – 0.081″ (Archived)
SOLD - A huge, large chamber mouthpiece with a very mellow tone. Less trebles are present in the timbre - try your low end and the walls resonant in a unique way. The label markings are less deep and have a look that causes me to believe this is from…
Read MoreBuescher ‘True Tone,”Emblem”‘ Alto, 1920s (WWS refaced) – 0.074″ (Archived)
SOLD - Original Markings on the table were "63/30M 5/27" WWS REFACE 0.074" . Large Chamber.
Read MoreBuescher ‘True Tone’ Baritone, 1920s – 0.073″ (Archived)
SOLD - Large chamber mouthpiece from the 1920s/30s. These are in high demand for vintage baritones to help even out the intonation issues.
Read MoreBuescher ‘TrueTone USA’ Baritone, 1930s/40s (RAC reface)- 0.090″ (Archived)
SOLD - (non-pickle) Here is a very cool large chamber mouthpiece. It arrived in original tip so I just sent it off to Bob Carpenter to get it more modernized for Classical Music at 0.090" (for reference C* = 0.080"). It has very minor teeth scratches and the tip and…
Read MoreBuescher ‘TrueTone’ Alto, 1940s/50s – (WWS reface) – 0.068″ (Archived)
SOLD - Vintage hard rubber from 1940s/50s...it has a large window for the reed! cool! Also the large large chamber and I enhanced the tip up to 0.068". It plays really easy. I would say it sounds typical of a stuffy, vintage tone. no ligature, sorry. Item:WWS0S0.2121.4-0GMZ3
Read MoreBuescher ‘Whitehall’ Baritone, 1940s (WWS Reface) – 0.102″ (Archived)
SOLD - Custom Reface! + Large chamber! - A vintage hard rubber mouthpiece that is a copy of a vintage Buescher that I would approximate from the 1940s. This one had a large chamber and the original tip (needing some minor seal help) at 0.074" on arrival. Now it measures…
Read MoreBuffet ‘Buffet Crampon – 4’ Alto, 1940s Rubber – 0.068″ (Archived)
SOLD - A rare, rubber Buffet mouthpiece. Baffle and chamber design support a "clean, French, Classical" tone. It's slightly smaller than "medium" as it enters the throat.
Read MoreClaude Lakey ‘5*’ Soprano, (WWS reface)- 0.073″ (Archived)
SOLD - Rubber, arrived with an original tip at 0.065". I know I can help it play great and improve its response. INSPECTION REQUIRED (WWS refacing work - level table, clean up the tip seal) no ligature, on arrival.
Read MoreClaude Lakey ‘8*’ Soprano, (WWS reface)- 0.076″ (Archived)
SOLD - Rubber, arrived with original tip at 0.076". no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. Ask me to inspect/perfect the tip seal. I WILL NEED TO DO THIS. Item #:WWS3S7.34.441.6-006
Read MoreClaude Lakey ‘JAZZ – 7*3’ Tenor, Modern – 0.110″ (Archived)
$79.00 - Used Lakey that plays great - it arrived with original tip at 0.110" but I could feel a small resistance that prompted an inspection and small enhancement to the facing. PLAYS BIG, BOLD, Free Blowing.
Read MoreClaude Lakey ‘JAZZ-5*3’ Alto, Modern (Archived)
SOLD - Arrival Tip at 074"~. I just finished refacing it (photos above are before work; that was a bozo's work/mutilation.) It plays LOUD, bright, clear, with a finished tip at 0.071". Item: WWSL4.7W6.12151.6-C25-019
Read MoreConn ‘”Precision”‘ Baritone, Slimline (RAC reface)- 0.095″ (Archived)
SOLD - Hard Rubber, Bob Carpenter reface Tip at 0.095" with a 25mm facing length. (compare to a Selmer C* at 0.080), These are nice focused jazz/rock mouthpieces. Sorry, no ligature(yet). Item #: WWS19.00.951.5-0B40
Read MoreConn ‘”Standard Steelay” #5’ Baritone, 1930s – 0.082″ (Archived)
SOLD- a great large chamber, hard rubber mouthpiece from the golden era. It arrived with a near Original tip at 0.082". Let's talk about making a Reface happen to your liking! Item #:WWS8E5.2291.6-C0
Read MoreConn ‘Connstellation #3’ Soprano – 0.055″ (Archived)
here's a hard to find mpc from the late 60s, These were made with facings 1(closed) -- 6(open) but only three sizes for Soprano--2, 3, 4. This with the original tip at 0.055", tip and rails in great shape. there is one minor mark in the table(minor), the table shows…
Read MoreConn ‘Eagle’ Alto, 1920s/30s (RAC refaced) – 0.080″ (Archived)
Sold - Vintage hard rubber from 1920/30s. Originally it was paired with a New Wonder . It has a large Chamber and I just had Bob Carpenter open it up to 0.080". It plays really easy. I would say it sounds typical of a stuffy, vintage tone but after Bob's…
Read MoreConn ‘Eagle’ Alto, 1930s (RAC refaced) – 0.079″ (Archived)
SOLD - Recently back from a refacing by Bob Carpenter to a 0.079" with a 19mm facing. Bob marked his etching on the table too ("RAC")! A great hard rubber mouthpiece that will give you a warm full sound--It would have been originally paired with a Conn Chu. A large…
Read MoreConn ‘Eagle’ Baritone, 1920s – 0.062″ (Archived)
SOLD - The original tip is 0.062" right now. Large chamber. Notice the lower walls cutout for comfort - cool! A great large chamber mouthpiece made of hard rubber mouthpiece from the golden era. If you want it closer to original with minor inspections and enhancements, the price will be…
Read MoreConn ‘Eagle’ Baritone, 1920s (RAC reface) – 0.104″ (Archived)
SOLD - (My main recommendation for Bass Saxes) a great large chamber mouthpiece made of hard rubber mouthpiece from the golden era. The original tip was refaced by Bob. Notice the lower walls cutout for comfort - cool!
Read MoreConn ‘Eagle’ Soprano, (RAC Reface) – 0.067″ (Archived)
Here is a rare and sought after Conn Eagle mouthpiece. It arrived with an original tip at 0.044" but was damaged with a chip. So I will send it off to Bob Carpenter to save it and make it play excellent. It just arrived and is @ 0.067". It has…
Read MoreConn ‘Eagle’ Soprano, 1920s – 0.051″(Archived)
SOLD - Buy it as is or have it refaced - A sought after Conn Eagle mouthpiece. It arrived with an original tip at 0.051". It has a small shank repair that barely shows. It has a large chamber that often helps intonation needs on old sopranos.
Read MoreConn ‘look-alike’ Baritone, 1920s/30s (RAC reface)- 0.112″(Archived)
SOLD - Medium-medium/small, round chamber. Not a vintage large chamber. SOUND: It has bite & depth. It's wild; like Treble and Bass, not heavy in the Mids. Bob Carpenter opened it up to a 0.112".
Read MoreConn ‘Pan-American’ Alto, 1930s (RAC refaced) – 0.071″ (Archived)
SOLD - Vintage hard rubber from 1930s. It has a large Chamber and I just had Bob Carpenter open it up to 0.071". It plays really easy. I would say it sounds typical of a stuffy, vintage tone but after Bob's work, it can cut through in the high register--still…
Read MoreConn ‘Standard “Steelay”‘ Alto, 1930s (Archived)
SOLD - Vintage hard rubber from 1930s. COOL! a "U.S. Navy" engraved side wall! It has a large Chamber and Original Tip @ 0.054" -- Let's reface that! I would say it sounds typical of a stuffy, vintage tone but after Item:WWSL19.00.5241.4-28
Read MoreConn ‘Stubby/shorty’ Soprano – 0.044″ (Archived)
often seen with early era Conn Wonders, it has the original tip at 0.044", a very large round chamber and is made of hard rubber. plays really nice with a reserved tone(small tip) with nasally attributes. Fun for the quiet player. Item: WWS0.00.8141.1-0
Read MoreCouf ‘5*’ Soprano, plastic – 0.053″ (Archived)
SOLD - Hard to find H.Couf mouthpiece for soprano with original ligature!
Read MoreCouf ‘Artist [6 star] ****** ‘ Tenor, 1960s/70s Rubber (Archived)
SOLD - From Sarge's Collection: One with "it factor" - Another great, hard rubber mouthpiece. It arrived with original tip at 0.088". Medium round chamber, currently with no baffle. This has a very slim look. GREAT POWER, focus and free-blowing! Comes with brass "Couf" ligature!
Read MoreCouf ‘Artist 4*R’ Alto, 1980s Rubber – 0.078″ (Archived)
SOLD - A modern era Couf mouthpiece set. Still made of great, hard rubber it has a side walls into a medium chamber.
Read MoreCouf ‘Special “4*”‘ Tenor, 1970s – 0.084” (Archived)
SOLD - These can be great players. Email for more information. Item: WWSL4.7W6.12151.6-013
Read MoreCouf ‘Special 4*’ Tenor, 1970s (WWS reface)- 0.085″ (Archived)
SOLD - There's a great playing, hard plastic mouthpiece. free blowing tip I refaced it to 0.085"! It has slight, rollover baffle at the tip (from reface), and slight, gradual sidewalls in the chamber. HUGE TONE!
Read MoreDukoff ‘D5 – Miami, FL’ Soprano – 0.060″ (Archived)
typical smooth jazz sound, loud like a Dukoff, high step-slope baffle too. Tip size at original about 0.060". Near a Kenny G sound but he played on a D8. We also installed a clear tooth pad for your comfort and the mouthpiece's protection--There were small teeth marks started. Comes with…
Read MoreDukoff ‘D6 – Miami, FL’ Tenor – 0.092″ (Archived)
SOLD - A great playing Dukoff D6 that plays big and easy. These play like lasers, cutting and piercing. Designed for R&R and battles with electric guitarists. Comes with original Box and Ligature! - replacement, aluminum cap included.
Read MoreDukoff ‘D6 – Silverite’ C-Melody, Transitional, (WWS Reface) – 0.071″ (Archived)
SOLD - A uniquely, ultra rare Dukoff mouthpiece from Chadd's Collection that matches all the design measurements for a C-Melody mouthpiece. It was really tricky on arrival and it sent me into heavy research. The photo comparisons sum it up though. It contained elements from two eras of Dukoff: the…
Read MoreDukoff ‘D7- Miami, FL’ Alto, 1970s, original box – 0.077″
$675.00 - (please inquire) David Sanborn lovers need to contact me! Comes with original Box, Ligature and cap! It arrived needing minor work on the table and tip seal; I did that and play-tested it. Now a near-original tip @ 0.077". It is a free-blowing mouthpiece with booming altissimo. Inspected…
Read MoreDukoff ‘D8 – Miami, FL’ Alto, (RAC Reface)- 0.087″ (Archived)
SOLD - A rare dukoff "Miami" (the one you want), and finessed tip to 0.087" by Bob Carpenter. From Bob's Collection. Comes with a brilhart level-air ligature and cap (a great substitute). You don't see an "8" come for sale very often. Item: ConsignBCarpenter
Read MoreDukoff ‘D8 – Nickel Plated Brass’ Tenor – 0.113″
$1,200.00 - SOUND FILES - Sarge's notes on this one: "Nickel silver plated brass (prototype to SPC or Dave Guardala), original tip D8, unfooled with--$1200." Original tip @ 0.113". It plays big and awesome! See the SOUND FILE.
Read MoreDukoff ‘D8 – Nickel Plated Brass’ Tenor, Ser# – 0.112″ (Archived)
SOLD - These are often called the "Transitional" model as they were after the brass era (BD and Stubby) and before the Silverite ("Miami, FL"). The original tip @ 0.112" was touched by another famous mouthpiece refacers. It plays as big and awesome as Sarge's did! (I put them side…
Read MoreDukoff ‘D8 – Silverite’ Soprano, modern – 0.074″ (Archived)
SOLD - arrived with original tip at 0.074". no ligature, on arrival. comes with Dukoff cap. Ask me for extras if I can help with the ligature. used condition--It will shine up nicely! These are well-loved and have a nice clean tone. Item: WWS3S7.34.441.6-017
Read MoreDukoff ‘Hollywood “BD” #7’ Tenor, 1945 Series 1 Silver, Ser# 637, (WWS reface)- 0.096″ (Archived)
SOLD - silver plated brass, Serial #634, beautiful tone. It arrived with silver separating on the table and the corner tip has a bad seal, also a tooth groove that I had Bob Carpenter fill in to repair. It walked in Original at 0.093", but the repairs were required. I…
Read MoreGeo M. Bundy ‘#2’ Alto, (WWS refaced) – 0.079″, Round Chamber (Archived)
SOLD - (touched up after photos) I refaced tip at 0.079" to copy my "Selmer NY" mouthpiece's curve ($299 listed below)! These are similar to 40's otto link in tone and much cheaper! Slant Bundy signature, no size walls. round, open chamber! These early ones with the open chamber are…
Read MoreGeo M. Bundy ‘#3’ Alto – 0.072″(Archived)
SOLD - Original tip at 0.072", looks good just that vintage-green rubber look. very minor nicks in the tip that are NOT affecting the seal. These are similar to 40's otto link in tone and much cheaper! currently no ligature, sorry. Chamber with size walls.
Read MoreGeo M. Bundy ‘#3’ Alto, Rubber – 0.064″ (Archived)
SOLD - original tip at 0.064", looks good just that vintage-green rubber look. very minor nick way up the tooth pad--not near the playing areas. These are similar to 40's otto link in tone and much cheaper! Chamber with size walls. Comes with brass ligature and brass cap. WWS30.00.6201.3-0
Read MoreGeo M. Bundy ‘Paris – B*’ Alto, 1930s – 0.057″
SOLD - Vintage, rubber Geo M Bundy mouthpiece with a very large chamber - Likely paired with the early Bundy saxes that were a Conn Pan-Am/6M spin off. So I'm not surprised that this mouthpiece reminds me of a Conn Eagle mouthpiece with the huge chamber. It's currently in the…
Read MoreGoldbeck ‘”Makers” #3’ Alto, 1920s – 0.051″ (Archived)
SOLD - These are 1920s vintage mouthpieces with a dark tubby tone, from a large chamber. They have fluted sidewalls on the exterior that had special ligatures (very hard to find)--the got lost, bummer. Their design and sound is very similar to the early Otto Link Master models. The composite…
Read MoreGoldbeck ‘”Superb” #2’ Alto, 1920s (refaced)- 0.065″ (Archived)
SOLD - These are 1920s vintage mouthpieces with a dark tubby tone, from a large chamber. They have fluted sidewalls on the exterior that had special ligatures (very hard to find)--the got lost, bummer. Their design and sound is very similar to the early Otto Link Master models. The composite…
Read MoreGoldbeck & Co. ‘”Superb” #3’ Tenor, 1920s (WWS reface)- 0.092″ (Archived)
SOLD - Nickel plated brass (nickel-silver, some say). These are great mouthpieces! Just refaced here at WWS to 0.092". It is a HUGE large chamber with a huge tone. I left a slight roll-over baffle to add some clarity. it is Classic Jazz all the way. The last one made…
Read MoreGregory ‘Los Angeles – 5A 20’ Tenor, 1940s/50s, Ser#9988, Fiber Resin (Archived)
$SOLD - SOUND: Focused warmth and slight edge--from flat sidewalls into round chamber(throat). "Rico Products LTD Distributors" + "Model A". These have a shallow beak that allows the mouthpiece to vibrate freely like Gregorys are known for. TIP arrived measuring very much original 0.078". However, when I look at it,…
Read MoreGregory ‘Model B, 4A 18’ Tenor, 1940s(+/-) Ser# 6265 (Archived)
SOLD - Original tip measures 0.065". The brother to the Model A (Paul Desmond on alto), the Model B is quite different. It is a slimmer design (pictures) and the chamber has flat sidewalls--not a round exit like the Model A. In tone, it is more focused with more reedy…
Read MoreGuardala ‘DG Studio’ Tenor – 0.115″ (Archived)
SOLD - SOUND FILES - Yep. The Bomb right here. The handmade greatness. The sound is awesome; made to mimic King Curtis--Sarge's favorite--there is a high baffle and cutout. The Brecker handmade model screams! Very bright with strong power and depth, super free blowing.
Read MoreGuardala ‘DG Studio’ Tenor, Ser#5432 – 0.112″
$1,899.00 - REDUCED! - Yep. The bomb right here. Brecker style, and handmade greatness, # 5432 with "DG" on the front. Original tip @ 0.112".
Read MoreGuardala ‘DG Studio’ Tenor, Ser#5496 – 0.111″ (Archived)
SOLD - Yep. The Bomb right here. The handmade greatness, # 5496 with "DG" on the front. "Atilla" on the lower shank (???). Original tip @ 0.112" on arrival, but I needed to repair the rail-seal and metal flaking off. WWS REPAIRED TIP @ 0.111". Repairs consisted of seal enhancement…
Read MoreHolton ‘Sil-Vae-Lay’ C-Melody, (RAC Reface)- 0.086″ (Archived)
SOLD - These are cast metal then encased in hard rubber, which made an amazingly warm, but powerful. Measures 3.47" in length. This one is black and I had Bob fill a tooth groove and Bob Carpenter has just refaced it to a 0.086". and it's ready to go.
Read MoreKing ‘”King” A #2’ Alto, 1920s-40s (RAC refaced) – 0.078″ (Archived)
SOLD - Recently back from a refacing by Bob Carpenter to a .078". A great hard rubber mouthpiece that will give you a warm full sound. A large chamber on this one.
Read MoreKing ‘”King” T #2’ Tenor, 1950s-70s White, (WWS reface)- 0.086″ (Archived)
SOLD - White plastic; originally setup with Super 20s! Chamber has side walls. The original tip was at 0.070" ...WWS Reface now at 0.086"
Read MoreKing ‘Saxello’ Soprano, 1920s (RAC reface) – 0.063″ (Archived)
Sold - Hard rubber, --large round chamber mpc. It arrived with tiny factory tip. We had Bob Carpenter reface the tip to: Tip measures 0.063". Don't forget the tighter shank from the original settings. Now has good seal and plays great. Original silver plated King ligature too! Item #:WWS/Sarge's Collection
Read MoreLawton ‘Metal – 7 Star B’ Alto – 0.084″(Archived)
SOLD - Unique mouthpiece with a respected tone worldwide. Often picked for projection and tone. Original slide-on ligature and cap.
Read MoreMartin ‘Centennial’ Tenor, Rubber, 1940s (Bob C Reface) – 0.099″ (Archived)
SOLD - From Sarge's Collection - Made for 1 year only, this large chamber mouthpiece is refaced and ready to woe the crowds!
Read MoreMartin ‘Dick Stabile’ Alto, 1940s/50s (RAC refaced 0.083″) associated with Steve Broadus (Archived)
SOLD - A very POWERFUL, warm sounding hard rubber mouthpiece a for darker, large chamber sound(not extra large). It has the ability to push some sound out! (more treble than I though it would have.) Bob Carpenter customized the tip to a .083" (usually a $85.00 job) and it sounds…
Read MoreMartin ‘Slimline’ Baritone, 1950s/60s (RAC reface)- 0.102″ (Archived)
SOLD - Hard Rubber, long baffle with a late slope & medium chamber feel, Bob Carpenter reface Tip at 0.102" with a 27mm facing length. (compare to a Selmer C* at 0.080), These are nice focused jazz/rock mouthpieces! Sorry, no ligature(yet). SOUND: Focused, clean cut. Item #:WWS19.02.951.5-0B40
Read MoreMC Gregory ‘”Master” 4A 16M’ Alto, 1950s early era, EXCELLENT – 0.064″(Archived)
$SOLD 550.00 - Another great mouthpiece. It reminds me a lot of the Model A design--shallow beak. the Script is in excellent condition too! But these have a medium, round chamber--no side walls. Original tip measures 0.064". I recommend our WWS professional work on the tip seal to help this…
Read MoreMC Gregory ‘Gale Companion 4M’ Baritone, 1960s (Refaced) – 0.089″ (Archived)
SOLD - ***A rare mouthpiece, with buttery tones, that made even me sound good.*** On arrival, it had a original tip at 0.079",... NOW 0.089" Tip after repair/reface. Gerry Mulligan played on one, a 5M. .... and we're forced to raise our 4M size, to 5M, if you catch my…
Read MoreMC Gregory ‘Reloplex 3M’ Tenor, 1950s Ser#1864 – 0.080″ (Archived)
SOLD - early era Reloplex with original tip! These are from the Beechler era, and the aluminum shank is a smart addition.
Read MoreMeyer ‘4M – New York’ Tenor, late 1960s/1970s – 0.073″ (Archived)
SOLD - This is the Version 2 of the "New York" models. Original tip - These are still better than the 80s/90s Meyers.
Read MoreMeyer ‘5M “Made in USA”‘ Tenor, 1980s – 0.070” (Archived)
SOLD - These versatile mouthpieces can bridge the gap between swing, trad and jazz; comes with WWS's inspection and minor refacing enhancements to the tip included at the same price as a new model without such. It plays with a controlled presence due to the lower tip size and will…
Read MoreMeyer ‘5M “Made in USA”‘ Tenor, 1980s – 0.077” (Archived)
SOLD - older Meyer with all the good traits/markings of what you want in a 5M Meyer. Smooth and Round tone.
Read MoreMeyer ‘5M “Made in USA”‘ Tenor, 2015 – 0.080” (Archived)
SOLD - A brand new Meyer 5M mouthpiece for classic jazz. Comes with $30-105 value: WWS will inspect and perfect the facing curve, table, and tip seal INCLUDED.
Read MoreMeyer ‘5M’ Tenor, 1980s, Rubber (Archived)
SOLD - Here is one from the early 80s with a warm Meyer, jazz tone. original tip is at 0.076". These versatile mouthpieces can bridge the gap between swing, trad and jazz. no special ligature here. "#5, medium chamber, medium facing length" For cheaper than New prices, I'll inspect and…
Read MoreMeyer ‘6M “J”‘ Baritone, Modern – 0.103” (Archived)
SOLD - A modern hard Rubber, medium chamber, and lower baffle mouthpiece. I can inspect the table and do minor refacing adjustments to create excellent seal. Just ask. Tip at 0.099" (compare to a Selmer C* at 0.080), These have a focus and good core suitable for many jazz players.…
Read MoreMeyer ‘6M “Made in USA”‘ Tenor, late 1970s – 0.082”
SOLD - Post-1972, this one looks vintage, but that look can't be verified by the color alone. The rails look nice and thin and may allow for a great resonance. Also comes with original white box.
Read MoreMeyer ‘6S “Made in USA”‘ Tenor, 1970s (RAC reface)- 0.100”
SOLD - It's tip at 0.100" is now closer to a [Meyer 9]. It plays with a bold presence due to the boost of treble from the baffle during the refacing. i would say this is a ca. 1970's mfg. It's in excellent condition and of course i sent it…
Read MoreMorgan ‘1-C hard rubber’ Soprano, (WWS Reface) – 0.052″ (Archived)
Bilger-Morgan (1-C) hard rubber Bb soprano ser#8647, and I refaced it to a Tip @ 0.052".The tip had some nicks I had to repair, and other minor things I also fixed. (consider that a Selmer D is 0.052") It has a small chamber...not square, not round, but like both--Round Oval-ish. Currently…
Read MoreMorgan ‘Bilger-Morgan – M-2’ Alto, 1940s/50s Ser# 7186 – 0.057″ (Archived)
SOLD - Ser. #7186, original tip @ 0.057", i did repair the tip rail just slightly. I think it stayed right at 0.057"...I wanted it to stay the smallest for a classical player. Medium round chamber. Brass ligature and cap.
Read MoreMorgan ‘Excalibur – 6-FL’ Tenor, New – 0.090″ (Archived)
SOLD - Large Chamber Tenor Mouthpiece, rich and dark tone.
Read MoreMorgan ‘Excalibur – 6-L’ Tenor, New – 0.090″ (Archived)
SOLD - Large Chamber Tenor Mouthpiece, rich and dark tone. "L" Chamber is almost the darkest option. This particular mouthpiece was a play-tester favorite in the mix... IT factor.
Read MoreMorgan ‘Excalibur – 8*’ Tenor, Ser#10,155 (WWS Reface) – 0.106″ (Archived)
SOLD - Sound File - Medium chamber, rollover baffle - Fantastic playing Morgan that received some inspection and perfected in the facing here at WWS. The sound is crisp and clear from from the Medium chamber and bold from the 8* tip. More of the world should try a Morgan.
Read MoreMorgan ‘Jazz 6M’ Alto, 1980s Vintage, Ser#19,759 – 0.073″ (Archived)
SOLD - A true, vintage Morgan mpc here. This is not the newer line of Morgans. (see the '6' over the 'M', and no "USA" on the body.) The sound is crisp and clear from from the Medium chamber and the #6 tip, which matches the intent of the current production models…
Read MoreOther: ‘”Ideal” R3’ Baritone, Rubber – 0.070″ (Archived)
SOLD - "Ideal" R3 baritone: Hard Rubber, medium-large chamber mouthpiece. Tip at 0.070" (compare to a Selmer C* at 0.080), These are nice Classical mouthpieces. The "ideal" mpc on the sound file is only a "3" (not R3). "R" = their larger chamber. This is one that I would offer…
Read MoreOther: ‘[Sil-Vae-Lay] + Composite’ Bb Soprano (WWS Reface) – 0.052″(Archived)
SOLD - Metal table and chamber, composite body and tooth pad. -- semi-rounded(thick table) inner chamber into a Medium Chamber Throat. It arrived with tiny factory tip (0.024!)and damage. WWS had refaced the tip to: Tip measures 0.052". Don't forget the tighter shank on the neck cork like an early…
Read MoreOther: ‘Babbitt Elkhart 5’ Alto, (WWS refaced) – 0.074″ (Archived)
SOLD - easy blower. Good for young player. made of plastic, I refaced it to a 0.074". no lig with it currently. I should be able to find one. Item:WWS10.00.12261.2-0-5CB30
Read MoreOther: ‘Bari 72’ Alto, Rubber – 0.072″(Archived)
SOLD - This is a good quality hard rubber mouthpiece, old enough to have started greening, by the Bari company. It's tip is a 0.072" and it's original and in great condition. It's a powerful mouthpiece, with a large chamber and a light rollover baffle. sorry, no lig.
Read MoreOther: ‘Bari 72’ Soprano, Rubber (Archived)
SOLD - Rubber, arrived with original tip at 0.072". no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. Small round chamber. Ask me to inspect/perfect the tip seal. (New $89) Item #:WWS3S7.34.441.6-008
Read MoreOther: ‘C.T.U – Special #B5’ Alto, (Similar to Woodwind Co.)- 0.059″ (Archived)
SOLD - large chamber. Looks like "woodwind co." design.... compare these when refaced at $250+. Tip .059". (needs reface) Let's talk!
Read MoreOther: ‘Cannonball #5’ Alto, Rubber (Archived)
SOLD - Made of good rubber, arrived with original tip at 0.079". modified baffle, no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. medium chamber. Ask me to inspect/perfect the tip seal. I expect this to be a nice, jazz player. WWS3S7.34.441.6-007
Read MoreOther: ‘Coast R4’ Tenor, 1960-80s, Hard Rubber (Selmer Copy)- 0.085″ (Archived)
SOLD -Refaced elsewhere. We will do work to this mouthpiece. Please inquire for additional information.
Read MoreOther: ‘Double Band’ Alto, (WWS refaced) Plastic (Archived)
SOLD - easy blower. Good for young player. made of plastic, I refaced it to a 0.071". no lig with it currently. I should be able to find one. large square chamber, straight side walls. Plays with clear, cutting focus. Item:WWS00.00.9111.3-CB10
Read MoreOther: ‘Jean Martin’ Tenor – 0.073″ (Archived)
SOLD - vintage hard rubber mouthpiece with good material. "france" on side, It has small chamber. The original tip is at 0.073" ...we can talk about this getting a reface.
Read MoreOther: ‘Kay O’Brien, Double Chamber- Detroit’ Tenor, (RAC reface)- 0.087″ (Archived)
SOLD - Vintage hard rubber mouthpiece with good material; "B6" on the table (like a Woodwind Co.), "A2" on the side, It has small chamber into the throat of the mouthpiece, with a small step-ledge as it opens into the medium chamber. REFACED by Bob Carpenter to a 0.087". This…
Read MoreOther: ‘Marveltone’ Soprano, (WWS reface)- 0.067″
SOLD - Made of hard rubber, it maintains a nice warmth. It arrived with a tiny 0.052 tip so I opened it up to 0.067". It responds very nice with a 2.5 reed and has strong presence and focus. I would call this a 'short shank' style; it also has…
Read MoreOther: ‘No Name- France’ Alto, 1920s/30s (WWS reface) – 0.070″ (Archived)
Vintage no name "france" Reminds me of a Conn Eagle design, vintage hard rubber from 1920/30s, with metal shank ring. "france" on the side. It has a large Chamber and I just opened it up to 0.069-70". It plays nice now with good response. no ligature. WWS24.00.7101.3-C45-03VG00.4
Read MoreOther: ‘No Name- White Composite’ Alto, (RAC reface)- 0.082″ (Archived)
SOLD - Here is a White composite plastic mouthpiece and it's very nice. We got it with its original tip and Bob Carpenter opened it up to a .082" with a 19mm facing... and it is easy to blow, makes a big vintage tone, with just a little edge. It's…
Read MoreOther: ‘No Name- White Composite’ Alto, (RAC reface)- 0.082″(Archived)
SOLD - This is a composite plastic mouthpiece--white with black bite plate cushion installed. This received metal banding repair and refacing from Bob Carpenter and now has a tip size of 0.082" with a 17mm facing. It has a medium chamber with shallow side walls like a Martin, ebolin, or…
Read MoreOther: ‘No Name’ Baritone, (Refaced-TBD) – 0.071″ (Archived)
SOLD - Custom Reface (WWS) included in the price! Hard Rubber; large chamber; looks like a vintage 40s Buescher design. Original tip on arrival at 0.071", however I know you'll want to get it refaced and sized to your desired tip size 0.070-0.103". I plan to pair it with a…
Read MoreOther: ‘No Name’ Baritone, (refaced)- 0.095″ (Archived)
SOLD - Hard Rubber. large chamber. Refaced by G.W. Tip at 0.095", comes with lacquer metal Ligature. Item: WWS33.00.1221.4-4-0
Read MoreOther: ‘No Name’ Baritone, Rubber (WWS Reface) – 0.080″ (Archived)
SOLD - A great large chamber mouthpiece made of hard rubber mouthpiece from the golden era. Now refaced and opened up to 0.080". Notice the lower walls cutout for comfort - cool! Very Low Baffle: it is more straight (lower) than a Conn Eagle. Item #:WWSL4E1.11091.7-005-C45
Read MoreOther: ‘No Name’ Baritone, Slimline – 0.077″(Archived)
SOLD - Slimline plastic with baffle. Inquire for additional information. Item:WWSL4.7W6.12151.6-006
Read MoreOther: ‘No Name’ Soprano, 1970s Hard Rubber – 0.053″ (Archived)
SOLD - High baffle for a loud, bright tone. I did a brief test on this one and actually enjoyed the added boost to the crispness in tone - an easy blower too! Please inquire for additional information. Item: WWSL4.7W6.12151.6-012
Read MoreOther: ‘No Name’ Soprano, Rubber – 0.057″ (Archived)
SOLD - Played in tune on Buescher TrueTone! Rubber, arrived with an original tip that was too closed to enjoy. LARGE CHAMBER, and a slight rollover baffle from the reface. The look of the mouthpiece reminds me of some older King mpcs; but I am not certain on that. Now…
Read MoreOther: ‘No Name’ Soprano, Rubber, Large Chamber (WWS Reface) – 0.059″ (Archived)
SOLD - Large Chamber mouthpiece recommended for vintage sopranos, WWS Reface and a slight rollover baffle from the reface.
Read MoreOther: ‘Noblet “France” N2’ Alto, Hard Rubber – 0.071″ (Archived)
SOLD - medium, round chamber. Made of hard rubber. Email for more information! Item: WWSL4.7W6.12151.6-015
Read MoreOther: ‘Penzel Mueller “New York”‘ Tenor, Hard Rubber – 0.065” (Archived)
SOLD - Is this a from a Brilhart "Hard Rubber" blank??? After a customer noticed the similarities to the Brilhart "Hard Rubber" mouthpiece design.
Read MoreOther: ‘Sumner Acousticut’ Alto, (RAC reface)- 0.082″ (Archived)
SOLD - I was pleased to get this piece, they are really good quality hard rubber, great over all sound. It has a large chamber and was a 5* WS model, but we had Bob Carpenter open it to a .082" tip and it's just perfect now. Item#:SSP
Read MoreOther: ‘Wein’ Tenor, (RAC reface) – 0.101″ (Archived)
SOLD - plastic composite mouthpiece with inner side walls (like a JK slimline), a very nice player with free blowing tip measuring an original 0.101" after Bob met the tip! Looking for a bargain mouthpiece? Ignore the lesser-known name, and you get a good player!
Read MoreOther: ‘York’ Soprano, Rubber, Large Chamber (WWS Reface) – 0.056″ (Archived)
SOLD - Large Chamber - Recommended for vintage sopranos! Rubber, arrived with an original tip that was too closed to enjoy. LARGE CHAMBER, and a slight rollover baffle from the reface. The look of the mouthpiece reminds me of some older Buescher 'pickles' with the ring-lip at the shank; but…
Read MoreOtto Link ‘”Tone Edge” #7’ Tenor, Rubber, 1990s – 0.102″ (Archived)
SOLD - Originally bought new in a large lot from the 1990s. Note, oddly enough, the ligature is a bit loose to be a good fit. Medium Chamber - built for "classic Jazz". [like new, in excellent condition.] This is NOT like the new ones that are hit and miss.…
Read MoreOtto Link ‘Four **** Model – 4*’ Tenor – 0.070″ (Archived)
SOLD - Warm, Vintage Tone all the way - from the vintage era of the late 1930s and made in New York, a metal mouthpiece that is not loud and bright. These have a huge chamber, low baffle and a very reserved, warm tone. Original tip at 0.070", and I…
Read MoreOtto Link ‘Four **** Model – 4*’ Tenor, (WWS Reface) – 0.099″ (Archived)
SOLD - WWS Refaced - In bare brass finish, this mouthpiece plays big and warm. These have a huge chamber, low baffle and a very reserved, warm tone.
Read MoreOtto Link ‘Four **** Model’ Alto, (RAC reface) – 0.073″ (Archived)
SOLD - *From Chadd's Collection* - Warm, Vintage Tone all the way - from the vintage era of the late 1930s, a metal mouthpiece that is not loud and bright. These have a huge chamber, low baffle and a very reserved, warm tone. Serial number: DD 68. These were originally…
Read MoreOtto Link ‘Master Link – 4’ Tenor – 0.064″ (Archived)
SOLD - (Reface to be included) Looking for the vintage Coleman Hawkins sound? This is a good start! Warm, Vintage Tone all the way - These have a huge chamber, low baffle and a very reserved, warm tone. Serial number: R86. It arrived with an original tip at 0.064", consider a…
Read MoreOtto Link ‘RG-Berg Larsen’ Tenor, Rubber – 0.118″ (Archived)
SOLD - A newer hard rubber mouthpiece for the advanced player. very large tip size is not for beginners. The bullet designed chamber is that of the Berg Larsen tone. (my personal bias). Description from the JJ Babbit Company: "Want your music soft and mellow? Bright and edgy? Have it…
Read MoreOtto Link ‘Slant Signature “Tone Edge” #6’ Tenor, Rubber, Series II (Archived)
SOLD - Iconic! - Made of some of the best hard rubber. wide table, side number stamp = series 2 model (of 3). The horizontal table markings are not quite there (not my doing). There will be no hype here. This is one of the most sought after tenor mouthpieces.…
Read MoreOtto Link ‘Super Tone Master – 6*S’ Tenor, FL-Double Band (WWS) – 0.099″ (Archived)
SOLD - A super RARE marked "6*S" - Full Package: Box, ligature and cap! ...on arrival, an improper tip measurement at 082", now a 0.099"!!! (or a Link 6**) It arrived with an improper curve and tip size. Between Bob Carpenter and myself doing a duos worth of the refacing…
Read MoreOtto Link ‘Super Tone Master – 7-‘ Tenor, 1990s (WWS reface)- 0.099″ (Archived)
SOLD - A nice, used STM now refaced to help improve seals and curve. It was originally a 6* and not it is about 0.099" or about 6** or better said: "7-". I leveled the table, helped set the curve, leveled the tip seal, reset the baffle and will do…
Read MoreOtto Link ‘Super Tone Master – 9*’ Tenor, Florida USA (WWS reface)- 0.123″ (Archived)
SOLD - Ultra rare, side-stamped 9* tenor mouthpiece. It arrived with a 0.120" tip that had crooked rails and a poor tip seal. It also had a custom baffle that we took out. The tip and rails looked original, so I must conclude that it took a tough bump along…
Read MoreOtto Link ‘Super Tone Master 6*’ Soprano – 0.061″ (Archived)
SOLD - Used metal Otto link Soprano mouthpiece. Original everything - lig, cap, facing. Adult owned with minor wear. no teeth marks and 24k gold factory plating. It's a multi-genre mouthpiece that can do pop, rock, jazz... etc. New Retail is now $185.00 so come quick!
Read MoreOtto Link ‘Tone Edge 6*’ Baritone, Modern rubber
SOLD - A modern hard Rubber, medium chamber, and lower baffle mouthpiece. I can inspect the table and do minor refacing adjustments to create excellent seal. Just ask. Tip at 0.101" (compare to a Selmer C* at 0.080), These have a focus and good core suitable for many jazz players.…
Read MoreOtto Link ‘Tone Edge 8*’ Alto, Rubber (RAC reface)- 0.090″(Archived)
SOLD - A newer otto link, tip at 0.090", inspected by a master and a rare 8*. Comes with our trial policy as usual. Comes with box, ligature and cap! Item: ConsignBCarpenter
Read MoreOtto Link ‘Tone Master – 2’ Alto, 1940s (Refaced) – 0.065″ (Archived)
SOLD - Smokey vintage tone and vintage pedigree! It comes with original ligature and has a modernized(larger) tip size.
Read MoreOtto Link ‘Tone Master – 4<6*' Tenor, 1940s (RAC Reface) - 0.095" (Archived)
SOLD - From Sarge's Collection! - Full Package: Box, ligature and cap! Recently released to be listed "for sale" from Sarge's Collection. This mouthpiece has serial # M100 on it. It plays like butter. TONE: Huge tone/resonance, "vintage smoke", Dexter Gordon all day. Evenness and sultry. These mouthpieces are known…
Read MoreOtto Link ‘Tone Master – 5’ Tenor, 1940s (WWS Reface) – 0.085″ (Archived)
SOLD - A #5 Tone Master tenor mouthpiece with original ligature - both at about 15% original plating on arrival. This mouthpiece has serial # K72 on it. It arrived with the tip at the original 0.080" tip size and the tip and rails are in good shape but they…
Read MorePhil Barone ‘Rubber NY- V7*’ Tenor, 2007 – 0.102″ (Archived)
SOLD - PB mouthpieces often command $300-600 and this older gem is going to be a bargain. Hard rubber, medium chamber.
Read MorePonzol ‘Custom – 85’ Alto, (WWS Reface) – 0.087″ (Archived)
SOLD - Powerful, Bright, yet with core depth; easy altissimo! Compare at $479 without reface. I thought about stashing it in my Collection.
Read MoreRico ‘Graftonite B5’ Tenor, Black – 0.096″ (Archived)
SOLD - These can be great starter mouthpieces. Rico's description on this new mouthpiece: "RICO ROYAL GRAFTONITE TONE CHAMBERS Tone Chamber Style (A, B, or C): The tone chamber of a mouthpiece is the inside area of the mouthpiece. The size and shape of the tone chamber will change the…
Read MoreRousseau ‘Jazz Model JDX #6’ Baritone – 0.103″ (Archived)
SOLD - A hard rubber mouthpiece that is a great addition to any player and especially those on a budget. I really admire the Rousseau company for making quality mouthpieces that don't break the bank. New pricing is $140-190.00 ... come quick! Marketed Description via WWBW: "The JDX series of…
Read MoreRousseau ‘Metal Jazz -#7’ Alto, Gold, Early Era- 0.081″ (Archived)
SOLD - Version-A of a great jazz mouthpiece option - now discontinued. It comes with original case, ligature, cap, and paperwork! *Chadd stashed one in his collection!
Read MoreRousseau ‘Studio Jazz – SJ7’ Soprano (Archived)
SOLD - Rubber, arrived with original tip at 0.065". no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. slant-wall chamber, special baffle.
Read MoreRunyon ‘Amber 6’ Tenor, (WWS reface)- 0.092″ (Archived)
SOLD - Color is a bit red. number on the table. it arrived original 0.096", but the curve was not right and I knew this mouthpiece had more soul than it was showing (it's a Runyon!). So I refaced it with as much grace as possible; it is now a…
Read MoreRunyon ‘Custom Series #8’ Soprano, Composite – 0.066″
SOLD - A unique Runyon mouthpiece made of a rubber blend. The baffle has a mid-rollover and the chamber shoots into a medium-small round throat. That's geek-talk for: this has a bit of crispness in the projection. I hear that a Rovner 1RXS ligature will fit this mouthpiece.
Read MoreRunyon ‘Metal – 11’ Tenor, Stainless – 0.100″ (Archived)
SOLD - huge tone, and easy blower after reface. This stainless steel mouthpiece is sure to impress.
Read MoreRunyon ‘Red SR #6’ Tenor, Plastic – 0.091″ (Archived)
SOLD - A Santy Runyon classic with a unique baffle design and original ligature.
Read MoreSelmer ‘”JAZZ” E’ Alto, 1980s Silver Plated – 0.077″ (Archived)
SOLD - Silver plated brass mouthpiece from the 80s. excellent I will make this a proper 0.077", then silver plate the repairs. It arrived without a ligature, but I think I have a soprano rovner-like wrap(with metal reed plate) to include.
Read MoreSelmer ‘”JAZZ” E’ Tenor, 1980s Silver-Plated (WWS reface)- 0.084″(Archived)
SOLD - These are fun, from the 80s. They have good focus with a mid, core tone and easy response. It arrived needing minor repair at the tip to level the seal. I did that, and set it up at a correct 'E' tip measuring 0.084", and silver plated it…
Read MoreSelmer ‘”Soloist C”‘ Tenor, 1950s Short Scroll Shank, (WWS reface)- 0.065″ (Archived)
SOLD - Hard Rubber mouthpiece, excellent quality hard. It arrived original but shy of the correct tip size, also with those 2 little nicks in the tip (before photo), so I perfected the seal, and cleaned the tip to set it up at a proper 0.065" for a "C". Good…
Read MoreSelmer ‘”Soloist C*”- now F’ Tenor, 1950s Short Scroll Shank, (Refaced)- 0.090″ (Archived)
SOLD - Won't last! - Great Player! One of the most desired mouthpieces with a modernized tip. Made of excellent quality hard rubber. It arrived with the refacing work done. It has longer facing length at 26mm.
Read MoreSelmer ‘”Soloist C*”- now F*’ Tenor, 1950s Short Scroll Shank, (Refaced)- 0.095″ (Archived)
SOLD - Won't last! - Great Player! One of the most desired mouthpieces with a modernized tip. Made of excellent quality hard rubber. It arrived with the refacing work done. It has facing length at 25mm.
Read MoreSelmer ‘”Soloist C*”‘ Alto, 1950s Short Scroll Shank – 0.068″ (Archived)
SOLD - One of the most loved hard rubber mouthpieces, these are very versatile and can cross many genres. Facing inspected/adjusted here at @WWS, Plays great!
Read MoreSelmer ‘”Soloist C*”‘ Alto, 1963 Short Scroll Shank (WWS reface) – 0.071″ (Archived)
SOLD - TIP at C** now, an iconic mouthpiece with datable pairing to 1963 and with original ligature and cap.
Read MoreSelmer ‘”Soloist C*”‘ Tenor, 1950s Short Scroll Shank, (WWS reface)- 0.076″ (Archived)
SOLD - Hard Rubber mouthpiece, excellent quality hard rubber, horseshoe chamber. It arrived with improper tip size, tip now corrected at 0.070". Good for legit, concert band, or orchestra work, or subtle vintage jazz. I bought this from a friend who loaned it to a student, bless his heart, who…
Read MoreSelmer ‘”Soloist C*”‘ Tenor, 1953 Short Scroll Shank – 0.071″ (Archived)
SOLD - Excellent condition with Original specs.
Read MoreSelmer ‘”Soloist C*”‘ Tenor, 1960s Long Scroll Shank
SOLD - A cool vintage 1960s hard rubber mouthpiece. Original tip measures 0.072". Horseshoe chamber, legit for classical or jazz. Ask me about a ligature.
Read MoreSelmer ‘”Soloist C*”‘ Tenor, 1960s Long Scroll Shank – 0.071″
$179.00 - Good focused tone. Very versatile for concert band, or orchestra work, or subtle vintage jazz. Hard Rubber mouthpiece
Read MoreSelmer ‘”Soloist C*”‘ Tenor, 1970s Long Scroll Shank – 0.076″ (Archived)
SOLD - Hard Rubber mouthpiece, script in good condition! Quality hard rubber, tall-wide horseshoe chamber... Original tip at 0.076". Good focused tone. Very versatile for concert band, or orchestra work, or subtle vintage jazz. Comes with original metal ligature and cap! (valued at $40-80) Item: WWS0W0.0W0.3101.7-0
Read MoreSelmer ‘”Soloist D”‘ Tenor, 1960s Long Scroll Shank (Archived)
Sold - Hard Rubber mouthpiece, script in good condition! (I'll enhance the table script with Gold color), quality hard rubber, tall-wide horseshoe chamber... Original tip at 0.080". Good focused tone. Very versatile for concert band, or orchestra work, or subtle vintage jazz. I wonder if I can find a lig…
Read MoreSelmer ‘”Soloist E”‘ Alto, 1950s Short Scroll Shank – 0.079″ (Archived)
SOLD - Very rare, desirable "Soloist E" + single screw ligature!!! Made of excellent hard rubber, these mouthpieces have the horseshoe chamber and offer a clean, warm, vintage tone that can do many genres - that's probably helped the demand go up. The tip measures 0.079" (+) and is a…
Read MoreSelmer ‘”Soloist E”‘ Tenor, 1950s Short Scroll Shank, (WWS Reface) – 0.088″ (Archived)
SOLD - One of the most loved hard rubber mouthpieces in an ultra-rare Tip size "E"! The soloists are very versatile and can cross many genres and the larger tip on this one will add some punch to the sound (that is something that most people complain about with a…
Read MoreSelmer ‘”Soloist Style” – C*’ Alto, 1960/70s Long Scroll Shank (WWS Reface) – 0.068″ (Archived)
SOLD - Refaced by WWS! - Nice, desirable "Soloist C*". Made of excellent hard rubber, these mouthpieces have the horseshoe chamber and offer a clean, warm, vintage tone that can do many genres - that's probably helped the demand go up.
Read MoreSelmer ‘”Soloist Style” – E’ Alto, 1960/70s Long Scroll Shank – 0.078″ (Archived)
SOLD - Very rare, highly desirable "Soloist E". Made of excellent hard rubber, these mouthpieces have the horseshoe chamber and offer a clean, warm, vintage tone that can do many genres - that's probably helped the demand go up.
Read MoreSelmer ‘”Soloist” – C**’ Tenor, 2010s Long Scroll Shank – 0.080″ (Archived)
SOLD - New era design is a copy of the vintage horseshoe chamber. The horseshoe chamber appears to be between the eras of the short shank and the long shank design -- splitting them 50/50 in width and height! I think there's some real hope in this one!!! Used, in…
Read MoreSelmer ‘Airflow’ Soprano, late 1920s Large Chamber Rubber – 0.044″ (Archived)
SOLD - I think these were originally paired with the Model 22 and 26 selmers. It has a faded marking that could be either "B" or "D" or "L" on the side of the table (going off the 0.043, I would say "B" is correct).
Read MoreSelmer ‘Classic – B’ Alto, 1955 Metal – 0.053″ (Archived)
SOLD - Vintage Selmer mouthpiece - Art Deco logo, fluted side walls, slide on ligature and cap set! It is all in good condition with silver plating intact. The chamber is round and medium-small-medium as was standard on this model.
Read MoreSelmer ‘Classic – E’ Tenor, 1955 Metal – 0.082″ (Archived)
SOLD - well-loved, vintage Selmer mouthpiece that plays great - Art Deco logo, fluted side walls, slide on ligature and cap set!... and in a rare "E", original tip! It is all in good condition with silver plating intact.
Read MoreSelmer ‘Elkhart- New York 2’ Alto, (WWS reface)- 0.069″(Archived)
SOLD - vintage Selmer, marked "2", with links to Zimberoff stencil line of mouthpieces (aka = awesome!)...I just refaced it to 0.069". It plays excellent! It has a medium-large, round chamber with rounded side walls. A great blowing piece! excellent center core tone with projection. My last one was an…
Read MoreSelmer ‘H. Selmer’ Soprano, 1910-25, Rubber – 0.037″ (Archived)
SOLD - The very vintage "H. Selmer Paris" mouthpiece with a large chamber and original tip of 0.037". It can be refaced to your desired tip. These were made from 1885-1925 with changing logos, thus I think this is in the 1910s-25 era. These have a very large chamber with…
Read MoreSelmer ‘Metal Scroll “D”‘ Soprano, Silver (Archived)
Vintage Selmer scroll "D" Bb soprano This is a very well-loved soprano mouthpiece. It is silver plated brass and in good shape. Tip measures 0.052" after I fixed it. I noticed there was a ding in the tip so I will repair it and silver plate the repair. It already…
Read MoreSelmer ‘S-80 “LT” (Larry Teal, C*)’ Tenor, Rubber – 0.071″ (Archived)
SOLD- hard rubber mouthpiece. Original tip measures 0.071". These varied from the other models in the chamber. It is a round medium-small chamber--not square like S80 or horseshoe like the other scroll models. Comes with a vintage, used brass Selmer ligature. I just touched up the gold script too. It…
Read MoreSelmer ‘S-80 C*’ Tenor, 1973 Rubber – 0.067″ (Archived)
SOLD - Originally paired with a late Mark VI from 1973, this early vintage of the S80 was one of the first examples. hard rubber mouthpiece. Original tip measures 0.067". These varied from the other models in the chamber. It is a square chamber. Comes with a vintage, used brass…
Read MoreSelmer ‘S-80 C*’ Tenor, Hard Rubber – 0.067″ (Archived)
SOLD - Good for legit concert playing. Great tip size for a beginning player. Please inquire for additional information. Item:WWSL4.7W6.12151.6-016
Read MoreSelmer ‘S80 – D’ Soprano – 0.052″ (Archived)
SOLD - Hard rubber, focused sound, easy response. It's a bit aged (green) but in good condition. Legit for concert band but able to cross genres too--square chamber mpcs. It arrived with factory 0.050 (incorrect for "D")...Tip will measure ~0.052" after I clean up the seal. It will play great.…
Read MoreSelmer ‘S80 – D’ Soprano, modern – 0.052″
99.00 - Hard rubber, focused sound, easy response. It's a bit aged (green) but in good condition. Legit for concert band but able to cross genres too--square chamber mpcs. It arrived with factory 0.050 (incorrect for "D")...Tip will measure ~0.052" after I clean up the seal. It will play great.…
Read MoreSelmer ‘S80 C*’ Baritone, Rubber – 0.079″ (Archived)
SOLD - A "must have" for concert band! A hard rubber mouthpiece that is a great addition to any player and especially those on a budget. Due to what I know of this mouthpiece, it came with my friend's sax from about 1984-86; aka, this is from the early era!…
Read MoreSelmer ‘Soloist – E’ Soprano, 1950/60s Scroll Shank – 0.053″ (Archived)
SOLD! - One of the most loved hard rubber mouthpieces in an ultra-rare tip size "E"! The soloists are very versatile and can cross many genres.
Read MoreSelmer ‘Soloist – F’ Soprano, 1950/60s Scroll Shank – 0.056″ (Archived)
SOLD - One of the most loved hard rubber mouthpieces in an ultra-rare tip size "F"! The soloists are very versatile and can cross many genres.
Read MoreSelmer ‘White Goldentone – 4’ Tenor, plastic – 0.082″(Archived)
SOLD - vintage Goldentone in excellent original condition with side walls in the chamber landing to a low floor.
Read MoreSteve Broadus ‘N.Y. “Perfected”‘ Alto, (WWS refaced) – 0.072” (Archived)
SOLD - Real smooth & Rich, large chamber S3 model. Script is good. Original Tip measured 0.063" but it received a WWS REFACE to 0.072", it plays really nice and with a bit more focus than the sound file with the 0.055. It reminds me of a S80-C* crossed with…
Read MoreTheo Wanne ‘Ambika 3 – 6*’ Tenor, Rubber – 0.095″ (Archived)
SOLD - The darkest mouthpiece with a low baffle design to blend the best of Vintage and Modern tones. "Built to outplay Theo's very best Vintage New York Tone Master and Master Link Otto Link"
Read MoreTheo Wanne ‘Durga 3 – 8*’ Baritone, Gold – 0.115″ (Archived)
SOLD - (Demo Price - From $795 New) - A bold, fat, booming-control of a mouthpiece; it is more versatile than it looks. Counting model 4, the Durga has many big-name players on it: Leo P (Too Many Zoos), James King (Lady Gaga) and Jamie Michael Harris (Michael Jackson).
Read MoreTheo Wanne ‘Durga 4 – 7*’ Tenor, Rubber – 0.105″
SOLD - The newest Model 4 from Theo Wanne Mouthpieces. If you love Berg Larsen tone, this might be a modern twist. A bold, fat, booming-control of a mouthpiece; it is more versatile than it seems with a warmth (from rubber) and power.
Read MoreTheo Wanne ‘Durga 4 – 8’ Alto, Gold – 0.086″
SOLD - The newest Model 4 from Theo Wanne Mouthpieces. "The DURGA 4 alto has a big, rich and contemporary sound, but due to its unique chamber it also plays amazing ballads."
Read MoreTheo Wanne ‘FIRE – 7’ Alto, Gold – 0.081″(Archived)
SOLD - Bright & Fiery - You can hold it back and then [BAM]; you'll hit the turbo button for the brilliance to blast over the top of the sound volume. Your bandmates will know when you make that choice.
Read MoreTheo Wanne ‘Gaia 1 – 6’ Soprano, Rubber – 0.060″ (Archived)
SOLD - It tends towards a traditional Jazz sound, but is quite versatile; it has a slight roll-over baffle, precision-sculpted inner sidewalls, and TW's True Large Chamber for a simply huge and alive vintage sound.
Read MoreTheo Wanne ‘GAIA 3 – 7*’ Tenor, Gold – 0.105″ (Archived)
SOLD - [Inspired by Dexter Gordon, the Gaia features a medium roll-over Shark Gill™ baffle, precision-sculpted inner sidewalls, and the True-Large-Chamber, which is similar to the vintage mouthpieces of the 1940s, but more evolved in design."
Read MoreTheo Wanne ‘GAIA 3 – 7*’ Tenor, Rhodium – 0.105″ (Archived)
SOLD - (LAST ONE) Investment piece? - Rare, DISCONTINUED Rhodium-plated option (2021: Rhodium market up 1,600%!!!). [Inspired by Dexter Gordon, the Gaia features a medium roll-over Shark Gill™ baffle, precision-sculpted inner sidewalls, and the True-Large-Chamber, which is similar to the vintage mouthpieces of the 1940s, but more evolved in design].
Read MoreTheo Wanne ‘GAIA 3 – 7*’ Tenor, Rubber – 0.105″ (Archived)
SOLD - SALE PRICE (From $675 New) - [Inspired by Dexter Gordon, the Gaia features a medium roll-over Shark Gill™ baffle, precision-sculpted inner sidewalls, and the True-Large-Chamber, which is similar to the vintage mouthpieces of the 1940s, but more evolved in design.]
Read MoreTheo Wanne ‘NY Bros 2 – 5’ Alto, – 0.071″ (Archived)
SOLD - Responsive Flexibility with Power - Ready to play right out of the box! Why buy a $160 Meyer 5 that needs a reface?!
Read MoreVandoren ‘B75’ Baritone, Rubber (Archived)
SOLD - hard Rubber. high baffle, bullet cut-out. Original factory tip at 0.107", comes with Rovner ($30!) Ligature! Big Sound! ***Try $239 for one new!
Read MoreVandoren ‘V16 – #S8’, Soprano – 0.071″ (Archived)
SOLD - Rubber, arrived with original tip at 0.071". Came with cap, no ligature, on arrival. Ask me for extras if I can help with the ligature. CHAMBER = HORSE SHOE (like vintage Selmer soloist)
Read MoreVandoren ‘V16 Metal T45-13AL’ Tenor, Gold – 0.095″ (Archived)
SOLD - Compare at $260-350 for T6 model(0.098") - It plays with a controlled presence & power; it has a focused clarity and will add a fun boost to your volume. "...made with the legendary "Bell Metal" brass, then plated with 24-karat gold."
Read MoreVandoren ‘V5 – S35’ Soprano, HR – 0.071″ (Archived)
SOLD - Jazz mouthpiece, round chamber, Like New store demo with original box.
Read MoreVigilante ‘Annihilator NY’ Tenor, Engraved – 0.111″(Archived)
GONE - Huge tone!!! - Sound File - Have you been looking for a Guardala?! This is one of the closest options in the current market... and it can save you a little money instead of an original. It also reminds me of my hard rubber Berg but with a…
Read MoreVito ‘[Melodia] – R3’ Soprano – 0.043″ (Archived)
SOLD - Rubber, arrived with original tip at 0.043". no ligature, on arrival. Small round chamber.
Read MoreVito ‘[Melodia] – R3’ Soprano – 0.044″ (Archived)
SOLD -Rubber, arrived with original tip at 0.072". no ligature, on arrival. Ask me for extras if I can help with the ligature. near-new condition. Small round chamber. Ask me to inspect/perfect the tip seal. Item: WWS3S7.34.441.6-008
Read MoreVito ‘Melodia- 3V’ Alto, (WWS reface)- 0.071″ (Archived)
SOLD - Medium chamber. I refaced it to a 0.071". (reface in Progress). I think this is going to be a great player with a classic Meyer tone, but with more focus. Item:WWS00-00C60-02
Read MoreWagner ‘5’ Alto, Silver Plated Brass – 0.071″ (Archived)
SOLD - Really strong, German made pieces. Like a cross between a Berg and a Dukoff. excellent condition. Tip size at 0.071". sorry no ligature, but ask me if I have a wrap that may fit!
Read MoreWagner ‘JK Blank’ Alto, Rubber – 0.061″
SOLD - here's another winner!--a cheap option: hard rubber. No script. medium-large chamber...poised for a nice, crisp, jazz tone. Originally 0.061" on arrival, It will get reface and play crisp and clear! Likely to about 0.063-068"...or check in to see if you can request the size! Comes with one screw…
Read MoreWagner ‘Slimline – 5’ Alto, Rubber (Refaced)- 0.081″ (Archived)
SOLD - An excellent JK/Wagner Slimline, refaced by Ed Zentara; comes with original single-screw ligature!
Read MoreWagner ‘Slimline 3’ Tenor, 1960/70s Slimline, Hard Rubber – 0.065″ (Archived)
SOLD - a really nice hard rubber mouthpiece with no brand logo which was common. It arrived at an original small tip 65. So we can talk about a reface. These have a mild warmth, nice focus, but big tone from the tip. sound is strong in the MID range,…
Read MoreWagner/Keilwerth ‘Slimline 3’ Tenor, (WWS reface)- 0.080″ (Archived)
SOLD - a really nice hard rubber mouthpiece with the no logo. It arrived at an original small tip 3 @ 0.062". I refaced it to 0.080". These can have a mild warmth, nice focus, but big tone from larger tips. sound is strong in the MID range with a…
Read MoreWolfe Tayne ‘3*’ Alto, Rubber, (WWS reface)- 0.079″ (Archived)
SOLD - FANTASTIC SOUND! WWS refaced 0.080"(photos of reface "in progress"), medium chamber with side walls. I fully expect, due to the design of this one, that it will be a VERY NICE BLOWER! I will give it the extra time for a precision reface.
Read MoreWolfe Tayne ‘7*’ Alto, Nickel Plated Brass (Archived)
SOLD - Looks like nickel plated brass, arrived with original tip at 0.093". wrap ligature, on arrival. good condition. large square chamber. TONE: This was a shocker! It was rich, not 'trebly' or shrill on a 2.5 Alexander reed with a great response. WWS3S7.34.441.6-007
Read MoreWolfe Tayne ‘Gold 4*’ Alto, Gold Plated – 0.072″ (Archived)
SOLD - Gold plated alto mouthpiece in excellent shape. The machining on the table (horizontal) indicates it's the 'older' version of the WT mouthpieces. I am not sure if they were using the same machining as Brilhart though (horizontal in the 1970s). SOUND: They maintain easy playability with a centered…
Read MoreWoodwind ‘Meliphone Special – B5*’ Alto, (Mojo Refaced) – 0.080″ (Archived)
SOLD - Refaced by Mojo. This mouthpiece has straight side walls into a larger throat/chamber than narrows back to the neck bore size. Terrific material. The Mojo reface looks excellent, as always, and his markings are: "46, 080, Mojo +5".
Read MoreWoodwind ‘Sparkle Aire B5’ Tenor, Rubber, “France” (Archived)
SOLD - vintage hard rubber mouthpiece with good material. "france" on side, It has large round chamber. The original tip is at 0.071" ...we can talk about this getting a reface.
Read MoreWoodwind ‘Sparkle Aire B5*’ Tenor, (RAC reface)- 0.090″ (Archived)
SOLD - Terrific hard rubber material and good classic design. Large chamber makes for a big vintage sound. LATE DESIGN for Woodwind models: this body has similar shank design as Selmer Goldentone models, but the interior scream "Woodwind Co. sound" all the way! Original facing "B5*" marking, arrived original tip…
Read MoreWoodwind ‘Special – Made For Dick Stabile’ Alto – 0.065″ (Archived)
SOLD - Straight side walls (Brilhart) into a larger throat/chamber than narrows back to bore size. Identical to others yet without the metal shank band, thus cheaper.
Read MoreWoodwind ‘Special – Made For Dick Stabile’ Alto – 0.065″(Archived)
SOLD - A unique design: Straight side walls (Brilhart) into a larger throat/chamber than narrows back bore size. Terrific material. I love all Steel Ebonite mouthpieces and this one is unique at that. The added ring at the shank is a great addition for long-term shank protection - the ring…
Read MoreWoodwind Co. ‘Chester Hazlett’ Tenor, 1930s/40s (RAC reface)- 0.090″ (Archived)
SOLD - From Chadd's Collection - Another rare mouthpiece listed, it was named after the saxophonist in the Whiteman Orchestra of the 30s and 40s. Terrific material and good classic design...very similar to "The Woodwind Co." models... Large chamber makes for a big vintage sound. But also more suitable for…
Read MoreWoodwind Co. ‘New York “B3*”‘ Baritone, (WWS Reface) – 0.090” (Archived)
SOLD - Terrific hard rubber material and LARGE CHAMBER makes for a big, vintage sound. I love these on alto and tenor. This one was bought and customized with reface for a bass sax player.
Read MoreWoodwind Co. ‘New York “B4*”‘ Alto – 0.054” (Archived)
SOLD - Terrific hard rubber material and good classic design. LARGE CHAMBER makes for a big vintage sound. Original facing "B4*" marking, arrived original tip at 0.054". Reface?: You can help request the sizing of it. These are some of my favorite mouthpieces and you can bet that I'll copy…
Read MoreWoodwind Co. ‘New York “B5*”‘ Baritone, (RAC reface)- 0.098” (Archived)
SOLD - HARD RUBBER, LARGE CHAMBER. arrived with original tip 0.060, Had Bob C do a Reface and repairs. NOW 0.098"+ .... Comes with ligature. Item:WWS0E0.00.12171.5
Read MoreWoodwind Co. ‘New York “B6″‘ Tenor, (BP Refaced) – 0.110” (Archived)
SOLD - Terrific material and good classic design. Large chamber makes for a big vintage sound. It arrived with the engraved "BP 0.110" on the side with excellent finish work by Brian - Super professional! I liked it but I felt that it was missing ... just that 'extra umph'.…
Read MoreWoodwind Co. ‘New York “B6″‘ Tenor, (RAC reface) – 0.105” (Archived)
SOLD - Terrific material and good classic design. Smaller chamber makes for a focused vintage sound. Bob Carpenter just opened this one up to a easy blowing .105" with a 23mm facing length.
Read MoreWoodwind Co. ‘New York “J5″‘ Alto, (WWS reface)- 0.078” (Archived)
SOLD - Terrific material and good classic design. Larger chamber makes for a big vintage sound. reminds me of a slant signature sound but a but more 'round'/less focus with the WWS Refaced tip at 078". I have to say, I did my very best to copy my personal Woodwind…
Read MoreWoodwind Co. ‘New York “J5″‘ Tenor, (WWS Reface) – 0.098” (Archived)
SOLD - Large chamber makes for a big vintage sound. Now it has a 0.098" tip and I left some baffle material to help give it punch and treble/presence. Original facing "J5" marking.
Read MoreWoodwind Co. ‘New York “N3″‘ Alto – 0.062” (Archived)
SOLD - Terrific material and good classic design. Larger chamber makes for a big vintage sound. reminds me of a slant signature sound but a but more 'vintage-nasal' with the Original tip size of 0.062".
Read MoreWoodwind Co. ‘New York #5’ Tenor, Brass, Ser# X359 – 0.093″ (Archived)
SOLD - Here is another awesome, rare mouthpiece. heavy body brass design, ser# "X359". This mouthpiece blows really well and the tip is 0.093". On arrival it was a 0.092" but the table and tip seal needed my light touch. I wanted to keep this as true to the #5…
Read MoreWoodwind Co. ‘New York #5* ‘ Tenor, Rose Gold-Plated, Ser#X324 (reface)- 0.105″ (Archived)
SOLD - Here is another awesome, rare mouthpiece. heavy body brass design, ser# "X324". This mouthpiece blows really well and the tip is 0.105" (refaced by "a guy") and then improved seal by me. The bite plate is a replacement (black). I opted to buff off refacer's name because I…
Read MoreYanagisawa ‘Metal – #9’, Soprano, Silver (Archived)
Yanagisawa #9, silver metal Bb Soprano silver plated brass, with a nice #9 (!!!) arrived with original tip at 0.071". no ligature, on arrival. Ask me for extras if I can help with the ligature. used condition--It will shine up nicely! square chamber. These are well-loved and have a nice clean…
Read MoreYanagisawa ‘Metal #6’ Tenor, silver – 0.088″ (Archived)
SOLD - These are well-loved and respected mouthpieces. This one is marked down from the $200+ pricing for the silver wear. Also, there is a clear tooth pad guard installed. SOUND: They maintain easy playability with a centered tone that still has controllable power it in. Comes with replacement, brass…
Read MoreYanagisawa ‘Metal #7’ Alto, Silver – 0.091″(Archived)
SOLD - These are well-loved and respected mouthpieces. This one is marked down from the $200+ pricing for the silver wear. SOUND: They maintain easy playability with a centered tone that still has controllable power it in. Comes with replacement, ligature.
Read MoreYanagisawa ‘Rubber #6’ Alto (Archived)
SOLD - Medium round chamber with original tip at 0.074". Nice core tone for many genres.
Read MoreYanagisawa ‘Rubber #6’ Baritone – 0.093″ (Archived)
SOLD - HARD RUBBER, medium-small CHAMBER. arrived with original tip 0.093". Comes with nice ligature: Rovner Platinum $65.00 (with brass or gold plated top rib and screw; ligature is not like the solid platinum look of the $105 lig) Item:WWSL4W6.67.5271.6-03
Read More